[tom @ eas]

Originally Posted by F30_335

I have rear fog lamp button from factory.
I meant maybe if I have rear fog lamp, coding is different. Without coding, I have blinking in 3 place. Now only stop lamp blinking.

Just performed another install earlier this week with the coding steps as outlined above. No issues on this end.

[F30_335]

Originally Posted by tom @ eas

Just performed another install earlier this week with the coding steps as outlined above. No issues on this end.

I will try to update software in my car with dealer and than maybe it will work.

[Alan_Tan]

may i know where you buy the wiring kit?

[tom @ eas]

Originally Posted by Alan_Tan

may i know where you buy the wiring kit?

Just replied to your PM, we have the F30 LCI Taillamp wiring kits on our website for those interested.

[F30_335]

Originally Posted by F30_335

I will try to update software in my car with dealer and than maybe it will work.

UPDATE

Dealer uploded new software in my F30. He can add rear led options and now no blinking. Not need to coded by Esys.

[tom @ eas]

Originally Posted by F30_335

UPDATE

Dealer uploded new software in my F30. He can add rear led options and now no blinking. Not need to coded by Esys.

Theoretically, another option would be advancing the build date and recoding REM module.

[Alan_Tan]

Originally Posted by F30_335

UPDATE

Dealer uploded new software in my F30. He can add rear led options and now no blinking. Not need to coded by Esys.

that means the coding from tom is not work on the car that with original come with rear fog lamp ?

my dealer not willing to update for me

[tom @ eas]

Originally Posted by Alan_Tan

that means the coding from tom is not work on the car that with original come with rear fog lamp ?

my dealer not willing to update for me

Coding is universal for all F3X REM modules.

Dealers cannot perform this coding, you will need to locate a coder in your area.

[F30_335]

Originally Posted by Alan_Tan

that means the coding from tom is not work on the car that with original come with rear fog lamp ?

my dealer not willing to update for me

I am still not sure where was problem. Maybe becose I have LED front fog lamps. Dealer said he can add front LED fog lamps option or rear led lamp. But when he tried to add two options, front led fog lamps not worked.
I was retrofit surround view in dealer. When dealer updated software, he just add rear led option. It was free for me.
But you should try to code them.

Originally Posted by tom @ eas

Coding is universal for all F3X REM modules.

Dealers cannot perform this coding, you will need to locate a coder in your area.

Dealer not use e-sys. But he can add new option during software update.

[cailas]

What is the difference between this instalation type?
http://f30.bimmerpost.com/forums/sho....php?t=1174188


What does this aditional wire?

https://c2.staticflickr.com/6/5634/2...10a7be2e_b.jpg

[tom @ eas]

Originally Posted by cailas

What is the difference between this instalation type?
http://f30.bimmerpost.com/forums/sho....php?t=1174188


What does this aditional wire?

https://c2.staticflickr.com/6/5634/2...10a7be2e_b.jpg

These supply power to the Celis portion, covered in the DIY.

[BMW_1900]

Originally Posted by tom @ eas

These supply power to the Celis portion, covered in the DIY.

Your method shows no modification of the box near the battery as the other DIY method shows? Any reason why?

[jbeer]

Hi, I hope you can help me?

I stupidly decided to be over curious today and starting looking at how the rear lights could be changed and a stupidly started to remove one of the rear tailgate lights, it lifted slightly and as it wasn't moving tried to put it back.... I got the part nearest the centre of the tailgate to sit flush but the edge nearest the side of the boot lid is slightly proudness as if it's not sitting flush, it is only slight but I know it's there.

How easy is it to remove and refit the lights? Is anything likely to snap etc...

[tom @ eas]

Originally Posted by jbeer

Hi, I hope you can help me?

I stupidly decided to be over curious today and starting looking at how the rear lights could be changed and a stupidly started to remove one of the rear tailgate lights, it lifted slightly and as it wasn't moving tried to put it back.... I got the part nearest the centre of the tailgate to sit flush but the edge nearest the side of the boot lid is slightly proudness as if it's not sitting flush, it is only slight but I know it's there.

How easy is it to remove and refit the lights? Is anything likely to snap etc...

Very simple, follow the steps outlined in this DIY in reverse to reinstall.

[jbeer]

Thanks for that, however the guide doesn't show how the light unit comes out, mine was a little resistant so is it a case of lifting it up from the edge closet to the centre in an ark motion?
The resistant I felt is that some form of sticky rather strip to stop water coming in? If so do I need to replace this if I take the light unit out to realign it?

ThNks and sorry for all the questions

[tom @ eas]

Originally Posted by jbeer

Thanks for that, however the guide doesn't show how the light unit comes out, mine was a little resistant so is it a case of lifting it up from the edge closet to the centre in an ark motion?
The resistant I felt is that some form of sticky rather strip to stop water coming in? If so do I need to replace this if I take the light unit out to realign it?

ThNks and sorry for all the questions

You're likely referring to the foam gasket. Take care when removing the lamp so the gasket isn't damaged, it can be reused.

[jbeer]

Many thanks

[G20 WestMid]

Hi do you sell the harness and do you have a link?

Also do you need to wire in to the REM module?
as some people have done.

[kevin @ eas]

Originally Posted by F30 AAR

Hi do you sell the harness and do you have a link?

Also do you need to wire in to the REM module?
as some people have done.

Here is the link

https://europeanautosource.com/bmw-l...-3-series.html

[Nomana]

Without coding, lci tail light still work but error blink show?

[tom @ eas]

Originally Posted by Nomana

Without coding, lci tail light still work but error blink show?

Sorry, didn't get the notification on this. You will receive bulb out errors and occasional flickering of the new taillights (vehicle BulbCheck process) until coding is applied.

[Aarie]

Great DIY.

I purchased the BMW OEM harness for the F30 LCI tail light retrofit. The harness allows for the left and right inner turn signals to plug directly into the REM.

Can some provide the REM FDL coding that is required for these lights to work via the REM?

Thanks