05-11-2016, 11:44 PM | #1 |
First Lieutenant
86
Rep 315
Posts
Drives: 2013 335i M Sport
Join Date: Mar 2015
Location: Concord, CA
|
Tool for cutting interior trim?
Anyone done mods that require cutting holes in trim pieces? What is best thing to use? Dremel? What kind of bit?
I'm going to want to cut a hole, somehow, in some part of trim to mount a bass control knob. Thank you
__________________
2013 335i l Estoril Blue | M Sport l MPPK | M Perf Exhaust | M Perf Brakes l Adaptive M Suspension l DAP | DHP | Premium | Tech
My Build -> Mod Journal |
05-12-2016, 02:06 AM | #2 |
Schmollbraten
12509
Rep 1,985
Posts |
To avoid frizzled edges I would suggest you to use a heated scalpel to cut in superficially the switch borders. After that feel free to grind out the rest with a dremel. But I wouldnt try to drill out the whole hole and grind the remaining material.
__________________
Citizen of ///M - Town, where too much is just right Some say, that my scrotum has its own small gravity field and when Im slowing down that brake lights come on at my buttox |
Appreciate
0
|
05-12-2016, 07:43 AM | #3 |
Major
525
Rep 1,231
Posts |
also if you must drill or cut with either dremel or drill use masking tape, mark on the masking tape and cut or drill through it, it will help you with a cleaner finished cut or hole
__________________
Last edited by IndotagSwizz; 05-12-2016 at 07:44 AM.. Reason: misspelled |
Appreciate
0
|
05-12-2016, 08:14 AM | #4 |
Major General
4516
Rep 8,942
Posts |
Are you mounting a knob requiring a round hole or a switch requiring a rectangle or square? If round in addition to the masking tape, which I would do as well, I've had good luck heating the back end of the drill bit with a torch then pressing it into the trim where you will eventually drill. Melted the gloss finish and eliminated any splintering.
__________________
2022 Macan S
2016 F31 328i xDrive Sport Wagon 2006 E46 330ci ZHP Convertible |
Appreciate
0
|
05-12-2016, 09:11 AM | #5 |
A family of bimmers
2745
Rep 7,741
Posts |
to cut through vinyl, run the drill in reverse if using a hole saw bit. we do this when installing new speakers into vinyl panels. Also use painters tape to mask off where you are cutting
__________________
2018 PB/Black G01 X3M40i | 699M | ZDA | ZPP | ZPX | Maxton front lip | X3M vents | 15mm Spacers | Diamond G20 style grills |
Appreciate
0
|
05-12-2016, 12:51 PM | #6 |
First Lieutenant
86
Rep 315
Posts
Drives: 2013 335i M Sport
Join Date: Mar 2015
Location: Concord, CA
|
Awesome tips, thank you all!
Not sure what shape the switch setup is, won't know until my kit gets here.
__________________
2013 335i l Estoril Blue | M Sport l MPPK | M Perf Exhaust | M Perf Brakes l Adaptive M Suspension l DAP | DHP | Premium | Tech
My Build -> Mod Journal |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|