[betlion]

Definitely will rub

[cmonter3323]

hey guys' thinkin of running 20x8.5 et 35 and 20x10 et 35 in the rear. will I rub in the rear? that is the only offset in the wheel i want has anyone ran these offsets before?? thanks for your help!!!

[Jimminez]

Originally Posted by cmonter3323

hey guys' thinkin of running 20x8.5 et 35 and 20x10 et 35 in the rear. will I rub in the rear? that is the only offset in the wheel i want has anyone ran these offsets before?? thanks for your help!!!

The front won't be a problem, but for the rear some answers are needed:
1. Are you lowered and if so, how low do you plan on being?
2. What tire size(s) do plan on running?
3. What wheel is it that you can't get a different size? There may be other styles that are similar that provide a better fit.

For reference, this is what a 19x9.5 ET35 looks like relative to the fender (MadZarBMR's car - more pics here) . A 10" ET35 will stick out another 6mm.

[cmonter3323]

Originally Posted by Jimminez

The front won't be a problem, but for the rear some answers are needed:
1. Are you lowered and if so, how low do you plan on being?
2. What tire size(s) do plan on running?
3. What wheel is it that you can't get a different size? There may be other styles that are similar that provide a better fit.

For reference, this is what a 19x9.5 ET35 looks like relative to the fender (MadZarBMR's car - more pics here) . A 10" ET35 will stick out another 6mm.

Thank you for your reply Jimminez !
1. I probably wont go too much lower, probably use a conservative lowering spring like AC Schnitzer which will lower it 20mm at most

2. I am planning on running 235 and 265 tires, I know some people are doing 275 in the rear but i believe my tire size would be more conservative due to the springs I will use.

3. it is the giovanna lucca wheel, http://audiocityusa.com/shop/20-22-G...-Shipping.html the et 35 on the rear is the big issue, i dont want it to poke, if you have any recommendations, they are welcome.

these will be on my 428i f36! thanks, I want to measure twice and cut once haha

[xxxjecxxx]

Originally Posted by MrMikeHenry

What lip?

[karan5ingh]

Originally Posted by Sedan_Clan

I need some professional photos:

Nice wheels mate !
Are those 20 inchers ? Did you get the OEM genuine or the replicas ?

[Sedan_Clan]

Originally Posted by karan5ingh

Nice wheels mate !
Are those 20 inchers ? Did you get the OEM genuine or the replicas ?

They are reps by Avant Garde.

[VELGEN WHEELS]

[cmonter3323]

Originally Posted by cwazy1

heres mine.. slightly stanced

what tire sizes

[PETERYanni]

Hay guys i wanted to ask you a question as you are the most BMW experts out there.. I wanted to see what you guys think of buying the M Performance front lip for the 435i Coupe from **********s http://www.**********s.com/bmw-f32-4...p-spoiler.html which is a lot cheaper than the original one, is it a good idea. Please take in consideration that my car is a lease!

[Thanhstar]

Wheels go on tomorrow!
(TE37SL)

[efunnra]

Originally Posted by Thanhstar

Wheels go on tomorrow!
(TE37SL)

excited to see the results...

[Camnyc]

image1 by camerong001, on Flickr


19x9.5 et25 front 225/35/19
19x10.5 et25 rear 265/30/19

bc br coilovers custom valved/swift springs 10k front 14k rear

[squidlyboy]

Originally Posted by Camnyc

image1 by camerong001, on Flickr


19x9.5 et25 front 225/35/19
19x10.5 et25 rear 265/30/19

bc br coilovers custom valved/swift springs 10k front 14k rear

Love your setup bro - sick! There's no way though you going 10.5 and et25 without serious rub or fender work. I have BCs, 9.5 rear et35 and i'm right on the edge. You're hanging about a full INCH of additional poke there

can you post more pics dude? i wanna see some side shots. Total dope!

[Camnyc]

Rear camber arms, @ 4degrees of negative camber with a slight pull of the quarters, if i didnt tell you they are pulled, you wouldnt notice.

Ill try to get some hq pics this week.

[squidlyboy]

Originally Posted by Camnyc

Rear camber arms, @ 4degrees of negative camber with a slight pull of the quarters, if i didnt tell you they are pulled, you wouldnt notice.

Ill try to get some hq pics this week.

ahh ok. i didn't know F30 rears were even adjustable, let alone going past 3 degrees. You running Megan racing arms?

Yah, more pics please

[Camnyc]

Yea. You can get 3 degrees out of the factory adjustment. I needed the megan arms to add another degree

[335i_4D]

Short time with some stance...
Had to remove the springs, sadly

[Boxtyp3]

Originally Posted by Thanhstar

Wheels go on tomorrow!
(TE37SL)

How were you lowered? Coilovers, bags or spring only? Very nice!

[squidlyboy]

Originally Posted by Camnyc

... with a slight pull of the quarters, if i didnt tell you they are pulled, you wouldnt notice.

Ill try to get some hq pics this week.

With an inch more of poke, i figured an extra degree of camber aint gonna be enough to keep it tucked. I figure thats why you did the profile shot. I wanna see pics of the pull, from the rear.

Because if you shot the pic from the rear ... i figure i'd see this

[haraldb]

not that many f36's here I will lower it some more soon

[kenny_f30]

here some pics of how she sits now.

And here is some test fitting the wheels 😁😁😁
the front 18x10
the rears 18x11.5


there was no camber adjustment on the rear. so once I get my camber arms I will be able to sit on the lip.
only problem I have is the fronts got to pull and add some camber to it some how lol