03-28-2020, 07:56 AM | #1 |
New Member
0
Rep 5
Posts |
bootmod3 unsuccessful flash attempt...
Today was a bad day for me and my car....
I've bought a license from bm3. Activated a car. Downloaded Stage 1 93 octane tune and tried to flash. But flash attempt was unsuccessful and I've got a message "Flashing failed before the start. Please try again." I've tried multiple times and after that I done an online recode. It clears most of error received during flash but Drivetrain malfunction popup again... Than i decided to hook off everything, turn off car completely, even disconnected a battery. And after I've switched it on i've got no error. But when i start engine. It works for 3-5 seconds and after that it was stalled. I've read error codes and I've got 11B010 and CDBB1D. And after that my car didn't start. Starter is trying but looks like fuel does not feed into the engine. As I know bm3 support is not working for weekends. Is there any way I can fix it myself? Last edited by devrus; 03-28-2020 at 08:25 AM.. |
03-28-2020, 11:10 AM | #2 |
BimmerPost Supporting Vendor
24186
Rep 190,795
Posts |
Create a ticket with them, they do respond in the weekends
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
06-25-2021, 04:35 PM | #4 |
Registered
0
Rep 1
Posts |
This thread is really old but I have the same thing happening. What ended up being the issue? I flashed to stage 2 93 at work drove home perfectly fine. Realized the burbles were annoying so I tried flashing back when I arrived home. Now it’s just sitting here. Flash says disc was full but it’s showing a drivetrain malfunction. The code 11B010. Car cranks but seems like it isn’t getting fuel. Tuner with bootmod3 and the just keep telling me to charge my battery then reflashed but I have done that several times.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|