01-02-2018, 08:20 AM | #1 |
Major
362
Rep 1,407
Posts
Drives: 13' F30 328i 6MT
Join Date: Mar 2012
Location: NJ
|
Loose Headlight Washer Asembely
Anyone ever encounter this? I know the covers can pop off and I also recently found out in really cold weather its common for them to freeze. Does anyone know how they are held in?
From looking at the pics I found here it looks like they clip in : https://www.ecstuning.com/b-genuine-...e/61677275657/ I gave it a little nudge ( nothing super hard ) and now the assembly is all wobbly in the hole I can semi pull it foward into place but barely tapping it makes it loose again. No idea what I did or how this became loose, Is this common or easlily fixed without taking the whole bumper off? Im hoping you can access from the wheel well or Im just overlooking an easy fix. Thanks in advance.
__________________
'13 F30 328i Sport 6MT | '18 G01 X3 xDrive30i | '95 E36 325i Vert 5MT
92 Sentra SE-R SR20DET DET Build Thread 89 E30 325is [sold & missed] |
02-17-2018, 09:40 PM | #2 |
Major
362
Rep 1,407
Posts
Drives: 13' F30 328i 6MT
Join Date: Mar 2012
Location: NJ
|
Turns out on the factory bumper it clips in, When you install an aftermarket "SELMA" Bumper they ask you to 3M Tape it to the inside and not like the factory config. So the body shop most likely didnt prep it correct and it fell into the bumper..
They re-did it for me ( go in thru wheel well ) and now its perfect.
__________________
'13 F30 328i Sport 6MT | '18 G01 X3 xDrive30i | '95 E36 325i Vert 5MT
92 Sentra SE-R SR20DET DET Build Thread 89 E30 325is [sold & missed] |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|