[IllSic_Design]

Filled out data for my car, TIC is outlets?? No spot for modded turbos?



EDIT: Filled out my info(twice), page says it auto-saved data so I close the page and go back to it and it didn't save any of my data???

[FaRKle!]

Originally Posted by IllSic_Design

Filled out data for my car, TIC is outlets?? No spot for modded turbos?



EDIT: Filled out my info(twice), page says it auto-saved data so I close the page and go back to it and it didn't save any of my data???

TIC is Turbo to Intercooler pipe.

I just realized I have the same issue as you, where if I open it up in my sheets, it doesn't update the original N26Ghost made. I just commented on his sheet what the cells should be for my vehicle (it does save those).

[IllSic_Design]

Well here's my mods if the OP wants to add them:

Trim: Sport
Color:Alpine White
Motor: N54
Turbos: Turbo Lab Upgraded OEM turbos( 39.6mm x 56mm CW + 9 blade Drop in Turbine 35mm x 40 TW)
Tune: MHD Flex fuel @ ~E50
Charge Pipe: OEM
Intercooler: ARM 5" stepped
Downpipe: ARM catless
TIC Pipe: VRSF Silicone
Turbo Inlet: VRSF Silicone
DV: OEM
Intake: Spectre DIY DCI
Exhaust: Eisenmann Race axle back
Oil Cooling: OEM hot climate oil cooler
Fueling: Fuel-It Stage 2 LPFP
Catch-Can: RB Turbos low side

[N26Ghost]

Originally Posted by IllSic_Design

Well here's my mods if the OP wants to add them:

Trim: Sport
Color:Alpine White
Motor: N54
Turbos: Turbo Lab Upgraded OEM turbos( 39.6mm x 56mm CW + 9 blade Drop in Turbine 35mm x 40 TW)
Tune: MHD Flex fuel @ ~E50
Charge Pipe: OEM
Intercooler: ARM 5" stepped
Downpipe: ARM catless
TIC Pipe: VRSF Silicone
Turbo Inlet: VRSF Silicone
DV: OEM
Intake: Spectre DIY DCI
Exhaust: Eisenmann Race axle back
Oil Cooling: OEM hot climate oil cooler
Fueling: Fuel-It Stage 2 LPFP
Catch-Can: RB Turbos low side

I will add these, thanks.

[N26Ghost]

Originally Posted by cobra2814

Definitely in on this, as long as it's on a weekend! Also, I double checked on my car, 6th gear is actually the 1:1 ratio. I assume the dyno can handle the higher speeds?

Indeed it can. My first few runs at this shop were in 6th and the needle indicated well over 100 MPH by the end of the gear. No problemo.

[N26Ghost]

Originally Posted by bmwchue

ive never done a dyno before. what would be the cost?

As of now, the cost is $60/person. It may go down further, but at least $60.

[N26Ghost]

Reminder, please fill out your car details on the spreadsheet located here:

https://f30.bimmerpost.com/forums/sh...75&postcount=1

These folks need to update, also please confirm your interest. I haven't heard from you in a while and if I can't get a confirmation before the 15th, I will have to remove you from the roster.

alainv1029
MrZeeMan

Just need to know the color and trim level for Divbetic

If you're having issues with the doc, reach out to me and I can update it for you.

Thanks in advance.

[Divbetic]

Originally Posted by N26Ghost

Just need to know the color and trim level for Divbetic

If you're having issues with the doc, reach out to me and I can update it for you.

Thanks in advance.

Color: Black Sapphire Metallic
Trim: M-Sport

Appreciate you organizing all of this, was wondering if this would be open to a good buddy of mine? (non-bmw) I can PM you his info if that's something you're open to.

[N26Ghost]

Originally Posted by Divbetic

Color: Black Sapphire Metallic
Trim: M-Sport

Appreciate you organizing all of this, was wondering if this would be open to a good buddy of mine? (non-bmw) I can PM you his info if that's something you're open to.

No worries. Yep, no restrictions here, friends are always welcome.

[Czechmate]

Ghost I updated the chart with my info. Please let me know if you are able to see it from your end!

[N26Ghost]

Originally Posted by Czechmate

Ghost I updated the chart with my info. Please let me know if you are able to see it from your end!

Thanks Czechmate for doing that.

Unfortunately, I can't see that data added to the sheet.

Please provide your data here and I will update for you.

- Vehicle
-- Platform
-- Year
-- Model
-- Trim
-- Color

- Engine
-- Motor
-- Tune

- Bolt-ons
-- Chargepipe
-- Intercooler
-- Downpipe
-- TIC pipe
-- Turbo Inlet
-- DV
-- Intake
-- Exhaust
-- Oil Cooling
-- Fueling
-- Catch Can

-A

[Czechmate]

Thank you!
I had to fill a lot out as "custom" because they are built to spec for the bottom mount single kit.

- Vehicle

-- Platform: Coupe
-- Year: 2008
-- Model: 335i
-- Trim: M Sport 6 Speed
-- Color: Black Sapphire Metallic

- Engine
-- Motor: N54
-- Tune: JB4+MHD BEF & Custom

- Bolt-ons
-- Chargepipe: VRSF
-- Intercooler: Cobb 5 Stepped
-- Downpipe: Custom
-- TIC pipe: Custom
-- Turbo Inlet: Custom
-- DV: OEM
-- Intake: Custom
-- Exhaust: OEM
-- Oil Cooling: OEM
-- Fueling: PR Stage 2
-- Catch Can: OEM

Also - Motive Twin Disc Clutch & RTD Shifter

[N26Ghost]

Originally Posted by Czechmate

Thank you!
I had to fill a lot out as "custom" because they are built to spec for the bottom mount single kit.

- Vehicle

-- Platform: Coupe
-- Year: 2008
-- Model: 335i
-- Trim: M Sport 6 Speed
-- Color: Black Sapphire Metallic

- Engine
-- Motor: N54
-- Tune: JB4+MHD BEF & Custom

- Bolt-ons
-- Chargepipe: VRSF
-- Intercooler: Cobb 5 Stepped
-- Downpipe: Custom
-- TIC pipe: Custom
-- Turbo Inlet: Custom
-- DV: OEM
-- Intake: Custom
-- Exhaust: OEM
-- Oil Cooling: OEM
-- Fueling: PR Stage 2
-- Catch Can: OEM

Also - Motive Twin Disc Clutch & RTD Shifter

What a special build. You must love your car. Interested to see what she'll do. Thanks for the info, I will get it added.

[bmwchue]

add me im interested as well

[xander25]

Is there still space available? I'm extremely interested and can be there first thing in the morning.

[N26Ghost]

Yes, there is still room.

[cobra2814]

Hey N26, I can't access your spreadsheet so I'll put my info here. You know my car anyway but:

2018 BMW 440i
Enginge: B58
Tune: MPPSK
Otherwise stock
Black Sapphire color
8 speed auto
Muffler bearing and blinker fluid delete kit

[xander25]

Same cant access it.

2018 BMW M3 ZCP
Engine: S55
Tune: BootMod3
Magnaflow catback
K&N Drop in filters

-- Platform: Sedan
-- Year: 2018
-- Model: M3
-- Trim: Competition Pack
-- Color: Mineral Grey Metallic

- Engine
-- Motor: S55
-- Tune: BootMod3 Stage 1

- Bolt-ons
-- Chargepipe: OEM
-- Intercooler: OEM
-- Downpipe: OEM
-- TIC pipe: OEM
-- Turbo Inlet: OEM
-- DV: OEM
-- Intake: K&N Drop in filters
-- Exhaust: Magnaflow catback exhaust
-- Oil Cooling: OEM
-- Fueling: OEM
-- Catch Can: OEM

[kreuz]

If it's still open for signups, here's my info. Thanks for setting this up!

- Vehicle
-- Platform
F32
-- Year
2014
-- Model
435i
-- Trim
M-Sport 8AT
-- Color
Black Sapphire Metallic

- Engine
-- Motor
N55
-- Tune
BM3 Stage 1 91 Oct

- Bolt-ons
-- Chargepipe
ER
-- Intercooler
Wagner Evo 2 Competition
-- Downpipe
OEM
-- TIC pipe
OEM
-- Turbo Inlet
OEM
-- DV
OEM
-- Intake
MPPK
-- Exhaust
MPE
-- Oil Cooling
OEM
-- Fueling
OEM
-- Catch Can
OEM

[jh_f30]

Wow. Looks like we're pushing 15+ participants! N26Ghost, think it might be a good idea to break it up into groups? I'm just wondering if everyone shows up at once, it might be a long wait for some. Depending on how long each car takes, maybe splitting up the group into 4 every couple hours? (Ie. Group A starts at 10:00, Group B at 12:00, Group C at 2:00, etc.?)

[N26Ghost]

Originally Posted by jh_f30

Wow. Looks like we're pushing 15+ participants! N26Ghost, think it might be a good idea to break it up into groups? I'm just wondering if everyone shows up at once, it might be a long wait for some. Depending on how long each car takes, maybe splitting up the group into 4 every couple hours? (Ie. Group A starts at 10:00, Group B at 12:00, Group C at 2:00, etc.?)

You got it, amigo.

Let me update the roster with the new data and then I will create a schedule and we can move folks about as needed.

[rjd_F30]

What's the final date for when the dyno day is going down, so I can know when to look forward to the numbers