03-20-2012, 02:11 AM | #1 |
Private
29
Rep 51
Posts
Drives: Polestar2, Audi A4 convertible
Join Date: Feb 2012
Location: Rotterdam, Netherlands
|
Roofrack f30 compatible with e90?
Hello
Does anyone know if the roofrack (2 beams) for the new f30 are the same as the e90 brackets on the roof? And can anyone tell/measure the centre to centre distance of the front/rear roof beam? Many thanks Dutchbmw |
07-22-2013, 11:48 AM | #2 |
Brigadier General
1053
Rep 3,205
Posts |
|
Appreciate
0
|
07-22-2013, 02:44 PM | #3 |
Second Lieutenant
4
Rep 222
Posts |
I am using my e90 roof rack on my f30. It is the stock roof rack.
One rail fit with no modification, and the other rail, the one that fits in the front of the car, had to have the slots widened in the aluminum bar by 1cm to fit the wider spread of the f30. This modification took me 10 minutes. I'm glad I didn't listen to those saying it won't fit because e90 roof racks are widely available used for cheap. Based on how the e90 roof racks adjust, if the f30 racks are designed the same way they will fit the e90, but as I have never seen an f30 roof rack I can't say for sure. |
Appreciate
0
|
07-23-2013, 12:40 AM | #4 | |
✚
101
Rep 1,237
Posts |
Quote:
|
|
Appreciate
0
|
07-23-2013, 06:31 AM | #5 | |
Lieutenant Colonel
78
Rep 1,793
Posts |
Quote:
__________________
2014 F30 335 X-Drive | 6-MT | Alpine White/Coral Red | ZMM ZDH ZDA |
|
|
Appreciate
0
|
07-23-2013, 07:54 AM | #6 |
Second Lieutenant
4
Rep 222
Posts |
The feet on these bar sets are not a fixed width. They can slide an inch or so in either direction. A screw near each foot adjusts this length by binding in a channel. Since the f30 is wide, the modification (to the front bar only) is to widen the slot near each foot by 1/4 inch. You can use a round file, which would be a pita, or use a drill bit the same size as the slot.
I'll post a pic of the mod tonight. pic links: slot lengthened on left side http://imageshack.us/a/img708/1497/0fqh.jpg You can see where I lengthened the slot with a drill bit. All you need is to be able to slide that screw a little further over. The channel on the bottom is already long enough. http://imageshack.us/a/img4/2525/6tcn.jpg whole roof rack. http://imageshack.us/a/img547/3778/cll5.jpg Last edited by billiebob; 07-24-2013 at 09:07 AM.. |
Appreciate
0
|
01-22-2018, 12:46 AM | #7 | |
Private
26
Rep 66
Posts |
Quote:
FYI these are the part #s for each piece: Roof Racks: 82710403104 Bike Carriers: 82722326514 You'll need a security torx 30 bit, extra long, to attach these to our cars, or the special BMW roof rack tool (82790392011). Had to massage the entry hole to get the torx bit in, but nothing too major. |
|
Appreciate
0
|
01-22-2018, 05:26 PM | #8 |
Private First Class
46
Rep 125
Posts |
I just learned a painful lesson....I have the Thule rack with the fit kit to fir my e92 m3...,,I just purchased a CPO f32 and researched that all I need is a different fit kit and I can use my same bars.....to my chagrin, the fit kit for the f32 has pretty much the same exact parts except for the rubber boot pieces.....paid $109 a fit kit that I really did not need.....oh well.....fit kit for e92 m3 is Thule 3039 and for the f32 coupe is the 3028....only difference between these kits turns out to be the rubber boots and he difference so are very minor.....
|
Appreciate
0
|
01-27-2018, 05:57 AM | #10 |
Captain
28
Rep 743
Posts |
|
Appreciate
0
|
03-07-2018, 10:38 AM | #12 | |
PPRSWCE
654
Rep 1,848
Posts |
Quote:
|
|
Appreciate
0
|
03-08-2018, 09:40 PM | #14 |
PPRSWCE
654
Rep 1,848
Posts |
MAkes more sense now. thanks! I ended up getting the right model for the F30 used for a decent price. Or what I think is a decent price anyway lol
|
Appreciate
0
|
06-21-2020, 02:46 PM | #15 |
Major
47
Rep 1,160
Posts |
Bringing this thread back again....
I just did what others said to just lengthen he aluminum slot to make the correct adjustment. Worked perfectly. Now my slight issue is that the black plastic part where the mount connects to the car is touching the roof or extremely close to it. In fear of to rubbing the paint away. Anybody else notice this? I see they sell Roof gutter protectors pn: 82792406019 or I was going to grind /cut off some of the plastic to make more of a comfortable clearance. |
Appreciate
0
|
06-22-2020, 01:35 PM | #16 | |
Captain
28
Rep 743
Posts |
Quote:
|
|
Appreciate
0
|
09-25-2020, 06:01 PM | #17 |
Major
47
Rep 1,160
Posts |
Finally got around to the gutter/paint protectors. Not much of difference in clearance but I see there are multiple different types of gutter/paint protectors depending on vehicle. This is on an F80 with e90 racks and PN 82 79 0 392 010 protectors not even tightened down
__________________
Monaco Blue 330xi - Terra Interior/6-MT/Sport/Premium/Cold/CSL's/M3 Spoiler Lip/Black Kidney's
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|