n20 tmap

WestCoastWinter · 01-08-2016, 06:42 PM

Asking for a friend... Is there anyway to remove the stock tmap sensor if the tab broke?

DRG1983 · 01-09-2016, 12:29 AM

Slide a small flat screwdriver into the back of the connector, pry up lightly, and you can separate the connectors. It's easier to do this even if the tab isn't broken.

WestCoastWinter · 01-09-2016, 08:57 AM

Quote:

Originally Posted by DRG1983

Slide a small flat screwdriver into the back of the connector, pry up lightly, and you can separate the connectors. It's easier to do this even if the tab isn't broken.

Thank you!

taylor_green · 01-11-2016, 11:21 AM

Just curious... Were you installing a tune? I always have trouble with that connection when swapping in and out my JB1. It's in such an awkward spot and the connection is actually pretty solid when properly seated on that tab/hook.

01-08-2016, 06:42 PM	#1
WestCoastWinter New Member 0 Rep 5 Posts Drives: 320i xDrive Join Date: Jun 2014 Location: Springfield iTrader: (0)	n20 tmap Asking for a friend... Is there anyway to remove the stock tmap sensor if the tab broke?
	Appreciate 0 Tweet Quote

01-09-2016, 12:29 AM	#2
DRG1983 New Member 23 Rep 18 Posts Drives: 2018 BMW 340i Join Date: Feb 2014 Location: Fort Worth, TX iTrader: (0)	Slide a small flat screwdriver into the back of the connector, pry up lightly, and you can separate the connectors. It's easier to do this even if the tab isn't broken.
	Appreciate 0 Quote

01-11-2016, 11:21 AM	#4
taylor_green Private 10 Rep 57 Posts Drives: 2014 328i Sport Join Date: Aug 2015 Location: SC iTrader: (0)	Just curious... Were you installing a tune? I always have trouble with that connection when swapping in and out my JB1. It's in such an awkward spot and the connection is actually pretty solid when properly seated on that tab/hook.
	Appreciate 0 Quote