BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

jaco_ma · 01-31-2018, 09:09 AM

Sorry for my ignorance, but what are the differences between Premium and Pro Launchers?

shawnsheridan · 01-31-2018, 12:43 PM

Quote:

Originally Posted by jaco_ma

Sorry for my ignorance, but what are the differences between Premium and Pro Launchers?

http://tokenmaster.blogspot.com/2015...d-premium.html

Rowano · 01-31-2018, 04:37 PM

Trying to code ebt on 2017 f31 with hu_nbt2 and idrive 5, pro nav.

I've tried both coding both 6ns and 6nw, both reset idrive when writing code and I see the office option now, but I can't connect 2 phones or bt audio. No option to select 2 telephones under settings.

It looks like a few people have this issue on nbt evo - is there a solution?

Luiz Bicudo · 01-31-2018, 05:07 PM

Hello Shawn. Can you send me a link to the latest premium launcher please? Thanks!!

shawnsheridan · 01-31-2018, 05:23 PM

Quote:

Originally Posted by Luiz Bicudo

Hello Shawn. Can you send me a link to the latest premium launcher please? Thanks!!

PM sent.

williamhudson1218@gmail.c · 01-31-2018, 11:44 PM

Shawn, could you send me a link to the e-sys download

shawnsheridan · 02-01-2018, 04:34 AM

Quote:

Originally Posted by williamhudson1218@gmail.c

Shawn, could you send me a link to the e-sys download

PM sent.

method41 · 02-01-2018, 03:57 PM

Hello Guys!

i think i screwed up my navigation. The menu item navigation is greyed out.

My initial plan was to update my navi software to 2018-1 NEXT. But after many failed attemps (usb device 5 not recognized, etc) i was looking for a way to "reset" my NBT navigation. I ended up resetting my FSCs using the tool32 and "_STEUERN_DELETE_PERSISTENCY_INTEL_PLUS_SWT".

I did not read it carefully enough, to understand this should only be done if retrofitted devices are used.

BMW F30 NBT Factory.
Here is my current FSC status:

------------------------------------------------------------

--> Status von "2" Steuergerät(en) gelesen <--

EPS[DiagAddress=48(0x30)]
<VIN>
RootCertStatus not available
SWSigStatus accepted
SWTApplications
----------
AppID 131(0x83)
UpgradeIndex 1(0x01)
SWTType SWTclassic light
FSCStatus not available
FSCCertStatus not available

HU_NBT[DiagAddress=99(0x63)]
<VIN>
RootCertStatus accepted
SWSigStatus accepted
SWTApplications
----------
AppID 158(0x9E)
UpgradeIndex 1(0x01)
SWTType SWTclassic full
FSCStatus not available
FSCCertStatus accepted
----------
AppID 160(0xA0)
UpgradeIndex 1(0x01)
SWTType SWTclassic full
FSCStatus not available
FSCCertStatus accepted
----------
AppID 222(0xDE)
UpgradeIndex 1(0x01)
SWTType SWTclassic full
FSCStatus not available
FSCCertStatus accepted
----------
AppID 111(0x6F)
UpgradeIndex 1(0x01)
SWTType SWTclassic full
FSCStatus not available
FSCCertStatus accepted
----------
AppID 159(0x9F)
UpgradeIndex 1(0x01)
SWTType SWTclassic full
FSCStatus not available
FSCCertStatus accepted
----------
AppID 156(0x9C)
UpgradeIndex 1(0x01)
SWTType SWTclassic full
FSCStatus not available
FSCCertStatus accepted
----------
AppID 229(0xE5)
UpgradeIndex 1(0x01)
SWTType SWTclassic full
FSCStatus not available
FSCCertStatus accepted
----------
AppID 169(0xA9)
UpgradeIndex 45(0x2D)
SWTType SWTshort
FSCStatus rejected
FSCCertStatus not available

------------------------------------------------------------

I think i need some advice/help - how bad this is, whats needed to restore the previous state to use the navi again.

Thanks in advance
BR

shawnsheridan · 02-01-2018, 04:04 PM

Quote:

Originally Posted by method41

Hello Guys!

i think i screwed up my navigation. The menu item navigation is greyed out.

My initial plan was to update my navi software to 2018-1 NEXT. But after many failed attemps (usb device 5 not recognized, etc) i was looking for a way to "reset" my NBT navigation. I ended up resetting my FSCs using the tool32 and "_STEUERN_DELETE_PERSISTENCY_INTEL_PLUS_SWT".

I did not read it carefully enough, to understand this should only be done if retrofitted devices are used.

BMW F30 NBT Factory.
Here is my current FSC status:

I think i need some advice/help - how bad this is, whats needed to restore the previous state to use the navi again.

Thanks in advance
BR

Not too bad. You need to Import and Activate yoru original FSC Codes back into NBT.

method41 · 02-01-2018, 04:22 PM

Quote:

Originally Posted by shawnsheridan

Not too bad. You need to Import and Activate yoru original FSC Codes back into NBT.

Thanks for that fast response. Can you tell me the steps i need to do ? Or is there a guide ? I am not very familiar with e-sys and fsc code handling.

Thanks

shawnsheridan · 02-01-2018, 04:53 PM

Quote:

Originally Posted by method41

Thanks for that fast response. Can you tell me the steps i need to do ? Or is there a guide ? I am not very familiar with e-sys and fsc code handling.

Thanks

PM sent.

vfx19 · 02-03-2018, 02:20 PM

Hi Shawn,
Can I please have a link to the latest INPA. Also if you can help me resolve issue on injecting new CAF on FZD. I tried injecting FZD by highlighting FZD but Detect CAF for SWE but it is grayed out. I'm using latest 3.63 also my current i-step I 17-11-503. Thank you in advance.

shawnsheridan · 02-03-2018, 02:24 PM

Quote:

Originally Posted by vfx19

Hi Shawn,
Can I please have a link to the latest INPA. Also if you can help me resolve issue on injecting new CAF on FZD. I tried injecting FZD by highlighting FZD but Detect CAF for SWE but it is grayed out. I'm using latest 3.63 also my current i-step I 17-11-503. Thank you in advance.

PM sent.

For Detect CAF for SWE, use E-Sys 3.27.1, not newer.

iAlexander · 02-05-2018, 01:30 PM

I'm stuck in a loop with the E-Sys launcher telling me to make a new token because my current one expired 12/31/2017 so I haven't been able to code since December 31st. I read something about the developer no longer supporting the Premium version, but Shawn aren't you sending out links to the Premium version? Would that mean you're sending out links to something that doesn't work anymore?

I'm super confused and would appreciate any guidance on how to code my car again. I set my headlights to extra sensitive last year but now they're always on even in broad daylight and it's driving me crazy. Definitely want to update that but I can't get E-Sys to work like it used to.

Is the PRO version the only available version now? How do I run that instead of Premium? Do I have to pay or something?

shawnsheridan · 02-05-2018, 01:35 PM

Quote:

Originally Posted by iAlexander

I'm stuck in a loop with the E-Sys launcher telling me to make a new token because my current one expired 12/31/2017 so I haven't been able to code since December 31st. I read something about the developer no longer supporting the Premium version, but Shawn aren't you sending out links to the Premium version? Would that mean you're sending out links to something that doesn't work anymore?

I'm super confused and would appreciate any guidance on how to code my car again. I set my headlights to extra sensitive last year but now they're always on even in broad daylight and it's driving me crazy. Definitely want to update that but I can't get E-Sys to work like it used to.

Is the PRO version the only available version now? How do I run that instead of Premium? Do I have to pay or something?

Launcher PREMIUM 2.8 was released, and it is good until end of Jun 2018.

iAlexander · 02-05-2018, 01:51 PM

Quote:

Originally Posted by shawnsheridan

Launcher PREMIUM 2.8 was released, and it is good until end of Jun 2018.

Awesome thank you!

Where do you get Premium 2.8, though?

shawnsheridan · 02-05-2018, 02:01 PM

Quote:

Originally Posted by iAlexander

Awesome thank you!

Where do you get Premium 2.8, though?

PM sent.

iAlexander · 02-05-2018, 02:03 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thaaaaaank you!

MichaelNRW · 02-06-2018, 04:09 PM

Hi there,

i just tried to change the "alarm type" in FZD to us.
But my car doesn´t have the option us.
There´s just ece (standard), gb and initwert.

I just got the car two weeks ago.
It was build in november 2017.
It´s an F30 320d Efficient Dynamics Edition.

Any ideas?

Thanks
Michael

Almaretto · 02-06-2018, 08:46 PM

Quote:

Originally Posted by MichaelNRW

Hi there,

i just tried to change the "alarm type" in FZD to us.
But my car doesn´t have the option us.
There´s just ece (standard), gb and initwert.

I just got the car two weeks ago.
It was build in november 2017.
It´s an F30 320d Efficient Dynamics Edition.

Any ideas?

Thanks
Michael

Coding cannot overcome lack of hardware.

Tony_ca1 · 02-07-2018, 07:56 AM

Hi Shawn , can you send me a link to the latest Psdzdata ?

Thank you.
Shawn is it possible that after the dealer update the software of my F10 from F10-15-11-503 to F10-17-11-520 some codings dont work anymore ( like Route preview ,Route magnet - regen schliessen and so one )

MichaelNRW · 02-07-2018, 10:13 AM

Quote:

Originally Posted by Almaretto

Coding cannot overcome lack of hardware.

What should be missing?
I got the S302 :-)

01-31-2018, 09:09 AM	#12937
jaco_ma Private First Class 28 Rep 140 Posts Drives: G20 320d Join Date: Feb 2012 Location: España iTrader: (0)	Sorry for my ignorance, but what are the differences between Premium and Pro Launchers?
	Appreciate 0 Quote

01-31-2018, 04:37 PM	#12939
Rowano Registered 2 Rep 4 Posts Drives: BMW 320 Join Date: Jan 2018 Location: Edinburgh iTrader: (0)	Trying to code ebt on 2017 f31 with hu_nbt2 and idrive 5, pro nav. I've tried both coding both 6ns and 6nw, both reset idrive when writing code and I see the office option now, but I can't connect 2 phones or bt audio. No option to select 2 telephones under settings. It looks like a few people have this issue on nbt evo - is there a solution?
	Appreciate 0 Quote

01-31-2018, 05:07 PM	#12940
Luiz Bicudo New Member 0 Rep 5 Posts Drives: 2017 BMW 320i Join Date: Jul 2017 Location: Brazil iTrader: (0)	Hello Shawn. Can you send me a link to the latest premium launcher please? Thanks!!
	Appreciate 0 Quote

01-31-2018, 11:44 PM	#12942
williamhudson1218@gmail.c willhudson 0 Rep 1 Posts Drives: 2013 328i xDrive Join Date: Jan 2018 Location: Utah iTrader: (0)	E-sys download Shawn, could you send me a link to the e-sys download
	Appreciate 0 Quote

02-01-2018, 03:57 PM	#12944
method41 Registered 2 Rep 3 Posts Drives: BMW 320d 2013 Join Date: Feb 2018 Location: Austria iTrader: (0)	Hello Guys! i think i screwed up my navigation. The menu item navigation is greyed out. My initial plan was to update my navi software to 2018-1 NEXT. But after many failed attemps (usb device 5 not recognized, etc) i was looking for a way to "reset" my NBT navigation. I ended up resetting my FSCs using the tool32 and "_STEUERN_DELETE_PERSISTENCY_INTEL_PLUS_SWT". I did not read it carefully enough, to understand this should only be done if retrofitted devices are used. BMW F30 NBT Factory. Here is my current FSC status: ------------------------------------------------------------ --> Status von "2" Steuergerät(en) gelesen <-- EPS[DiagAddress=48(0x30)] <VIN> RootCertStatus not available SWSigStatus accepted SWTApplications ---------- AppID 131(0x83) UpgradeIndex 1(0x01) SWTType SWTclassic light FSCStatus not available FSCCertStatus not available HU_NBT[DiagAddress=99(0x63)] <VIN> RootCertStatus accepted SWSigStatus accepted SWTApplications ---------- AppID 158(0x9E) UpgradeIndex 1(0x01) SWTType SWTclassic full FSCStatus not available FSCCertStatus accepted ---------- AppID 160(0xA0) UpgradeIndex 1(0x01) SWTType SWTclassic full FSCStatus not available FSCCertStatus accepted ---------- AppID 222(0xDE) UpgradeIndex 1(0x01) SWTType SWTclassic full FSCStatus not available FSCCertStatus accepted ---------- AppID 111(0x6F) UpgradeIndex 1(0x01) SWTType SWTclassic full FSCStatus not available FSCCertStatus accepted ---------- AppID 159(0x9F) UpgradeIndex 1(0x01) SWTType SWTclassic full FSCStatus not available FSCCertStatus accepted ---------- AppID 156(0x9C) UpgradeIndex 1(0x01) SWTType SWTclassic full FSCStatus not available FSCCertStatus accepted ---------- AppID 229(0xE5) UpgradeIndex 1(0x01) SWTType SWTclassic full FSCStatus not available FSCCertStatus accepted ---------- AppID 169(0xA9) UpgradeIndex 45(0x2D) SWTType SWTshort FSCStatus rejected FSCCertStatus not available ------------------------------------------------------------ I think i need some advice/help - how bad this is, whats needed to restore the previous state to use the navi again. Thanks in advance BR
	Appreciate 0 Quote

02-03-2018, 02:20 PM	#12948
vfx19 New Member 0 Rep 15 Posts Drives: 2015 BMW 320i Join Date: Nov 2017 Location: San Diego iTrader: (0)	Hi Shawn, Can I please have a link to the latest INPA. Also if you can help me resolve issue on injecting new CAF on FZD. I tried injecting FZD by highlighting FZD but Detect CAF for SWE but it is grayed out. I'm using latest 3.63 also my current i-step I 17-11-503. Thank you in advance.
	Appreciate 0 Quote

02-05-2018, 01:30 PM	#12950
iAlexander Private 9 Rep 60 Posts Drives: F30 320i, W211 E350 Join Date: Nov 2017 Location: Atlanta, GA iTrader: (0)	I'm stuck in a loop with the E-Sys launcher telling me to make a new token because my current one expired 12/31/2017 so I haven't been able to code since December 31st. I read something about the developer no longer supporting the Premium version, but Shawn aren't you sending out links to the Premium version? Would that mean you're sending out links to something that doesn't work anymore? I'm super confused and would appreciate any guidance on how to code my car again. I set my headlights to extra sensitive last year but now they're always on even in broad daylight and it's driving me crazy. Definitely want to update that but I can't get E-Sys to work like it used to. Is the PRO version the only available version now? How do I run that instead of Premium? Do I have to pay or something?
	Appreciate 0 Quote

02-06-2018, 04:09 PM	#12955
MichaelNRW B58 Power 492 Rep 628 Posts Drives: 05/2022 M340i xDrive Touring Join Date: Feb 2018 Location: Germany iTrader: (0) Garage List 2022 M340i xDrive T ... [0.00]	Hi there, i just tried to change the "alarm type" in FZD to us. But my car doesn´t have the option us. There´s just ece (standard), gb and initwert. I just got the car two weeks ago. It was build in november 2017. It´s an F30 320d Efficient Dynamics Edition. Any ideas? Thanks Michael
	Appreciate 0 Quote

02-07-2018, 07:56 AM	#12957
Tony_ca1 Enlisted Member 0 Rep 32 Posts Drives: BMW F10 LCI Join Date: Jun 2013 Location: Belgium iTrader: (0)	Hi Shawn , can you send me a link to the latest Psdzdata ? Thank you. Shawn is it possible that after the dealer update the software of my F10 from F10-15-11-503 to F10-17-11-520 some codings dont work anymore ( like Route preview ,Route magnet - regen schliessen and so one )
	Appreciate 0 Quote