[Raytec85]

Originally Posted by DanITman

Confirmed that F34 Active Spoiler retraction speed can be coded.

HU_NBT -> 3100 -> V_ASP_IN

Again this value needs to be converted to hex to work. The default is 46 hex which converts to 70 kmph. If you want it to be 88 kmph that would convert to a hex value of 58.

Do you need to code the V_ASP_OUT & INV_V_ASP_OUT as well ? Can you give me some example, I am eager to learn it, and I wish my active spoiler can up when it is10km/h, then retract is at 2km/h.


Please help and thanks in advance .

[Halsifer]

Originally Posted by Raytec85

Do you need to code the V_ASP_OUT & INV_V_ASP_OUT as well ? Can you give me some example, I am eager to learn it, and I wish my active spoiler can up when it is10km/h, then retract is at 2km/h.


Please help and thanks in advance .

You can only have one speed where it activates and retracts.

If you want 10 km/h then:
V_ASP_OUT set werte = 00, 0A
INV_V_ASP_OUT set werte = FF, F5

[Raytec85]

Originally Posted by Halsifer

You can only have one speed where it activates and retracts.

If you want 10 km/h then:
V_ASP_OUT set werte = 00, 0A
INV_V_ASP_OUT set werte = FF, F5

Have you try it set at 10 km/h ?? Or lower than 60km/h ?
I try to set lower than that doesn't work for me though ??

Thanks

[Halsifer]

Originally Posted by Raytec85

Have you try it set at 10 km/h ?? Or lower than 60km/h ?
I try to set lower than that doesn't work for me though ??

Thanks

Nope, because I don't have a 3-Series GT, nor have I ever seen one or coded one in person unfortunately. Sorry, my friend.

[Jason954x]

Originally Posted by Halsifer

LATEST UPDATE:
Updated to v1.7 (07/01/2015 1:30AM CST): (Download attached below, or click here)

• Added FA Code: Sport Auto Transmission - Enable SAT for quicker and smoother shifts.
• Added Code: ‘ICMKOD_B_SPORTINDIVIDUALISIERBAR’ - Allows Macro_fds to function. Sport Mode Configuration.
• Added Code: ‘KOMFORT_OEFFNEN’ - Delay before activating Comfort Opening
• Added Code: ‘C_ZSW_Aktivierunggeschwindigkeit_Funktion_low’ - Change Active Blind Spot Activation Speed.
• Added Code: ‘NAVI_ROAD_PREVIEW’ - Enables ‘Route Info’ (Turn-By-Turn Directions)
• Added Code: ‘EINAUSSTIEGSHILFE’ - Activates Easy Entry when entering the vehicle.
• Added Code: ‘MEMORY_GONG’ - Enables chime when seat position successfully stored in memory
• Added Codes: Active Sound Design Modification (Change to M3/M5/Disabled)
• Added Codes/Section: Active Spoiler (F34 3-Series GT only)
• Added Test Codes: ‘REGEN_SCHLIESSEN’ - Close Sunroof on Rain Detection
• Changed Code: ‘NAVI_FLIGHT’ -> ‘ROUTE_FLIGHT’ (Updated Name)
• Changed Description: Enhanced Bluetooth (Added difference between 6NK & 6NS)
• Changed Description: ‘Macro_fds’ (Now working with all Head Units)
• Changed Description: ‘TFL_Modus’ (Gave difference between Tfl_s and Drl_s)
• Fixed Code: ‘SL021_IBA_3’ -> ‘SL21_IBA_3’
• Fixed Code: ‘MAPPING_TAGAHRL_H2_L_OUTPUT’ -> ‘MAPPING_TAGFAHRL_H2_L_OUTPUT’
• Fixed Code: ‘MAPPING_TAGAHRL_H2_R_OUTPUT’ -> ‘MAPPING_TAGFAHRL_H2_R_OUTPUT’
• Fixed Description: SeatBeltReminder_SBR_Beifahrer & SeatBeltReminder_SBR_Fahrer (Was Reversed)
• Moved Code: ‘TFL_MODUS’ to Day-Running Lights & Activate Rear Fog Lamps
• Moved Code: ‘Daydriving_light’ to Day-Running Lights & Activate Rear Fog Lamps
• Removed Code: ‘ASD_SOUND_OFF’ - Varied Results. Replaced with Active Sound Design Section.
• Removed Code: ‘KOMFORTSCHLIESSUNG_PA’ - Unnecessary. Active in all CA cars by default.
• Removed Code: ‘RLS_FLC_SCHWELLWERT_SATZ’ - Not found in F30, only F10.
• Removed Code: ‘MAPPING_UNIVERSAL_6_OUTPUT’ - Unused.
• Removed Code: ‘MAPPING_UNIVERSAL_7_OUTPUT’ - Unused.
• Removed Code: ‘Sportschalter’ - Replaced with Sport Auto Transmission FA/VO Coding
• Removed Code: ‘Sportschalter_alt’ - Replaced with Sport Auto Transmission FA/VO Coding
• Verified Code: ‘KOMFORT_OEFF_HINTEN’ -> Moved to 'General Locking/Window Features & Convenience Features'
• Verified Code: ‘KOMFORT_OEFF_SHD’ -> Moved to 'General Locking/Window Features & Convenience Features'
• Verified Code: ‘KOMFORT_SCHL_VORNE’ -> Moved to 'General Locking/Window Features & Convenience Features'
• Verified Code: ‘KOMFORT_SCHL_SHD’ -> Moved to 'General Locking/Window Features & Convenience Features'

*Any codes added or changed will have the function and description bolded in the cheat sheet.
**If you decide to test codes in the 'TO BE TESTED' section, please let me know your results!

Previous Versions:
v1.6 (12/23/2014 11:45AM PST):

• Added Code: 'CLM_TIMEOUT_HK_SMO' - Change the Comfort Access trunk opening delay time.
• Added Code: 'CLM_SMO_INDICATOR' - Turn off taillight flashing when opening trunk via Comfort Access.
• Added Codes: Enable LIM Function. (It will change Cruise Control's 'SET' button on the steering wheel to act as the 'LIM' button)
• Added Codes: Show Active Cruise Control iBrake Distance in HUD.
• Verified Code: ENT_MC_VIDEO_SUPPORT -> Moved to 'Video In Motion & Playback Features' (Does not save videos to internal HD)

v1.5 (10/18/2014 5:00PM PST):

• Added Section: 'Seat Heating Temperature Levels'
• Added Code: (REM) 'FH_TUERAUF_STOP_MAUT' - Allows the rear windows to be rolled up while the door is opened.
• Added Code: 'NSW_EIN_AUF_LDS_STL' - Allows Fog Lights to turn on while only parking lights are on.
• Changed Code: 'OFF_MEMORY' -> 'MEMORY_OFF'
• Changed Code: 'LCMKOD_B_SPORTLENKUNG' -> 'ICMKOD_B_SPORTLENKUNG'
• Fixed: 'C_CLC_ENA' - Value and Default Value.
• Fixed: 'JUNCTION_VIEW_HUD' - Now working. (Sometimes images/writing are messed up though.)
• Fixed: Description in 'FRA_H_R_IS_LED/FRA_H_L_IS_LED' - May cause check engine light.
• Fixed: Description in 'Variable Light Distribution' - No need to code FLA/KAFAS2.
• Fixed: Description in 'General Locking/Window Features & Convenience Features' section. (Explained how some cars with MEMORY_OFF enabled may always have the A/C defaulted to Off at each startup.)

v1.4 (9/03/2014 1:45PM PST):

• Added Section: 'INEFFECTIVE OR UNAVAILABLE CODES'
• Added Code: 'VOL_MAX_ON' - Retain volume setting up to 100% at vehicle startup
• Added Code: 'MEMORY_UMLUFT' - Remember Air Re-Circulation Setting from previous shutdown.
• Changed Description: BMW Logo - '(Not working on updated cars.)'
• Fixed: Launch Control code - Added both Function Names to Code
• Fixed: Description in 'General Locking/Window Features & Convenience Features' section. (Explained how ASP_MAX_GESCHWINDIGKEIT_BEIKLAPPEN and ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN are dependent on each other.
• Moved to Testing Codes: NAVI_AUTOZOOM - Users appear to find this unable to be selected.
• Moved to Testing Codes: HINTERGRUND_FARBE_NACHT & HINTERGRUND_FARBE_TAG - Users unable to find these codes.
• Moved to Unavailable Codes: FLA_AUTO_AKTIV
• Moved to Unavailable Codes: HUD_TLC_ENABLE
• Moved to Ineffective Codes: HVAC_POPUP codes
• Moved to Ineffective Codes: ASD_CONFIGURATION
• Moved to Ineffective Codes: BC_MOTORTEMP_ENABLE
• Verified Code: ROAD_EDGE_WARNING_ENABLED -> Moved to 'Safety Features & Precautions'

v1.3 (8/17/2014 2:45PM PST):

• Added Code: Another line of code for Auto Headlamp Sensitivity
• Added Code: Disable Active Sound Design
• Added Code: Changes Navigation Voice from English to British English
• Added Code: Remove Speed Require to Watch videos on HU_NBT
• Added Code: Removes speed requirement to read service messages on HU_NBT
• Added Code: Removes speed requirement to read office messages on HU_NBT
• Added Test Codes: Active Sound Design Configuration Menu
• Added Test Codes: Active Sound Design Configuration Menu
• Added Test Codes: Enable Speech Input for E-Mail reply or SMS reply
• Added Test Codes: Enable Time-Stamp Display for Call Logs

v1.2 (8/17/2014 1:20PM PST):

• Added Section: 'Heads-Up Display'
• Added Section: 'TO BE TESTED'
• Added Code: Threshold Speed for Activating Emergency Brake Light
• Added Code: Reverse Gear Gong Chime Code
• Added Code: Maximum speed the mirrors are allowed to fold
• Added Code: Time before it auto-locks the car when no doors have been opened
• Added Code: Number of turn signal flashes when unlocking/locking.
• Added Code: Ringtone Type (All BMW ringtones)
• Added 4 more codes for Headlamp washers
• Separated Active High Beam Assistant and Variable Light Distribution in FA Codes
• Added Test Codes: Delays between opening/closing Front, Rear, and Sunroof Windows during Comfort Opening/Closing
• Added Test Codes: Auto High Beam Automatically On as Default (Pretty sure it won't work on F30.)
• Added Test Codes: Toggle PDC between vertical and horizontal
• Added Test Codes: Codes to show Climate Control on iDrive Display
• Added Test Codes: Make Lane Departure recognize grass/curbs and light up lanes only when detected.
• Added Test Codes: Change Steering Wheel Vibration Intensity
• Added Test Codes: Show Engine Temperature
• Added Test Codes: Show Lane Change and ACC Distance in Heads Up Display

v1.1 (8/6/2014 8:00PM PST):

• Removed a duplicated Lighting Section.
• Added LED Turn Signal Coding
• Fixed Table of Contents and Links

Original Post:
So a while ago, I decided to make my own cheat sheet. I have kept it to myself for a while but then I shared it with a few people on the BMW forums and got really good feedback and suggestions to share it with everyone.

This is basically a compilation of all the codes I could find on forums, external sites, PMs, and other cheat sheet. I wanted to make it because I was sick of how tiny the writing was on spreadsheets and how lose and all over the place codes were. So I made it how I thought it would look the best! (In my opinion of course.) I revised it to make it coherent with everyone. So download it below

If people here end up liking it, I can continue updating it and posting it to the forums with a change log. I want to continue to add codes or missing information, so feel free to notify me if I'm missing anything.

Anyways, check it out and lemme know what you guys think!

Here's a screenshot of the Table of Contents for reference... They are clickable links in the PDF.

Anyone would like to assist me with remote coding?

[435iDriver]

ufffff

[marcospoffo]

125i my friend, When blinking arrow. The LED Angel gets weaker.. Same happens in the Audi for example. Code for this? Thanks!

[mkcpu]

Quick question.

What is the easiest way to code everything back to default, kind of a factory restore.
Thank you

[shawnsheridan]

Originally Posted by mkcpu

Quick question.

What is the easiest way to code everything back to default, kind of a factory restore.
Thank you

VO Code the ECU (Right-Click on ECU => Code).

[mngobara]

There are a lot of posts about coding and i think this f30 community is awesome. Have been a great amount of help thus far ..

My questions is as follows, in all higher end cars and newer cars, the headlights and welcome lights stay on for a certain amount of time after the car is locked so that it is nice and bright when you walk away

I have read that if you turn of the car completely (press start button twice) then open the door and flash your head beams, this feature will be activated and the lights will stay on for the amount of time specified in your iDrive.

IS THERE ANY WAY I CAN CODE THIS TO BE AUTOMATICALLY DONE?? I feel like it makes no sense to take an extra 2-3 steps when u leave the car to activate this option.

Again to clarify, i would like the lights outside the car to stay on for a specific amount of time after i lock the car without any additional steps. My dads basic Camry has this option for gods sake !!! lol

[mkcpu]

Originally Posted by shawnsheridan

VO Code the ECU (Right-Click on ECU => Code).

awesome. thank you

[CarlosC]

Anyone know if this works on CIC or what the equivalent setting is?

HU_NBT 3003 PIM_Driving_Text Whole_text up_to_three_lines

(Displays an entire text (SMS) message on iDrive rather than three lines)

[raqautle]

do we need to have the enet cable or is usb fine as well?

[Frogman]

Originally Posted by CarlosC

Anyone know if this works on CIC or what the equivalent setting is?

HU_NBT 3003 PIM_Driving_Text Whole_text up_to_three_lines

(Displays an entire text (SMS) message on iDrive rather than three lines)

Yes, it works on CIC. The variable name is PIM_DRIVING_TEXT_LENGTH.

[Frogman]

Originally Posted by raqautle

do we need to have the enet cable or is usb fine as well?

F-Series cars are coded via an ENET cable.

I don't think USB will work, but I've never tried it.

[ad78]

no luck for rain sensing on my 3GT.
how amazing my previous car R32 2008 can do this!

[smilo]

Originally Posted by raqautle

do we need to have the enet cable or is usb fine as well?

D-Can cable doesn't work.. You can use adapter RJ45 to USB with E-net cable
Worked for me on MacBook Air (no rj45 port)

[Halsifer]

Originally Posted by ad78

no luck for rain sensing on my 3GT.
how amazing my previous car R32 2008 can do this!

F30's are equipped with rain sensors so it's definitely capable, but there is no Auto-On feature for rain sensing likely due to false readings. I had an Audi and if I kept it on rain sensing all the time, which I did, every once in a while it would wipe for no reason. Didn't really bother me, but it's all just manufacturer preference really.

[ad78]

I cannot find or I don't know if this possible. I recently change the fog lights from halogen to led. just to matched the angel eyes color temp.

but my cluster throwing foglamp error. I know the voltage are lower than halogen. is there a code that o can clear them?

[Makky]

Halsifer, keep up the great work
Haven't seen anyone suggesting the below, sorry if I missed it.

Enable "Lane Departure Warning"
Requirement: Speed Limit Information
Lane Change Warning
NBT (Not 100% sure)
Extended cluster (Not 100% sure)

ICM - 3000 - C_KOV_TLC_verbaut - Default:"nicht verbaut" New:"verbaut"

FEM_BODY - 3003 - ComAdapterPdu_327_ Status_Spurverlassenswarnsystem - Default:"nicht_aktiv" New"aktiv"
FEM_BODY - 3420 - SPURVERLASSENS_WARNUNG - Default:"nicht_aktiv" New:"Aktiv"

KAFAS - 3020 - SEND_MSG_18A - Default:"message_off" New:"message_on_F020_F030_F025"
KAFAS - 3020 - SEND_MSG_327 - Default:"message_off" New:"message_on_F020_F030_F025"
KAFAS - 3020 - TLC_ON_OFF - Default:"TLC_off" New:"TLC_on_F020_F030_F025"
KAFAS - 3020 - TLC_START_VERSION - Default:"PIA_mode" New:"default_on"
KAFAS - 3020 - DISPLAY_VARIANT - Default:"lanes_if_system_is_on,_arrows_side_depend ant_on_ availability"
KAFAS - 3040 - ACTUATOR_ON_OFF - Default:"all_others" New:"vib_warn_on_F20_F30_F25"

KOMBI - 3003 - TLC_VERBAUT - Default:"nicht_aktiv" New:"aktiv"

HU_NBT - 3001 - LANE_DEPARTURE_WARNING - Default:"nicht_aktiv" New:"aktiv"

All credits to myfxp

[963mw]

ISP_HECKSCHEIBE - FEM_Body

This is to change interior mirror auto dimming sensitivity, very useful to change if installing tints.

[BeatB]

Hello!

I have a problem with enabling video in motion.
In "Speedlock_X_KMH_MAX; Speedlock_X_KMH_MIN" I dont have the value "FF" which is described in the cheat sheet. I can only select nicht_aktiv, 3 km/h or 8km/h for MIN and 8 km/h or 10 kmh for MAX.

All other settings like handbrake are already set to nicht_aktiv!

Anyone knows what do to?