F30 335i BMS intake & JB4 ISO dyno

mikew2069 · 02-14-2014, 05:23 PM

Quote:

Originally Posted by The Nerd

You mean tune? Yes, the tune is upgraded....but not sure about any change to any tubing.

No I meant tube/piping to the intake filter. Does the ppk have just a new air box or is the tube/pipe also different?

frenchfries · 02-14-2014, 05:31 PM

just pulled the trigger...

Any sound clips?

2blu · 02-14-2014, 05:39 PM

Quote:

Originally Posted by frenchfries

just pulled the trigger...

Any sound clips?

Yup on their Instagram account. Sounds fantastic.

The Nerd · 02-14-2014, 05:58 PM

Quote:

Originally Posted by mikew2069

Quote:

Originally Posted by The Nerd

You mean tune? Yes, the tune is upgraded....but not sure about any change to any tubing.

No I meant tube/piping to the intake filter. Does the ppk have just a new air box or is the tube/pipe also different?

No change to any tubing or piping...

mikew2069 · 02-14-2014, 06:08 PM

Quote:

Originally Posted by The Nerd

No change to any tubing or piping...

Then I would imagine that is will work for you fine.

Sp82 · 02-15-2014, 08:53 PM

Hope this sounds good together with MPE... Will wait and se

Bowser330 · 02-16-2014, 10:55 AM

Installed intake last night in about 10 minutes going slowly. This is a super easy installation, only both types of screwdrivers needed and t20 torx bit.

The sound is a big change, before turbo blowoff/bypass valve could be slightly heard now it's a loud, throatier more technical sound coming from under the hood.

I only have jb4 no other mods, went out for test drive on a cool night and butt dyno tells me I gained something but not really sure. It "feels" faster and that's all that matters for an easy mod like this.

mikew2069 · 02-16-2014, 12:53 PM

Quote:

Originally Posted by Bowser330

Installed intake last night in about 10 minutes going slowly. This is a super easy installation, only both types of screwdrivers needed and t20 torx bit.

The sound is a big change, before turbo blowoff/bypass valve could be slightly heard now it's a loud, throatier more technical sound coming from under the hood.

I only have jb4 no other mods, went out for test drive on a cool night and butt dyno tells me I gained something but not really sure. It "feels" faster and that's all that matters for an easy mod like this.

Give us a video with some revs with your hood shut! And any other vids you'd like to take

whiteninja · 02-16-2014, 01:30 PM

Vids!!!!

cailas · 02-16-2014, 04:11 PM

From what rpms you can hear blow off sound on comfort mode?

2blu · 02-16-2014, 04:21 PM

http://instagram.com/p/kXRrLrst-B/

mikew2069 · 02-16-2014, 04:47 PM

Quote:

Originally Posted by 2blu

http://instagram.com/p/kXRrLrst-B/

I've heard that clip several times... I'm looking to hear some others for comparison. I'd also like to know if the BOV sound is subtle or obnoxious. But I should have mine tomorrow so I guess I'll make my own opinion.

Bowser330 · 02-16-2014, 07:02 PM

Sorry couldn't get out today to take any vids maybe tonight...

2blu · 02-16-2014, 07:51 PM

Quote:

Originally Posted by mikew2069

I've heard that clip several times... I'm looking to hear some others for comparison. I'd also like to know if the BOV sound is subtle or obnoxious. But I should have mine tomorrow so I guess I'll make my own opinion.

if you do get it tomorrow, get some vids up !! im expecting mine by the end of the week !

mikew2069 · 02-16-2014, 08:05 PM

Quote:

Originally Posted by 2blu

if you do get it tomorrow, get some vids up !! im expecting mine by the end of the week !

For sure!

GhazaliGTE · 02-17-2014, 07:14 AM

Quote:

Originally Posted by 2blu

http://instagram.com/p/kXRrLrst-B/

That sounds SO good!!! Can't wait to hear it on my own car!

frenchfries · 02-18-2014, 03:25 PM

just got mine today. gonna install it over the weekend. sound clips coming soon!

2blu · 02-18-2014, 03:35 PM

Mine should be arriving in a day or two. I'll try and compare IATs if I get the chance !

tdizzle · 02-18-2014, 04:29 PM

Quote:

Originally Posted by Bowser330

Installed intake last night in about 10 minutes going slowly. This is a super easy installation, only both types of screwdrivers needed and t20 torx bit.

The sound is a big change, before turbo blowoff/bypass valve could be slightly heard now it's a loud, throatier more technical sound coming from under the hood.

I only have jb4 no other mods, went out for test drive on a cool night and butt dyno tells me I gained something but not really sure. It "feels" faster and that's all that matters for an easy mod like this.

Nice, should get mine Thursday. Haven't checked on installation instructions but hoping it's pretty easy. I'm presuming it's easier than installation of the JB4 Stage 2 (which I'm almost a pro at after installing and uninstalling it for dealer visits)

mikew2069 · 02-18-2014, 05:21 PM

Quote:

Originally Posted by 2blu

Mine should be arriving in a day or two. I'll try and compare IATs if I get the chance !

I wish I would have remembered to do that! ugh...

Quote:

Originally Posted by tdizzle

Nice, should get mine Thursday. Haven't checked on installation instructions but hoping it's pretty easy. I'm presuming it's easier than installation of the JB4 Stage 2 (which I'm almost a pro at after installing and uninstalling it for dealer visits)

It's an easy install but with that being said, its actually more involved than I thought it would be. Some really nice engineering by BMS with the bracket, etc. A novice can install it in 15 minutes with the proper tools.

I was going to post a video clip but there's really not much to hear. It's nice and subtle and not obnoxious at all. Just some mild turbo spool during acceleration and some mild whoosh from the DV/BOV when you release the gas. It's a keeper!

J-boogey · 02-18-2014, 05:25 PM

Mine should be here thursday.. I Can't wait to install something with out paying a mechanic haha.

frenchfries · 02-18-2014, 11:46 PM

Quote:

Originally Posted by mikew2069

I wish I would have remembered to do that! ugh...

It's an easy install but with that being said, its actually more involved than I thought it would be. Some really nice engineering by BMS with the bracket, etc. A novice can install it in 15 minutes with the proper tools.

I was going to post a video clip but there's really not much to hear. It's nice and subtle and not obnoxious at all. Just some mild turbo spool during acceleration and some mild whoosh from the DV/BOV when you release the gas. It's a keeper!

upload a video now! go to your garage and just rev it.
Just got mine. going to install it this weekend!

02-14-2014, 05:31 PM	#68
frenchfries Second Lieutenant 40 Rep 243 Posts Drives: F30 335i Join Date: Apr 2013 Location: Mars iTrader: (0)	just pulled the trigger... Any sound clips?
	Appreciate 0 Quote

02-15-2014, 08:53 PM	#72
Sp82 Colonel 166 Rep 2,000 Posts Drives: F15 X5/G30 5er Join Date: Feb 2006 Location: DFW, Tx iTrader: (1)	Hope this sounds good together with MPE... Will wait and se
	Appreciate 0 Quote

02-16-2014, 10:55 AM	#73
Bowser330 Lieutenant Colonel 289 Rep 1,575 Posts Drives: i3 REX Join Date: Jan 2011 Location: Socal iTrader: (0)	Installed intake last night in about 10 minutes going slowly. This is a super easy installation, only both types of screwdrivers needed and t20 torx bit. The sound is a big change, before turbo blowoff/bypass valve could be slightly heard now it's a loud, throatier more technical sound coming from under the hood. I only have jb4 no other mods, went out for test drive on a cool night and butt dyno tells me I gained something but not really sure. It "feels" faster and that's all that matters for an easy mod like this.
	Appreciate 0 Quote

02-16-2014, 01:30 PM	#75
whiteninja Private First Class 8 Rep 133 Posts Drives: 2014 435i Msport AW Join Date: May 2011 Location: Hallandale, FL iTrader: (1)	Vids!!!!
	Appreciate 0 Quote

02-16-2014, 04:11 PM	#76
cailas Private First Class 31 Rep 114 Posts Drives: BMW M5 F90 2018 Join Date: Oct 2013 Location: Lithuania iTrader: (0)	From what rpms you can hear blow off sound on comfort mode?
	Appreciate 0 Quote

02-16-2014, 04:21 PM	#77
2blu Captain 197 Rep 923 Posts Drives: 540i XDrive ///M Sport Join Date: Oct 2013 Location: Montreal iTrader: (1)	http://instagram.com/p/kXRrLrst-B/ __________________ GONE: '13 335i X-drive ///M-Sport \| GONE: '16 340i X-Drive ///M-Sport \| GONE: '18 540iX-Drive ///M-Sport \| NOW: '20 X3///M
	Appreciate 0 Quote

02-16-2014, 07:02 PM	#79
Bowser330 Lieutenant Colonel 289 Rep 1,575 Posts Drives: i3 REX Join Date: Jan 2011 Location: Socal iTrader: (0)	Sorry couldn't get out today to take any vids maybe tonight...
	Appreciate 0 Quote

02-18-2014, 03:25 PM	#83
frenchfries Second Lieutenant 40 Rep 243 Posts Drives: F30 335i Join Date: Apr 2013 Location: Mars iTrader: (0)	just got mine today. gonna install it over the weekend. sound clips coming soon!
	Appreciate 0 Quote

02-18-2014, 03:35 PM	#84
2blu Captain 197 Rep 923 Posts Drives: 540i XDrive ///M Sport Join Date: Oct 2013 Location: Montreal iTrader: (1)	Mine should be arriving in a day or two. I'll try and compare IATs if I get the chance !
	Appreciate 0 Quote

02-18-2014, 05:25 PM	#87
J-boogey Major 70 Rep 1,339 Posts Drives: F30 335xi Msport Join Date: Sep 2009 Location: Oceanside, New York iTrader: (3)	Mine should be here thursday.. I Can't wait to install something with out paying a mechanic haha. __________________ 2013 F30 335i xdrive \| Estoril Blue \| Black Dakota Leather \| Aluminum Hexagon trim \| M-Sport \| Cold weather \| DHP \| Premium package \| Tech package \| Harmon Kardon \| PDC \| Rearview Cam \| IND Painted reflectors \| BMW performance grills \| JB4 stage 2 \| ER downpipe \| BMS Intake \| H&R sport springs
	Appreciate 0 Quote