[Frs4l]

Hi bimmers !

i have a little problem that been bothering me for a couple of days now with my welcome lights.

recently i did retrofit power folding mirrors and had to code VO then FEM coding so i weirdly lost all my coding, i was able to code everything back easy but not the welcome lights

so my actual coding when unlocking the car the lights goes on (Angel eyes, xenon) day 'n night, so i coded only in dark but in the day my DRL doesnt light up, before when unlocking the car in daylight the DRL & fog light lights up sosftly and in night time (foglight, angel eyes, xenon + door handles) lights up i cant put it back as it is

please can someone tell me whats the proper coding for that,

i tried some previous treads but no luck, thank you in advance

[COLOR="DarkRed"]apparently it's another option called I guess (coming home/leaving home) which lights up the cabin and the headlight for you before and after you quit the car, it seems that I lost this option from my NBT anyone with coding for it please thanks [/COLOR]

[TheNine90]

This is the code for DRL part of welcome light
MAPPING_TAGFAHRL_V_L_PART_OF_WL
MAPPING_TAGFAHRL_V_R_PART_OF_WL

[Frs4l]

Originally Posted by TheNine90

This is the code for DRL part of welcome light
MAPPING_TAGFAHRL_V_L_PART_OF_WL
MAPPING_TAGFAHRL_V_R_PART_OF_WL

In fact they're on, I just need to know what to code to get that day (DRL) and night (DRL & Xenon) like get the car to distinguish between the day 'night & thanks for your reply

[TheNine90]

Dont know how to change individually for night and day. Never seen that option. Maybe someone else knows.

[Frs4l]

Originally Posted by TheNine90

Dont know how to change individually for night and day. Never seen that option. Maybe someone else knows.

Thank you anyway ! Someone told me to code tfl_Modus idk maybe its what am looking about, I'll give it a try

[4x4kiwi]

I believe tfl_Modus decides which positions of the light switch DRL's operate i.e. tfl_s is in off and Auto posn. David

[Frs4l]

Originally Posted by 4x4kiwi

I believe tfl_Modus decides which positions of the light switch DRL's operate i.e. tfl_s is in off and Auto posn. David

Thank you for your reply, well I was told to put TFL_Modus in DRL_S, I went to the car now and this is what I found

[Frs4l]

Originally Posted by Frs4l

Hi bimmers !

i have a little problem that been bothering me for a couple of days now with my welcome lights.

recently i did retrofit power folding mirrors and had to code VO then FEM coding so i weirdly lost all my coding, i was able to code everything back easy but not the welcome lights

so my actual coding when unlocking the car the lights goes on (Angel eyes, xenon) day 'n night, so i coded only in dark but in the day my DRL doesnt light up, before when unlocking the car in daylight the DRL & fog light lights up sosftly and in night time (foglight, angel eyes, xenon + door handles) lights up i cant put it back as it is

please can someone tell me whats the proper coding for that,

i tried some previous treads but no luck, thank you in advance

Anyway I came to conclusion that what I need it's not welcome lights it's (follow me home or coming/leaving home) option 😓 my bad guys any help coding those please the option disparues from my HU

[4x4kiwi]

Drl_s enables the DRL's in the Park posn of the light switch, as well as Off and Auto
I think what you are after is Headlamp courtesy delay feature
(from the manual)

The low beams stay lit for a short while if the
headlamp flasher is switched on after the ignition
is switched off.
Setting the duration
1. "Settings"
2. "Lighting"
3. "Pathway light.: s"
4. Set the duration.
The setting is stored for the remote control currently
in use.

[Frs4l]

Originally Posted by 4x4kiwi

Drl_s enables the DRL's in the Park posn of the light switch, as well as Off and Auto
I think what you are after is Headlamp courtesy delay feature
(from the manual)

The low beams stay lit for a short while if the
headlamp flasher is switched on after the ignition
is switched off.
Setting the duration
1. "Settings"
2. "Lighting"
3. "Pathway light.: s"
4. Set the duration.
The setting is stored for the remote control currently
in use.

Unfortunately I lost the option when I flashed my nbt evo 🤦🏻*♂️ so if there's something I can code for that I'll appreciate it

[4x4kiwi]

Do you have the welcome lights selection in that menu

[Frs4l]

Originally Posted by 4x4kiwi

Do you have the welcome lights selection in that menu

Yes sir, i have the welcome light in light settings, the checkbox to activate/deactivate and duration settings