[avgor123]

Originally Posted by thebadboy

thank you, so to 5km / h ==> 05

and 20 km / h ==>?

for that I understand


thank you very much

14 = 1*16 + 4

http://en.wikipedia.org/wiki/Hexadecimal

[thebadboy]

Originally Posted by avgor123

14 = 1*16 + 4

http://en.wikipedia.org/wiki/Hexadecimal

must be engineer to understand, lol

[avgor123]

Originally Posted by thebadboy

I have to look into Fembody, there is not WL FUNKTION- NSW

if anyone knows

Try this:
FEMBODY>3063
MAPPING_NEBELSCHW_R_PART_OF_WL
MAPPING_NEBELSCHW_L_PART_OF_WL

REM>3063
MAPPING_NEBELSCHLUSSL_R_PART_OF_WL
MAPPING_NEBELSCHLUSSL_L_PART_OF_WL

[thebadboy]

Originally Posted by avgor123

Try this:
FEMBODY>3063
MAPPING_NEBELSCHW_R_PART_OF_WL
MAPPING_NEBELSCHW_L_PART_OF_WL

REM>3063
MAPPING_NEBELSCHLUSSL_R_PART_OF_WL
MAPPING_NEBELSCHLUSSL_L_PART_OF_WL

it is to turn the fog lights with the lighting welcome?


thank you

[avgor123]

Originally Posted by thebadboy

it is to turn the fog lights with the lighting welcome?


thank you

Yes. But I didn't try it.

[thebadboy]

Originally Posted by avgor123

Yes. But I didn't try it.

I seem to have read that this code is used to turn on the fog lights as you turn the steering wheel while driving

[JesseS]

Originally Posted by thebadboy

thank you, so to 5km / h ==> 05

and 20 km / h ==>?

for that I understand


thank you very much

20 = 14

[avgor123]

Originally Posted by thebadboy

I seem to have read that this code is used to turn on the fog lights as you turn the steering wheel while driving

No. Codes for cornering are

Fembody 3073 C_CLC_ENA
Fembody 3073 C_BLC_ENA
Fembody 3066 KL_ENABLE_LI
Fembody 3073 KL_ENABLE_RE
Fembody 3062 MAPPING_abbiegel_L_output
Fembody 3062 MAPPING_abbiegel_R_output

https://docs.google.com/spreadsheet/...Ia3ZmbUE#gid=0

[thebadboy]

Originally Posted by thebadboy

it is to turn the fog lights with the lighting welcome?


thank you

thank you, I'll test

[thebadboy]

how to unlock internet when driving,

thank you

[shawnsheridan]

The codes from chassis to chassis vary, but are usually similar enough in name to locate the equivalent code making some educated guesses as avgor123 has done:

F10:

WL_FUNKTION_NSW:

F30:

Originally Posted by avgor123

Try this:
FEMBODY>3063
MAPPING_NEBELSCHW_R_PART_OF_WL
MAPPING_NEBELSCHW_L_PART_OF_WL

REM>3063
MAPPING_NEBELSCHLUSSL_R_PART_OF_WL
MAPPING_NEBELSCHLUSSL_L_PART_OF_WL

[shawnsheridan]

Originally Posted by avgor123

Theoretical question.
If somebody hit the "Code default values" button on any ECU, how to get working CAFD file for that ECU?

You would use "Detect CAF for SWE" to inject new CAFD in ECU, and then VO Code the ECU.

In some cases though, it is impossible to recover from "Code Default Values", and the car will end up on a flatbed truck heading to the Dealership.

[steve@codemybimmer]

Originally Posted by shawnsheridan

You would use "Detect CAF for SWE" to inject new CAFD in ECU, and then VO Code the ECU.

In some cases though, it is impossible to recover from "Code Default Values", and the car will end up on a flatbed truck heading to the Dealership.

What exactly does Code Default Values do?

[shawnsheridan]

Originally Posted by Aritaurus

What exactly does Code Default Values do?

It's bad news, and should be avoided.

It will reset the ECU to a default manufacturers / factory condition independent of the car's VO.

[avgor123]

Originally Posted by Aritaurus

What exactly does Code Default Values do?

All parameters wipe to FF.
I have no idea what is the point of that function.

[avgor123]

Originally Posted by thebadboy

how to unlock internet when driving,

thank you

I guess it is impossible via coding, only via CAN-filter installation.

[shawnsheridan]

Originally Posted by avgor123

I guess it is impossible via coding, only via CAN-filter installation.

Yep. When using a Can-Filter, due to the VIN Mismatch, CIC thinks the car is stationary, so it works. There is no known way to code it.

[thebadboy]

Originally Posted by avgor123

I guess it is impossible via coding, only via CAN-filter installation.

Originally Posted by shawnsheridan

Yep. When using a Can-Filter, due to the VIN Mismatch, CIC thinks the car is stationary, so it works. There is no known way to code it.

ok, thank you all 2


what is a Can-Filter

[thebadboy]

who knows how to code for high beam assist is automatically activated with the headlight.

HU-cic 3000 acktiv,

but still it does not work.

for f10 must ==> FLA-verbaut and kafas2.

but f30 on there is not that

[ArchJR]

Can someone PM a link to the latest software? Got cable, read this extensive thread, and ready to try it out. Thanks in advance!

[SharksF31]

Hi guys,
I'm new to this board and I find it very interesting, so much info!
I'm from the Netherlands and my new F31 will be delivered in a couple of weeks! I already ordered a cable and now I need some help with the necessary software....
Can anyone send me the latest software and tokens for coding a new F31?

mail it to *******

Thanks!

SharksF31

[shawnsheridan]

Originally Posted by JesseSRQ

Can someone PM a link to the latest software? Got cable, read this extensive thread, and ready to try it out. Thanks in advance!

Originally Posted by SharksF31

Hi guys,
I'm new to this board and I find it very interesting, so much info!
I'm from the Netherlands and my new F31 will be delivered in a couple of weeks! I already ordered a cable and now I need some help with the necessary software....
Can anyone send me the latest software and tokens for coding a new F31?

mail it to smbaron [at] gmail [dot] com

Thanks!

SharksF31

PM / Email sent.