BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

shawnsheridan · 08-17-2013, 05:13 PM

Quote:

Originally Posted by 1lyfe

could oyu pm me the info for telnetting into cic as well
thanks

PM sent.

BMWFanatic2008 · 08-17-2013, 09:40 PM

What are the minimum PC requirements to run the latest version of E-Sys 3.22.5?

shawnsheridan · 08-17-2013, 09:47 PM

Quote:

Originally Posted by BMWFanatic2008

What are the minimum PC requirements to run the latest version of E-Sys 3.22.5?

Pretty damn basic. A Pentium processor and 1 gb of ram will work, of course it will be slow as hell, but it will run.

kneesliding · 08-17-2013, 11:23 PM

Quote:

Originally Posted by shawnsheridan

Not change to 6NH. You need to replace 6NH with 6NK.

If you have 6NK in the VO, and VO Code Combox and Head Unit, you should not have to FDL Code A2DP for Bluetooth Streaming to work. That is the whole purpose of modifying the VO and VO Coding ECU's, so you do not have to make all the individual FDL Code changes to support the 6NK Option Code.

Hi,

Typing error, have changed it to 6NK.

Will test it and see if the option is available.

Pete

shawnsheridan · 08-17-2013, 11:38 PM

Quote:

Originally Posted by kneesliding

Hi,

Typing error, have changed it to 6NK.

Will test it and see if the option is available.

Pete

Ok. Make sure you VO Code:

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE.

kneesliding · 08-17-2013, 11:55 PM

Hi,

do you mean "right click" here?

And then select "code"

Pete

shawnsheridan · 08-18-2013, 12:01 AM

Quote:

Originally Posted by kneesliding

Hi,

do you mean "right click" here?

And then select "code"

Pete

Yes.

Frogman · 08-18-2013, 12:16 AM

Quote:

Originally Posted by shawnsheridan

Yes.

I thought that NBT based cars needed 6NH changed to 6NS and not 6NK to get enhanced BT / Office / etc.

I have not seen an NBT based F30 yet, so I don't know for sure...

Can anyone confirm this either way?

kneesliding · 08-18-2013, 12:17 AM

Hmm.

error!

[Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00000ded-002_002_008:
DataGroup AUDIO_TUNER_TRAFFIC, Function MICROPHONE_NUMBER: More than one condition parameter is active: [wert_1, wert_2]
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithErrorInTransaction". [C207]
TAL execution finished. Duration: "16s". [C206]
Abarbeitung beendet

shawnsheridan · 08-18-2013, 12:21 AM

Quote:

Originally Posted by Frogman

I thought that NBT based cars needed 6NH changed to 6NS and not 6NK to get enhanced BT / Office / etc.

I have not seen an NBT based F30 yet, so I don't know for sure...

Can anyone confirm this either way?

I am not sure what determines whether 6NK or 6NS should be used.

6NS in new, and for F10, which has had NBT since MY 2013, NBT preceded the availability of 6NS. For F30, maybe 6NS can / should always be used.

shawnsheridan · 08-18-2013, 12:23 AM

Quote:

Originally Posted by kneesliding

Hmm.

error!

[Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00000ded-002_002_008:
DataGroup AUDIO_TUNER_TRAFFIC, Function MICROPHONE_NUMBER: More than one condition parameter is active: [wert_1, wert_2]
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithErrorInTransaction". [C207]
TAL execution finished. Duration: "16s". [C206]
Abarbeitung beendet

Are you sure you removed and replaced 6NH with 6NK, instead of just adding 6NK? You can't have both option codes present at the same time.

kneesliding · 08-18-2013, 12:35 AM

How do you mean remove it?

I followed the instructions in the PDF and changed 6NH to 6NK.

Or have I done it wrong.

shawnsheridan · 08-18-2013, 12:39 AM

Quote:

Originally Posted by kneesliding

How do you mean remove it?

I followed the instructions in the PDF and changed 6NH to 6NK.

Or have I done it wrong.

If you changed existing 6NH to 6NK, then that is correct. If you left 6NH there, and added 6NK, so now both are there, then that would be wrong. It is easy to tell. Just read FA, look at all the option codes, and see if both are there, or just the new 6NK.

If you did it right, and you can't VO Code NBT, then change 6NK to 6NS and try again.

kneesliding · 08-18-2013, 01:43 AM

Yippeee!

I can confirm for vehicles with HU_NBT to code Bluetooth you need to change to 6NS and not 6NK.

So, any tips on coding the office function?

shawnsheridan · 08-18-2013, 01:46 AM

Quote:

Originally Posted by kneesliding

Yippeee!

I can confirm for vehicles with HU_NBT to code Bluetooth you need to change to 6NS and not 6NK.

So, any tips on coding the office function?

Try FDL Coding:

HU_NBT => MACRO_PIM = aktiv

kneesliding · 08-18-2013, 01:50 AM

Shows as Activ.

Guess I need to see what differences are in the menus after coding 6NS.
And then see what needs to be activated.

shinerune · 08-18-2013, 02:29 AM

Quote:

Originally Posted by shawnsheridan

If you have KAFAS Camera, and not the cheaper HBA Camera, then maybe. But SLI requires a 7E (AppID 126) FSC Code Imported and Activated in KAFAS ECU. This may prove difficult and costly to get.

i'm not sure about KAFAS camera, i took a picture from my camera, can you tell me if it's the KAFAS camera or not. I also have "anti-collision warning and ACC stop & go" which are suppose used the KAFAS camera.

shawnsheridan · 08-18-2013, 02:33 AM

Quote:

Originally Posted by shinerune

i'm not sure about KAFAS camera, i took a picture from my camera, can you tell me if it's the KAFAS camera or not. I also have "anti-collision warning and ACC stop & go" which are suppose used the KAFAS camera.

If you have Kafas Camera, you will have Kafas ECU in your E-Sys SVT Tree, which I do not think is present with cheaper HBA Camera.

kneesliding · 08-18-2013, 02:47 AM

Hi,

so, am finally making some progress...

I saw here a post on what needs to be coded in order to play DVD while driving, but also for enabling USB Video, and various codex support, cant seem to find it anymore,

Someone know where it is or can send me the info?

Cheers,

PEte

shinerune · 08-18-2013, 02:49 AM

here the picture of my rear view mirror.
At this time i don't have acces to e-sys program.

kneesliding · 08-18-2013, 02:50 AM

Quote:

Originally Posted by shinerune

here the picture of my rear view mirror.
At this time i don't have acces to e-sys program.

Is that not the standard one?

On mine, it has "Connected Drive" on the glass below the camera.

shawnsheridan · 08-18-2013, 02:51 AM

Quote:

Originally Posted by shinerune

here the picture of my rear view mirror.
At this time i don't have acces to e-sys program.

Looks like Kafas, but I would confirm with E-Sys when you next connect to the car.

08-17-2013, 09:40 PM	#4358
BMWFanatic2008 Major 233 Rep 1,179 Posts Drives: 2023 M3 6MT Join Date: Dec 2008 Location: Miami iTrader: (5)	What are the minimum PC requirements to run the latest version of E-Sys 3.22.5? __________________ Current: 2022 X3M Comp Previous: 2020 X4M Comp \| 1982 E24 633CSi \| 2016 F82 M4 \| 2015 F80 M3 \| 2014 F30 335xi \| 2013 F30 335xi \| 2010 E92 335xi
	Appreciate 0 Quote

08-17-2013, 11:55 PM	#4362
kneesliding Private 3 Rep 88 Posts Drives: BMW F31 320d Touring Join Date: May 2013 Location: Kaiserslautern Germany iTrader: (0)	Hi, do you mean "right click" here? And then select "code" Pete
	Appreciate 0 Quote

08-18-2013, 12:17 AM	#4365
kneesliding Private 3 Rep 88 Posts Drives: BMW F31 320d Touring Join Date: May 2013 Location: Kaiserslautern Germany iTrader: (0)	Hmm. error! [Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00000ded-002_002_008: DataGroup AUDIO_TUNER_TRAFFIC, Function MICROPHONE_NUMBER: More than one condition parameter is active: [wert_1, wert_2] [] finalizeVehicleCoding started [] finalizeVehicleCoding finished [] finalizeTALExecution started [] finalizeTALExecution finished TAL execution finished TAL-Execution finished with status: "FinishedWithErrorInTransaction". [C207] TAL execution finished. Duration: "16s". [C206] Abarbeitung beendet
	Appreciate 0 Quote

08-18-2013, 12:35 AM	#4368
kneesliding Private 3 Rep 88 Posts Drives: BMW F31 320d Touring Join Date: May 2013 Location: Kaiserslautern Germany iTrader: (0)	How do you mean remove it? I followed the instructions in the PDF and changed 6NH to 6NK. Or have I done it wrong.
	Appreciate 0 Quote

08-18-2013, 01:43 AM	#4370
kneesliding Private 3 Rep 88 Posts Drives: BMW F31 320d Touring Join Date: May 2013 Location: Kaiserslautern Germany iTrader: (0)	Yippeee! I can confirm for vehicles with HU_NBT to code Bluetooth you need to change to 6NS and not 6NK. So, any tips on coding the office function?
	Appreciate 0 Quote

08-18-2013, 01:50 AM	#4372
kneesliding Private 3 Rep 88 Posts Drives: BMW F31 320d Touring Join Date: May 2013 Location: Kaiserslautern Germany iTrader: (0)	Shows as Activ. Guess I need to see what differences are in the menus after coding 6NS. And then see what needs to be activated.
	Appreciate 0 Quote

08-18-2013, 02:47 AM	#4375
kneesliding Private 3 Rep 88 Posts Drives: BMW F31 320d Touring Join Date: May 2013 Location: Kaiserslautern Germany iTrader: (0)	Hi, so, am finally making some progress... I saw here a post on what needs to be coded in order to play DVD while driving, but also for enabling USB Video, and various codex support, cant seem to find it anymore, Someone know where it is or can send me the info? Cheers, PEte
	Appreciate 0 Quote

08-18-2013, 02:49 AM	#4376
shinerune New Member 0 Rep 10 Posts Drives: F30 330D x-drive Join Date: Aug 2013 Location: belgium iTrader: (0)	here the picture of my rear view mirror. At this time i don't have acces to e-sys program.
	Appreciate 0 Quote