02-15-2013, 07:36 AM | #2685 |
Private
16
Rep 69
Posts |
|
Appreciate
0
|
02-15-2013, 11:29 PM | #2686 |
Enlisted Member
2
Rep 39
Posts |
Have you tried to make sure that your torrent is properly configured to run, i.e. firewalls, ports and such? Try using the setup guide under options for utorrent. I am seeding and there are plenty of seeds going on.
|
Appreciate
0
|
02-16-2013, 09:04 AM | #2688 |
Major
77
Rep 1,027
Posts |
i did and i drove across time zone few times with no change..
__________________
M Sport Line Estoril Blue
|
Appreciate
0
|
02-16-2013, 08:26 PM | #2689 |
Enlisted Member
14
Rep 45
Posts |
Hello guys,
Having a problem after getting 3.22 and 48.3: When trying to access HU_CIC (honestly I haven't checked other ECUs) I get this error "error occurred while processing the est file code away.est", with this inside it "no uids within certificate", with a long list of reversed domains (com.xxx.xxx.xxx). Just like in this thread, but it's in Chinese and Google translator does a really bad job http://www.google.ro/url?sa=t&rct=j&...42553238,d.Yms For the record, yes I installed and configured everything properly (ODX, EST, Data folder, psdzdata, EDIABAS) Any idea? Should I just uninstall 3.22 and put 3.18 back? I'd really like to make 3.22 work though, the loading time difference between the two is substantial; for me at least. |
Appreciate
0
|
02-16-2013, 10:52 PM | #2690 |
Lieutenant Colonel
288
Rep 1,892
Posts |
|
Appreciate
0
|
02-16-2013, 11:04 PM | #2691 | |
Lieutenant Colonel
288
Rep 1,892
Posts |
Quote:
The link you sent references using 46.3, so are you using 48.3 or 46.3? It makes a big difference. my .est file is also 3KB, so it looks like the right size. I also see that the .est file path is padzdata, it's usually psdzdata. Is the issue simply a typo in the path name? |
|
Appreciate
0
|
02-17-2013, 05:02 AM | #2693 | |
Enlisted Member
14
Rep 45
Posts |
Quote:
I had no idea est files are different, when I installed Esys 3.22 I had nothing but the executable file, so I had to take it from the Esys 3.18 archive I had lying around. Where do I get this new est file from? I downloaded the 3.22 Esys and 48.3 psdzdata from the torrent someone posted a few pages ago and there was no new est file, or I totally missed it. :S As I said, everything is set up properly. |
|
Appreciate
0
|
02-17-2013, 08:47 AM | #2694 | |
General
10413
Rep 40,650
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
02-17-2013, 08:48 AM | #2695 |
General
10413
Rep 40,650
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
You don't generate it. You need to find a real VIN that has factory Options 614 and 615.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
02-17-2013, 10:32 AM | #2696 |
Lieutenant Colonel
541
Rep 1,894
Posts |
Hi, I've got the following files from this thread previously - E-Sys 3.18.4 and PSDZDATA 47.7.
As pointed out to me by another forum member the PSDZDATA only works for particular firmware versions. School boy question but how do I know what version is running in my car? |
Appreciate
0
|
02-17-2013, 10:41 AM | #2697 | |
New Member
2
Rep 10
Posts |
Quote:
My physical/virtual NIC adapter detects the cable, I receive a class B ip address (ZGW nevertheless remains empty) but in E-sys the connection by VIN remains greyed out and states "no ZGW available". Can anybody confirm he can code a F3x model produced end 2012/delivered jan 2013 ? Could it be I have a version running on my car which is not compatible with e-sys 3.18.4 and pszd 48.1 or is my cable faulty ? I know it should work virtual (VMware fusion/Parallels) on a MacBook but I am going to arrange a laptop running windows to see what happens. Grtz, Ray |
|
Appreciate
0
|
02-17-2013, 11:43 AM | #2698 | |
Private
44
Rep 69
Posts |
Quote:
Good luck |
|
Appreciate
0
|
02-17-2013, 12:34 PM | #2699 |
New Member
1
Rep 29
Posts |
I have been reading this thread to get an understanding of the what software tools are necessary to recode my car (delivery sometime this week). Looking at the cheat sheet I see that the 2012 column has 'X's in a variety of colors, but nothing in the 2013 column. Is recoding a MY2013 the same as MY2012?
|
Appreciate
0
|
02-17-2013, 01:03 PM | #2700 | |
General
10413
Rep 40,650
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
http://www.f30post.com/forums/showpo...postcount=1403 Then cross your I-Level current to the ISTA/P: ISTA/P 2.42.0 F020-11-07-501 ISTA/P 2.42.1 F020-11-07-503 ISTA/P 2.42.2 F020-11-07-503 ISTA/P 2.43.0 F020-11-07-503 ISTA/P 2.43.1 F020-11-07-504 ISTA/P 2.43.2 F020-11-07-504 ISTA/P 2.44.0 F020-11-11-502 ISTA/P 2.45.0 F020-11-11-502 ISTA/P 2.45.1 F020-11-11-504 ISTA/P 2.45.2 F020-11-11-505 ISTA/P 2.46.0 F020-12-03-501 ISTA/P 2.46.1 F020-12-03-503 ISTA/P 2.46.2 F020-12-03-503 ISTA/P 2.46.3 F020-12-03-503 ISTA/P 2.46.4 F020-12-03-520 ISTA/P 2.47.0 F020-12-07-530 ISTA/P 2.47.1 F020-12-07-530 ISTA/P 2.47.2 F020-12-07-530 ISTA/P 2.47.3 F020-12-07-530 ISTA/P 2.47.4 F020-12-07-532 ISTA/P 2.47.5 F020-12-07-533 ISTA/P 2.47.6 F020-12-07-533 ISTA/P 2.47.7 F020-12-07-533 ISTA/P 2.48.0 F020-12-11-502 ISTA/P 2.48.1 F020-12-11-502 ISTA/P 2.48.2 F020-12-11-504 ISTA/P 2.48.3 F020-12-11-505
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
02-17-2013, 02:11 PM | #2701 | |
General
10413
Rep 40,650
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
02-17-2013, 02:16 PM | #2702 |
Private
1
Rep 51
Posts |
|
Appreciate
0
|
02-17-2013, 02:36 PM | #2704 |
Registered
1
Rep 46
Posts |
Need some assistance... I got my car last week and did some coding without problem. However, I tried to code the car to get the side mirrors to fold/unfold using the remote key but doesn't work. I don't have the Premium package with the comfort access, is that the reason why? I've set the following to "aktiv":
FEM_BODY 3110 ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN FEM_BODY 3110 ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN Is there any other option that I have to code or any other way around it? I'm supposed to hold the Lock button for a set time? Not sure if I'm doing something wrong. I also changed FEM_BODY 3050 FH_Tuerauf_stop_maut for uninterrupted window roll-up, but doesn't seem to work either. Any help is much appreciated!
__________________
2013 335i ///M-Sport |6MT|Mineral Grey|DHP|PDC|HK|
|
Appreciate
0
|
02-17-2013, 02:39 PM | #2705 |
General
10413
Rep 40,650
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
It's a PIA, but I used random VIN's in www.bmwvin.com till I found one.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
02-17-2013, 06:32 PM | #2706 | |
Lieutenant Colonel
288
Rep 1,892
Posts |
Quote:
Note that Werte=00 is not a typo, it's a strange one in that usually aktiv has a Werte=01 and nicht_aktiv has a werte of 00). This one does not! Just code the function value to aktiv and leave the Werte alone and you will be fine. I can't help you on the FEM_BODY / 3050 / FH_TUERAUF_STOP_MAUT, that only needs that one value to be changed. Note that you need to set it to nicht_aktiv (default is aktiv). You should double check that it's actually coded to nicht_aktiv by re-reading the coding data from the car. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|