[ryanSTL]

Originally Posted by betlion

the m sport bumper have no pre-drilled holes

does the reiger lip come with any hardware and/or double sided tape? thanks bro, useful info!

[tboooe]

Originally Posted by ryanSTL

I prefer the more interesting (to me) Reiger design, $200 cheaper, and plus I don't have any other carbon fiber on my car.

My car is basically all Carbon Black, Matte Black, shadowline trim, tint and nothing else going on (chrome, badges, etc). Consistency ... and less is more for me in a lot of ways.

This is kindof the reason I'm struggling with picking out wheels..

yeah I am torn. there are aspects of both I like. I like how the actual lip of the Reiger does not stick out as far as the RW Carbon/3D one. However, I dont like the look between the Reiger and the bottom of the bumper as it curves under the car.

[betlion]

reiger lip doesn't come with double sided tape, but rivets

[ryanSTL]

Originally Posted by betlion

reiger lip doesn't come with double sided tape, but rivets

alright man, thanks. ESE shipped it today, so I'll wait & see how it goes & play it by ear.

[betlion]

best lip for the f32 imo

[ryanSTL]

My lip gets delivered today. Nice little weekend project for me.
Wheels, tires, & springs are imminent if I could just make a decision!

[tboooe]

Originally Posted by ryanSTL

My lip gets delivered today. Nice little weekend project for me.
Wheels, tires, & springs are imminent if I could just make a decision!

Please post pics. I am leaning towards getting this too.

[PRODIGAL KING]

Only question I have for you is why didn't you get the gloss black to match your kidney grills and all the other gloss black on the car? Just curious

[betlion]

Didn't get glossy black because the m4 side skirt extension is matte

[ryanSTL]

installed. only took three beers. my bumper finally looks finished!
thanks for the heads up on this lip, I really like it.
phone pics

[tboooe]

Nice. Did you use any double sided tape or just the included screws? I assume you had drill into the bumper?

[ryanSTL]

Originally Posted by tboooe

Nice. Did you use any double sided tape or just the included screws? I assume you had drill into the bumper?

i did not use any tape. There are 8 existing screws & 2 existing clips that don't require drilling. Using those ensure perfect alignment.

From there, yes there are 14 pre-drilled locations along the front edge of the lip for rivets. Those require drilling in the underside of the bumper. I like it because the rivets bring the lip super flush with the car and the holes won't be seen or noticed really if I ever remove the lip. The fit is waaaaay secure.

very happy. i'll take some better pics hopefully this weekend.
the car is now screaming for the M4 side sills and of course wheels, etc. it just don't stop, auuughhh

[tboooe]

It never ends. Do the side sills. I love mine.

[ryanSTL]

washed the car, but the sun was already going down. here are a couple pics

[FC4]

Very nice. Mine is on its way as well.

[tboooe]

ryanSTL any chance of a pic of the front more at ground level? I want to have a better look at the part of the spoiler that seems to stick up in the middle section. I think with your dark car, this feature doesnt stand out as much but my car is Alpine White.

[///WORK-F36]

Vorsteiner lip coming out real soon for the F32/F36...looking forward to seeing how it looks

[tboooe]

Originally Posted by ///WORK-F36

Vorsteiner lip coming out real soon for the F32/F36...looking forward to seeing how it looks

One thing for sure it's going to be expensive!

[ryanSTL]

Originally Posted by tboooe

ryanSTL any chance of a pic of the front more at ground level? I want to have a better look at the part of the spoiler that seems to stick up in the middle section. I think with your dark car, this feature doesnt stand out as much but my car is Alpine White.

yeah man, no problem. i will take a few better pictures this weekend, maybe tomorrow if I can.

[TopgearLA]

Originally Posted by betlion

I lined up the fronts first not the rears

the length was dead on

i didn't have to cut anything

Can you tell me how your process for attaching the M4 side extensions? Id prefer not to cut them either. Id be very interested as im getting a front lip.

[tboooe]

Originally Posted by TopgearLA

Can you tell me how your process for attaching the M4 side extensions? Id prefer not to cut them either. Id be very interested as im getting a front lip.

The extensions are attached via doublesided tape and 15 plastic expanding screws on each side. You will have to drill into the rocker panel.

I ended up cutting mine to make it fit better but I think you can install without cutting. I am not so sure how flat the sills will sit unless you cut some material away. I also think you have to file a small section down to allow the the sill to be positioned correctly. Check out my build thread. In the first post is a link to what I had to do to mod and install the extensions.

Let me know if you have any questions.

[reddemon73]

Nice car. I like your wheel. Please share the specs. Thanks