Left side lower than right

Nomana · 07-19-2015, 05:50 AM

Hi
My f32 RHD shows the left side 20mm lower than right side.

I understand that it's normal for the car to not balance both side especially if right side is lower.

However, my car acts different from others. I can really notice that passenger side(left) lower than driver side when look from the rear of the car.

My car is all stock no lower or rims changed.

Used to ask SA about it but he said it's normal but i'm not be convinced.

Cheers

E90Fleet · 07-19-2015, 06:30 AM

RHD
Stick an adult male in the drivers seat and watch it level out

Nomana · 07-19-2015, 06:45 AM

Quote:

Originally Posted by E90Fleet

RHD
Stick an adult male in the drivers seat and watch it level out

Yeah right
Just don't know why mine is opposite to others:
http://f30.bimmerpost.com/forums/sho...d.php?t=763641

http://f30.bimmerpost.com/forums/sho...d.php?t=879550

Billfitz · 07-19-2015, 08:22 AM

Measure it on a level surface. If the difference is more than 10mm it's not right.

07-19-2015, 05:50 AM	#1
Nomana Lieutenant Colonel 1466 Rep 1,637 Posts Drives: BMW Join Date: Sep 2014 Location: SN iTrader: (0)	Hi My f32 RHD shows the left side 20mm lower than right side. I understand that it's normal for the car to not balance both side especially if right side is lower. However, my car acts different from others. I can really notice that passenger side(left) lower than driver side when look from the rear of the car. My car is all stock no lower or rims changed. Used to ask SA about it but he said it's normal but i'm not be convinced. Cheers
	Appreciate 0 Tweet Quote

07-19-2015, 06:30 AM	#2
E90Fleet Lieutenant General 1312 Rep 10,185 Posts Drives: BMW Join Date: Apr 2005 Location: South Africa iTrader: (0)	RHD Stick an adult male in the drivers seat and watch it level out __________________ BMW if you are reading, I need a job, Please.
	Appreciate 0 Quote

07-19-2015, 08:22 AM	#4
Billfitz Lieutenant General 8225 Rep 16,063 Posts Drives: '15 328iX GT Join Date: Jan 2015 Location: New Hampshire iTrader: (0)	Measure it on a level surface. If the difference is more than 10mm it's not right.
	Appreciate 0 Quote