08-28-2015, 04:31 AM | #1 |
BMW Fanatic
331
Rep 1,076
Posts |
Messed Up on HU_ENTRY
Hey guys,
Whilst coding my car today, I forgot that the rear camera was on, so E-Sys gave me an error, which I didn't save. I went on to turning off the camera and trying again, but the same error would show, from my memory it was that something wouldn't deploy. Anyways, I figured disconnect and reconnect was the way, so after doing that, my HU_Entry shows no cafd file in it for me to code. Anyone know how I can fix this? I searched on the forum, almost no one had the same mistake I did. Edit: Found a solution on the 2 series forums. Thanks to Pikachu, now I have hope. Will try this shortly. Connect => Read FA => Activate FA => Read VCM => Left-Click on HU_ENTRY => Click on "Detect CAF for SWE" => Select the CAFD matching your I-Level => Select OK => Right-Click on HU_ENTRY => Select CODE.
__________________
18 BMW M2 | ER DP | ER CP | Wagner Evo 2 Comp Intercooler | Aquamist HFS4 | BM3 | CSF Oil Cooler | AFE Drop-in Filter | Bilstein B16 PSS10 Last edited by 963mw; 08-28-2015 at 04:40 AM.. |
08-28-2015, 11:40 PM | #2 | |
Major General
1399
Rep 5,262
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|