[magic77]

Just wondering for those who coded EBT did you ever retrofit the second microphone

Noticed it now logs a descreet fault stating issue with second microphone on my F30

[TePee]

I have coded EBT and then FDL coded only one micro. It works fine and there is no fault code.

[magic77]

thanks something I missed when coding mine will need to take a look. At same time if it improves sound quality wouldn't mind adding the second micro

[Tim@codemybimmer]

Just for a heads-up for the coding:

HU_NBT > MICROPHONE_NUMBER > Werte_1 (Single) or Werte_2 (Dual)

[magic77]

thanks Timbits
I will leave that as last resort as rather would prefer to install the second mic.

Just finding is proving a challange

[deneyer]

Originally Posted by TePee

I have coded EBT and then FDL coded only one micro. It works fine and there is no fault code.

If you code EBT you have a error code, you might not see it on your idrive settings. But if you read the care using ISTA you get an error 2nd microphone open circuit. i bought micro + cable and am going to install it

pin 1 micro 26 tcb
pin 2 micro 13 tcb

[magic77]

woudlnt mind doing this as coded mine out, can you post info on the parts needed and where u wired up to

[deneyer]

Originally Posted by magic77

woudlnt mind doing this as coded mine out, can you post info on the parts needed and where u wired up to

https://www.ebay.de/itm/BMW-Cic-Nbt-....c100009.m1982

And like i allready told you thats for an f34 with TCB but guess its the same for f3x

pin 1 micro to pin 26 tcb
pin 2 micro to pin 13 tcb

[Beachparty]

Originally Posted by Tim@codemybimmer

Just for a heads-up for the coding:

HU_NBT > MICROPHONE_NUMBER > Werte_1 (Single) or Werte_2 (Dual)

Hi Tim,

Would you have the coding for the CIC_HU by any chance ?
I ran in the same issue and I keep getting the message for open mic

Thanks

J