[jaddie]

Hey guys,

I was just wondering if anyone might know what needs to be changed to make the indicators work?

Every time that I try to use them since the flash to v59 they won't work.

I had this problem before, and I never managed to sort it via ESYS myself.

I used at the time the version of Rheingold that I had since it suggested teaching in the LEDs & as soon as it did that everything was well again.

However the version of it that I have right now doesn't make that suggestion for some reason, so I am trying to get my hands on a newer version of it in case that helps, I think I used v3.50 before, and now I am on v3.52.

However I am trying to get a copy of v3.56

But if anyone knows how to sort the LEDs via ESYS that'd be amazing, as I have checked pretty much everything and can't see a problem,but it would be great to re-confirm values for a F32 with someone!

The "BMW drivers don't use indicators" jokes at work are going to be raining down on me!

Thanks in advance!!

[atzebmw]

Do you have Esys?
Then check out the values "MAPPING_SIDEMARKER_L_OUTPUT" and "MAPPING_SIDEMARKER_R_OUTPUT".
If it's off, then choose "fra_v_l" and "fra_v_r".

[jaddie]

I'll double check those values but I am 99% sure those are already set as you specified, as I went through all those, originally RG was complaining about a mapping issue, but I can't see any problems there either.

Its driving me insane, since RG did a teach in method last time, but I don't know how to trigger that in ESYS as RG isn't offering it anymore.

[dmnc02]

Originally Posted by jaddie

I'll double check those values but I am 99% sure those are already set as you specified, as I went through all those, originally RG was complaining about a mapping issue, but I can't see any problems there either.

Its driving me insane, since RG did a teach in method last time, but I don't know how to trigger that in ESYS as RG isn't offering it anymore.

You do not need Rheingold to suggest the teach in procedure (which is required after a replacement or reprogramming) in the measure plan in order to run it. Connect to the car with Rheingold as usual and then go to Vehicle management > Service function > Body > Lighting.

[jaddie]

Yeah I tried that but it didn't help, although I just checked those values that atzebmw suggested & they were indeed set incorrectly by the looks of it !

Hopefully that resolves my problem, I'll code it when I leave work and see if it helps!

Massive thanks in case it does haha

[p1p2p3p4]

Originally Posted by jaddie

Yeah I tried that but it didn't help, although I just checked those values that atzebmw suggested & they were indeed set incorrectly by the looks of it !

Hopefully that resolves my problem, I'll code it when I leave work and see if it helps!

Massive thanks in case it does haha

Hi jaddie just wondering were you ever able to figure this out i just ran in to the same issue i do have rheingold and esys please let me know what did you do to resolve it