F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > iND F30 painted bumper reflectors replacement DIY
Zims Garage
Post Reply
 
Thread Tools Search this Thread
      11-29-2013, 01:22 PM   #89
hansolo1019
Private First Class
4
Rep
161
Posts

Drives: 2016 F10 528i
Join Date: Aug 2013
Location: Los Angeles

iTrader: (0)

I just installed mine last night, heat gun is a must.

I was able to install both sides within 10 min with heat gun.
Appreciate 0
      11-29-2013, 01:49 PM   #90
tiburonarce1
Private
tiburonarce1's Avatar
United_States
7
Rep
67
Posts

Drives: 2015 335i
Join Date: Nov 2013
Location: Carson, CA

iTrader: (0)

Thanks ordered mine from ind and are on their way.
Appreciate 0
      03-07-2014, 12:37 AM   #91
livewyr25
New Member
0
Rep
25
Posts

Drives: 2014 F30 M Sport
Join Date: Jan 2014
Location: Long Island

iTrader: (0)

Quote:
Originally Posted by Nate@IND View Post
$75 shipped within the US
I know it's an old thread, but you charge for shipping now?
Appreciate 0
      12-13-2014, 02:36 AM   #92
F30kma
Enlisted Member
0
Rep
34
Posts

Drives: F30
Join Date: Sep 2014
Location: kma

iTrader: (0)

Anyone have pic of the rear reflectors install before and after? Post if you replaced the red rear reflector to match the color of the vehicle exterior body paint.

Thx!
Appreciate 0
      04-13-2015, 09:54 AM   #93
ska///235i
***** noob
ska///235i's Avatar
United_States
493
Rep
10,280
Posts

Drives: 325xi>M235i>428GCx Mspor
Join Date: Sep 2005
Location: Boston

iTrader: (34)

Garage List
2006 325xi  [0.00]
Ok, got it done

No need for pry tools, just a 8mm socket and a heatgun...also a pair of gloves

Do not try to do this in cold temps, my first attempt fail cuz the outside temp was around 40-50 degree. I'll say 60 degree and above will be better.

I use the heatgun on low and you have to heat all around the reflector for a good 3-5 minutes. Also a good idea to use a rope to hold the plastic fender. I tie it against the wheel so that it will remain open for access.

Push on the reflector and it will come off, if not keep heating it
__________________
2006 325xi (Sold)
2014 M235I (Current)
2015 428xi Gran Coupe (STB)
Appreciate 0
      05-18-2015, 01:31 AM   #94
E30toF30
Lieutenant
Canada
46
Rep
569
Posts

Drives: 2015 F30 335xi M Perf. Edition
Join Date: Mar 2015
Location: Vancouver

iTrader: (0)

Man just got these in the mail and reading about how much of a bitch it is do get around the camera is turning me off lol. Hope my wife doesn't catch me using her hair dryer lol
Appreciate 0
      05-27-2015, 02:33 AM   #95
E30toF30
Lieutenant
Canada
46
Rep
569
Posts

Drives: 2015 F30 335xi M Perf. Edition
Join Date: Mar 2015
Location: Vancouver

iTrader: (0)

Quote:
Originally Posted by E30toF30 View Post
Man just got these in the mail and reading about how much of a bitch it is do get around the camera is turning me off lol. Hope my wife doesn't catch me using her hair dryer lol
Ended up getting this done within 10-15 minutes or so. Ended up being easier than anticipated.

I think many have already stated that a hair dryer or heat gun makes the job 100x easier.

I used a hair dryer and it worked great. It may not seem like its really doing anything but let it sit there for a solid 3 minutes and you will notice it start to work its magic. AFter abuot 5-6 minutes, then entire reflector could peel off fairly easily. I used a plastic pry tool to help. I started the hair dryer at the top and then worked my way down.

GL to the rest of you! It really is quite easy!
Appreciate 0
      05-27-2015, 08:27 AM   #96
ska///235i
***** noob
ska///235i's Avatar
United_States
493
Rep
10,280
Posts

Drives: 325xi>M235i>428GCx Mspor
Join Date: Sep 2005
Location: Boston

iTrader: (34)

Garage List
2006 325xi  [0.00]
Be VERY careful with any type of pry tool...you can edge your bumper

Just heat the adhesive and push it out
__________________
2006 325xi (Sold)
2014 M235I (Current)
2015 428xi Gran Coupe (STB)
Appreciate 0
      05-27-2015, 08:43 AM   #97
itrocks4u
Major
79
Rep
1,392
Posts

Drives: '15 435ix F36 ('11 328ix E90)
Join Date: Aug 2011
Location: Toronto

iTrader: (3)

Quote:
Originally Posted by E30toF30 View Post
Ended up getting this done within 10-15 minutes or so. Ended up being easier than anticipated.

I think many have already stated that a hair dryer or heat gun makes the job 100x easier.

I used a hair dryer and it worked great. It may not seem like its really doing anything but let it sit there for a solid 3 minutes and you will notice it start to work its magic. AFter abuot 5-6 minutes, then entire reflector could peel off fairly easily. I used a plastic pry tool to help. I started the hair dryer at the top and then worked my way down.

GL to the rest of you! It really is quite easy!
You're using it from the inside or outside?
Appreciate 0
      05-27-2015, 12:37 PM   #98
E30toF30
Lieutenant
Canada
46
Rep
569
Posts

Drives: 2015 F30 335xi M Perf. Edition
Join Date: Mar 2015
Location: Vancouver

iTrader: (0)

Quote:
Originally Posted by itrocks4u View Post
You're using it from the inside or outside?
Using what from the inside or the outside?

Hairdryer hitting it from the outside
Pry tool just a little bit from the inside at first (kind of tough to get around the camera), and the once the reflector was clearly starting to peel off more easily, I would use the pry tool from the outside to simply separate the reflector from the bumper by sliding it between the two, separating the glue.

At this point you probably could use your hands to press the reflector inwards to separate it but I didn't like how the bumper was deflecting (although it was probably harmless).

Oh and HIGHLY RECOMMENDED.

USE WORK GLOVES to do this job (i think some others have mentioned this is important as well). They allow you to work with the hair dryer still running. It did get very warm, but it allowed me to work through the heat of the hairdryer. If you try to do this without gloves, your hands are going to burn!

I have a pair similar to this that I use to do random jobs around the house.
http://www.homedepot.ca/product/boxe...-gloves/967952

Last edited by E30toF30; 05-28-2015 at 02:30 AM.
Appreciate 1
      07-09-2015, 08:22 PM   #99
gpjustinn
First Lieutenant
gpjustinn's Avatar
United_States
52
Rep
302
Posts

Drives: 2014 BMW 320i - Alpine White
Join Date: May 2015
Location: Corpus Christi, TX

iTrader: (0)

Finally pulled the trigger on these and installed just now. I was hesitant about ordering them cause I wasn't sure they would look good on my car, even though I'd seen you guys' pics and thought they looked awesome! Nevertheless, I switched them out, and WOW, what a world of difference it makes! Call me crazy, but I think they even make my halogen headlights look better!! On the other hand, and slightly off topic, I switched the indicators to LED the other day, and am currently waiting on my xenon retrofits from Mike at XPH. I CANNOT wait until I install the xenons, it's totally gonna set off the look!

Install was fairly easy. Didn't use a heat gun or anything, just the pry bar that was included with the kit. I didn't shove the pry bar all the way thru like in the installation pics, I just wedged it far enough into the bottom of the reflector (from the inside) to where I could see it slightly from the outside of the fender, and then shimmied it across the bottom to release the adhesive. Once the bottom was free, just used my hands to carefully peel it off completely, remove the gunk, and install the new reflector. Passenger side took me maybe 10 minutes, being my first attempt. The driver side was easier, took me about 5 minutes, probably because the sun was directly hitting the fender.

Will post pics soon!
__________________
2014 BMW 320i Alpine White
Appreciate 0
      07-11-2015, 04:19 PM   #100
gpjustinn
First Lieutenant
gpjustinn's Avatar
United_States
52
Rep
302
Posts

Drives: 2014 BMW 320i - Alpine White
Join Date: May 2015
Location: Corpus Christi, TX

iTrader: (0)

Here's some before and after pics. I love the results!
Attached Images
   
__________________
2014 BMW 320i Alpine White
Appreciate 0
      07-13-2015, 12:23 AM   #101
whoisthis
Second Lieutenant
20
Rep
234
Posts

Drives: bmw
Join Date: Jun 2015
Location: michigan

iTrader: (0)

It would also be nice to just wrap the reflector with dark window tint.
__________________
F30 328i sedan
Appreciate 0
      09-09-2015, 05:23 PM   #102
voip-ninja
New Member
0
Rep
28
Posts

Drives: Audi A4
Join Date: May 2012
Location: Denver

iTrader: (0)

Do these fit the 2016 cars too? Itching to do this on my 2016 Alpine White 340xi M-Sport.
Appreciate 0
      10-20-2015, 02:43 PM   #103
maddog3xx8
Private First Class
United_States
4
Rep
133
Posts

Drives: F30 335i xDrive
Join Date: Apr 2014
Location: MA

iTrader: (2)

Are the reflectors the same for M sport and non m sport bumpers?
__________________
M Sport: ~JB4 STG 2 ~ FF Wires ~ AFE 5R Intake - Catless ER DP ~Tints ~ CF Interior Trim ~ CF Diffuser ~ CF Trunk Spoiler ~ CF Mirrors
Appreciate 0
      10-20-2015, 03:20 PM   #104
gpjustinn
First Lieutenant
gpjustinn's Avatar
United_States
52
Rep
302
Posts

Drives: 2014 BMW 320i - Alpine White
Join Date: May 2015
Location: Corpus Christi, TX

iTrader: (0)

Quote:
Originally Posted by maddog3xx8 View Post
Are the reflectors the same for M sport and non m sport bumpers?
No. The non M Sport reflectors are straight and run horizontally, whereas the M Sport reflectors are curved and run alongside the edge of the fender.
__________________
2014 BMW 320i Alpine White
Appreciate 0
      04-28-2016, 04:00 PM   #105
anshu
Private
6
Rep
90
Posts

Drives: 2013 335i (M-Sport)
Join Date: Apr 2016
Location: ATL

iTrader: (1)

Has anyone had problems installing the new set of reflectors? I was able to get my stock reflectors out with some prying and wasn't too hard.

I cleaned off the area, removed the adhesive and dried, but when I installed my cleared out markers (NON-IND), they left a gap that is very noticeable due to the adhesive not sticking on one edge. It was some 3M brand adhesive so this issue was unexpected.

Does the IND reflector use the OEM adhesive?
Appreciate 0
      04-30-2016, 05:51 PM   #106
Mousejunior
Enlisted Member
Canada
9
Rep
35
Posts

Drives: 2015 F32 435i M Perf Edition
Join Date: Mar 2016
Location: Toronto

iTrader: (0)

Took the plunge. Advise, hair dryer or heat gun. I would say minimum 5min and heat up the reflectors surrounding. Thanks to zman1237 for the reflectors.



Appreciate 0
      06-09-2016, 12:26 PM   #107
Sodhi16
Private First Class
Sodhi16's Avatar
13
Rep
119
Posts

Drives: BMW 335i M Performance Edition
Join Date: May 2016
Location: calgary

iTrader: (0)

Do we know of anyone who can help me out with some Laguna seca blue reflector replacements
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:30 PM.




f30post
f30post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST