[jpcampa]

Hi, I'm Juan Pablo from Spain, I'm a coder entuxiast. Some days ago, in my 05/2014 F31 I was making some coding, and when I finish I see that my car lost the optical confirmation (with blinkers) at lock/unlock...
I scary, I don't know what happend... I revert my fem to original and my hu also... but still no working....

Anyone can help me? any idea??

Thanks.

[Frogman]

Originally Posted by jpcampa

Hi, I'm Juan Pablo from Spain, I'm a coder entuxiast. Some days ago, in my 05/2014 F31 I was making some coding, and when I finish I see that my car lost the optical confirmation (with blinkers) at lock/unlock...
I scary, I don't know what happend... I revert my fem to original and my hu also... but still no working....

Anyone can help me? any idea??

Thanks.

Sometimes coding changes/clears iDrive settings.

Blinking on lock/unlock is in the Settings / Locks section. See if the check box was cleared.

[jpcampa]

Originally Posted by Frogman

Sometimes coding changes/clears iDrive settings.

Blinking on lock/unlock is in the Settings / Locks section. See if the check box was cleared.

This si the first I check... But were all right....

[Frogman]

If the iDrive setting is correct, then something must have gone wrong during coding.

You should VO code your FEM_BODY to restore the settings back to the factory default.

Have you made any changes to your FA? If so, you should revert those first, then do the VO coding of the FEM_BODY ECU.

[jpcampa]

Originally Posted by Frogman

If the iDrive setting is correct, then something must have gone wrong during coding.

You should VO code your FEM_BODY to restore the settings back to the factory default.

Have you made any changes to your FA? If so, you should revert those first, then do the VO coding of the FEM_BODY ECU.

Yes, I added lighting package, but I think the 'blinkers problem' was first, anyway I will try what you say... Thanks.

[smithf80]

Whatever You Do Do Not Hit Code Default Values