[mynewbmw]

Looking to diy wrap my roof glossy black was wondering if anyone has any opinion on the quality of these two wraps. I'm leaning towards Avery as I heard its a lot easier to wrap then 3M.

[DONDIWHO]

What is the price difference between a paint job or a wrap job on the roof ????

[KingpinRCR]

I bet the difference isn’t very big, but a wrap is easier to revert back when you’re tired of it...

OT: I would go with avery since it’s a little easier to work with. They’re both a+ quality and both have good durability, so application is imo the only difference.

[M2Rush]

Originally Posted by DONDIWHO

What is the price difference between a paint job or a wrap job on the roof ????

If you just want to do the roof and to do it properly, the difference is huge. Paint will prob run you $300-$600 vs vinyl about $80 for the material if you're planning to do yourself(5' x 6'/30 sq feet sheet) can't help on the labor cost part.

[M2Rush]

I'm not sure about 3M or Avery but I've only heard good things about Vivid.

[Tribalpinoy911]

The easiest is viviid wraps. Easier to handle easiest to conform. Avery and hexiis are some of the more difficult products to use.

[ilyabarankevich]

+1 for Vvivid+ Im looking to do the same. I decided to get VVivid+ and order either a black or CF fin from some china site or get an unpainted replacement from the dealer.

[Sea-Tac]

Wrap it. You can always remove it later should you decide to repaint. 3M I hear is easier to work with.

[DrifterX]

I've used VViViD for a bunch of parts including my M Performance parts - great price as they're local (Montreal), good quality, really durable as it has yet to chip on my front lip with all the hwy driving I do and the material is fairly forgiving to work with for someone new to it.