01-25-2020, 06:36 AM | #1 |
Private
2
Rep 56
Posts |
Restore ID6 to original after USB coding?
Hi there,
Recently I purchased RTTI through USB coding, which wasn't working in the end because it actually was the activation of TMC which I already had active in my 2018 F31...stupid I know. After USB coding the ConnectedDrive Store in iDrive wasn't accessible anymore but that couldn't bother me enough...everything else kept working fine. Recently I upgraded my base stereo system with Focal speakers and wanted to code HU_NBT from base to hifi with Bimmercode. Since the USB thing Bimmercode shows an error when reading HU_NBT How can I basically reset or restore my ID6 to factory or do I need to ask the dealer? Thanks! |
01-25-2020, 08:50 AM | #2 |
Colonel
588
Rep 2,302
Posts |
You can ask your dealer, but i'm not sure if he knows how to restore the HU.
I think he will update the software from the whole car which will also restore the HU_NBT. But you can also buy an enet cable (cheap), get the E-Sys software (free) and do it yourself. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|