12-05-2014, 06:36 AM | #23 |
Lieutenant
108
Rep 524
Posts |
Thanks for the info, so if I understand it correctly, either the dealer has to update the KOMBI or I have to change the build date and flash the firmware, in order to change the istep to something 54 or higher, right?
|
Appreciate
0
|
12-05-2014, 11:47 AM | #24 |
Second Lieutenant
56
Rep 286
Posts |
You can update or the dealer. You don't have to change the build date. I used my factory FA (0312) and flashed all the modules. I'm not sure if just flashing the Kombi is enough, I haven't tried it. But I would recommend flashing all the modules if you are going to flash it.
It took me about 20-30min to flash all the modules besides the NBT. As I have a retrofitted NBT with different build date. I usually flash NBT/Trouch Controller and then using my factory FA flash rest of the car so SVT gets updated properly on VCM. To flash Load your FA under Tal-Calculation menu. Read SVT_Actual. Activate your FA Complete flash Select ISTEP shipment for your build calculate.. Then calculate TAL Then you are good. Then follow the proper flashing procedure. Use minimum 25AMP charger. I know it's recommended to use 70AMP, but I have flashed a few cars using my 25AMP one. |
Appreciate
0
|
12-05-2014, 11:53 AM | #25 | |
Lieutenant
108
Rep 524
Posts |
Quote:
|
|
Appreciate
0
|
01-07-2015, 02:35 PM | #26 |
Enlisted Member
12
Rep 33
Posts |
I am updated to the latest integration level on my 14 F32, but my clock is still centered between the tach and speedo. It seems like only the newer 15s have the clock in the bottom right corner. I'm going to play with KOMBI tomorrow and try to figure this out.
|
Appreciate
0
|
01-07-2015, 06:28 PM | #27 |
General
10445
Rep 40,789
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Try VO Coding Kombi using a 2015 Build Date.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
01-08-2015, 11:20 AM | #28 |
Lieutenant
108
Rep 524
Posts |
|
Appreciate
0
|
01-08-2015, 11:26 AM | #29 |
General
10445
Rep 40,789
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
VO Date cannot be random. For F30 MY 2015, use 1114 as date.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
01-14-2015, 04:32 PM | #30 |
Lieutenant Colonel
630
Rep 1,649
Posts |
hold on, we can code in the function so I can (permanently?) set my steering to sport and leave the throttle mapping as comfort? If so I will so happy.
|
Appreciate
0
|
01-15-2015, 04:46 PM | #31 |
Lieutenant
108
Rep 524
Posts |
Were you successful in moving the clock to the lower right?
|
Appreciate
0
|
01-16-2015, 08:54 AM | #32 | |
Lieutenant Colonel
158
Rep 1,573
Posts |
Quote:
however you cant program it to start in sport mode everytime you start the car
__________________
2015i Cadillac Escalade ESV
|
|
Appreciate
0
|
01-17-2015, 10:52 AM | #33 | ||
Lieutenant Colonel
630
Rep 1,649
Posts |
Quote:
|
||
Appreciate
0
|
01-20-2015, 04:59 PM | #34 |
Lieutenant
108
Rep 524
Posts |
updated Kombi with extended cluster but still no icon
Finally successfully updated the KOMBI firmware with 54.2 but still no heated steering wheel icon. I do have the extended cluster. I don't want to change the build date to 1114 since I was told that with the CIC, the dash nav directions will get messed up with the resolution and what not. Does any other module need to be updated as well? Just did the Kombi, out of fear, I might brick something. Also had a cow when I got the SOS malfunction light after the flash, but it finally went away after two starts of the engine.
Also changed the build date to 1114 but did not move the clock to the lower right either. Last edited by hsk1610; 01-20-2015 at 07:19 PM.. |
Appreciate
0
|
01-20-2015, 08:16 PM | #35 | |
Lieutenant Colonel
158
Rep 1,573
Posts |
Quote:
__________________
2015i Cadillac Escalade ESV
|
|
Appreciate
0
|
01-20-2015, 10:02 PM | #36 | |
Lieutenant
108
Rep 524
Posts |
Quote:
|
|
Appreciate
0
|
01-21-2015, 06:29 AM | #37 | ||
Enlisted Member
12
Rep 46
Posts |
Quote:
|
||
Appreciate
0
|
01-21-2015, 08:57 AM | #38 | |
Lieutenant Colonel
158
Rep 1,573
Posts |
Quote:
Maybe you should update one module at a time until it works? I mean, only if you're really bored and really want it haha
__________________
2015i Cadillac Escalade ESV
|
|
Appreciate
0
|
01-21-2015, 04:34 PM | #39 |
Lieutenant
108
Rep 524
Posts |
I'll retry flashing the KoMBI, since supposedly with the new PSDZdata, the m_performanance logo should display m550 but mine still shows M_performance. And then go from there to the FEM_Body and so on...
|
Appreciate
0
|
01-22-2015, 07:06 PM | #40 |
Lieutenant
108
Rep 524
Posts |
Updating the FEM_Body to the latest finally made the heated steering display on the dash to show up. But gave up trying to move the clock to the lower right. LOL.
|
Appreciate
0
|
01-26-2015, 04:28 PM | #41 |
Enlisted Member
12
Rep 33
Posts |
|
Appreciate
0
|
01-26-2015, 04:29 PM | #42 | |
General
10445
Rep 40,789
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
Charger is needed for Flashing not Coding.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
01-26-2015, 04:31 PM | #43 |
Enlisted Member
12
Rep 33
Posts |
|
Appreciate
0
|
02-01-2015, 12:12 PM | #44 |
Major General
2810
Rep 5,316
Posts
Drives: G80 M3 6MT
Join Date: Mar 2014
Location: Long Island, NY
|
If you are on the new I-Level and you VO Code the KOMBI with an 0714 build date the clock will move. I just did it.
__________________
Scott, Partner
Insight Automotive Consulting Click HERE for all discounted BMW New Car Pricing Click HERE for all BMW In Stock Inventory Specials Call/Text: 516-416-5481 Email: scott@insightautoconsulting.com |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|