[blackabass]

Hi,

I have an NBT EVO HU with ID6 in my F30, No GPS so uses an ATM Emulator.
Started the car on a frosty cold morning just after heavy snow has melted and realized the display was BLANK. All worked fine the night before so
Heating + climate control works ok, 6WB cluster works fine.

Steps tried so far still no luck

- Checked all fuses in the car and all is good none blown.
- Removed HU and tested both OEM and retrofit harness and confirmed there is power into the HU
- Confirm ATM Emulator powers from the same harness as I can see the led light.
- Disconnected ATM Emulator and connected just HU to the car

I tested the HU on a workbench with one of the Bimmer Pros and confirmed HU works fine so likely an issue with my car somewhere but can't trace it.
Could be no signal from the CANBUS as advised but not sure how to check or confirm this.

Has anyone had a similar issue or can advise what next to check or try to narrow down the issue and or fix?

Look forward to your help.


Cheers

[fe7565]

Did you solve this?