[atzebmw]

Originally Posted by jalami

I got it.
I encode with donor VIN or my VIN?

Try to code with donor VIN.

[jalami]

solved all right....
https://ibb.co/gx4g2p.
coded with all donor VIN FA..

I think the key is in code type.

https://ibb.co/gDkM2p


Now.
I do not have sound. I have alpine.hifi.(retrofit).
usb does not work.
the navigation asks me to enter usb and code for activation.

[jalami]

https://ibb.co/mGaqTU
ATM emulator.
I have removed, I have put it pin 13 of nbt evo.sigo without having sound.

I do not understand the wire scheme well 13

[atzebmw]

The emulator needs to be reinstalled.
Otherwise, you have no navigation and there is always the question for the activation code.

Then I would change piece by piece the VO to your VO and code.
After each coding check if everything is still working.
If something is not working anymore, undo the last change.

I would start to change "Entwicklungsbaureihe F036 to F030".
Then coding and check.
Zeitkriterium i would leave at 0716.
After that delete "21W", code and check.
And so on...

[jalami]

Ok.ok. I keep you informed...😁

[jalami]

everything coded .. perfect. 0 error

No sound. I think the problem is the wire 13 of the emulator ATM.
navigation remains the same..
we are advancing.

[atzebmw]

I think emulator is not working.

And yes, wire 13 could be the reason.

Did you not reconnect the emulator like it was before?

The wire 13 (Rad_On) is responsible for turning on the amplifier of your hifi-system and like i see on the wiring diagram also for turning on the emulator.

[jalami]

nothing does not work .he tried to remove and place on pin 13. it does not work .
I have the kit alpine.sound.(retrofit)

[atzebmw]

Something i still don't understand.
When you started this thread, you wrote "all worked perfectly".
So the emulator was also working perfectly?

I just found the installation manual for this emulator.
There is written that there are 2 indicators (beside the blue GPS connector).
Do the indicators show something?

And then i looked again at wire 13 (Rad_On).
In the installation manual is written that the Rad_On coming from the emulator is an Output.
So it may not be connected with Pin 13 of the HU because Pin 13 is also an output.
The Pin 14 from the emulator (white/red) replaces the output from Pin 13 from the HU.

Was there a wire connected on Pin 13 (A42*1B HU)?
If yes, then this wire has to be connected with Pin 14 of the emulator.

[jalami]

everything works less sound.
after solving the black screen, the navigation is not activated.asks me you to enter in usb map and activation code.😪.
I have busy pin 13 of evo. I have removed it and connected to pin 14 of ATM Emulator. (It does not work).
I have alpine sound retrofit (I'm looking if yes the pin 13 of EVO)as amplifier activator

[jalami]

the indicators next to gps are flashing

[jalami]

https://ibb.co/mVR8JU
Pin13 nbt evo 2 wires blue (alpine sound wiring)
Pin 14 ATM emulador


The car's original wiring position 13 is empty.

[jalami]

Resolved navigation. after coding. all the fsc were lost.
request fsc of recovery. and problem solved.
I continue to struggle with sound.
I have been able to locate a small summary of the installation.
https://ibb.co/kEqmkK

[atzebmw]

Here you have the complete installation instruction.
Maybe you can check the fuse for the amplifier or even if power arrives the amp.

[jalami]

Thanks atzebmw.👍

[jalami]

I already have sound. Ufff.😪 (.I need to restart sound amplifier to make it work)

I have another problem..
the hu nbt evo. It is touch, but when I codify, I do not get
After coding, i coded FDL..the values ​​from display to touch ,nothing. I code to 0717. If I get it to be tactile but it looks bad.

The date of manufacture NBT EVO donor is 2017/08. F36. .my car f30

[atzebmw]

Originally Posted by jalami

I already have sound. Ufff.😪 (.I need to restart sound amplifier to make it work)

I have another problem..
the hu nbt evo. It is tactile, but when I codify, I do not get
After coding, i coded FDL..the values ​​from display to touch ,nothing. I code to 0717. If I get it to be tactile but it looks bad.

The date of manufacture NBT EVO donor is 2017/08. F36. .my car f30

I'm sorry.
But i don't understand the word "tactile".
Also when i use google translator it makes no sense.

[jalami]

Touch screen

[Almaretto]

You have 5AC, but not 524?

How come FA does not have any sound system SA's (eg 676)?

[jalami]

I have xenon. option 522

5AC retrofit 5AS

I have Hifi alpine sound (retrofit). code in HO.

[jalami]

Hi all
I think that mine has no solution..
black screen again.
I have coded Fdl.; Hmi-id version. ID6.
to see if I got a touch screen since my screen is touch
I create a new FA again. (same as donor Vin)the 2 errors appear again ..