10-22-2014, 09:22 AM | #1 |
Major
658
Rep 1,479
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
CAFD Coding Error
Hi,
Finally got camera control module, TRSV, connected; neither the camera switch nor the iDrive screen icon, however, will activate either the rear or side cameras. I, therfore, thought that I had to inject CAFD into this ECU. So I went on about injecting CAFD as per Shawn Sheridan's super instructions and when it came time to select CAFD, I selected the most current one listed, associated with F020-14-503. When I got all done, I got two errors: cdDeploy ProcessedWithErrors cafd_0000223-013_009_007 NotExecutable Here's my I-Step levels:
I am using E-Sys version 3.24.3 & PszDdata version 53.4 lite What do I have to do to correct this error? Most importantly, what are my next steps? Appreciate any help or thoughts
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
10-22-2014, 09:58 AM | #2 |
Lieutenant Colonel
158
Rep 1,573
Posts |
if i remember correctly.......i think you need the FULL version to inject a CAFD. Lite version is only for coding a CAFD that already exists.
I may be wrong on this.
__________________
2015i Cadillac Escalade ESV
|
Appreciate
0
|
10-22-2014, 10:53 AM | #4 |
Major
658
Rep 1,479
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
I have been using the PszDdata lite version; ShawnSheridan suggested that the only instance when you need the full version is for flashing an ECU.
As I continue to scratch my head and dig into this further, I ran into something odd. Using Token Master's CAFD/NCD tool (Terrific tool, by the way!), I got all of the specific coding items that the three options (508 for both PDCs, 3AG for rear camera & 5DK for side cameras) I added to my VO would affect. I then compared the post-VO-coded NCD files of the three affected modules (ICM, HU_NBT & REM) with the list I got from the tool. All items were an exact match except for the following: HU_NBT > ExBox 3001 > TRSVC. This item was VO-coded in the car as 41, but the list showed it as 81 (and I even tried for each of the two camera options separately and then all). Could this be the cause of my problem as I have no way of figuring out what these values represent?? Very much appreciate any help or counsel
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|