11-21-2017, 04:04 PM | #881 |
Major
934
Rep 1,436
Posts |
Mine is actually a 2016 LCI but with ID4. The car I'm trying to code is a mate's which is also a 2016 model (4 coupe) but has ID5.
__________________
Gone: G05 X5 40d M Sport, F15 X5 30d M Sport, F30 330d xDrive, F21 M135i, E87 123d
|
Appreciate
0
|
11-21-2017, 04:22 PM | #882 | |
Major
934
Rep 1,436
Posts |
Quote:
1. Run E-sys Launcher 2. Once E-sys open, click on connection icon and select 'F020' not DIRECT 3. Connection establishes successfully. 4. In 'Coding' tab click on 'Read' then save down the file before clicking 'Edit'. 5. This opens the 'FA editor' tab. 6. Right-click 'FA' and then select 'Calculate FP' 7. Once vehicle profile populates on right hand side, I click down through 'FZAuftrag' to get to 'SALAPA element'. 8. In the bottom left box where the 3-digit VO codes appear, I edit 6NH to 6NS and then click 'Apply changes'. 9. I then click 'Calculate FP' again, and no error appears so I save the file. 10. I follow the optional steps by going into 'Expert Mode' and then 'VCM'. 11. Once in there I load the VO profile and again click 'Calculate FP'. I then go to the 'VCM master' box and click 'Write FA FP'. 12. I then click the 'Coding' tab and a pop-up appears asking me if I want re-load my data file in module 'Coding'. I click 'Yes'. 13. Once in the coding tab, I click 'Activate FA' (checking that the changes i.e. 6NW have pulled through) and then I click 'Read SVT'. 14. Once the SVT box populates, I scroll down to NBT2 and right-click and say 'Code' (taking care not to click the CAFD this time!!). 15. Once I click code, the script runs and iDrive reboots. The coding finishes showing no errors and I disconnect. 16. At this point, office etc becomes available when pairing new devices but telephone 2 does not appear (like it does in your screenshot above). I can't see where I've gone wrong and have been back through this thread and the coding guide included with E-sys. The same method seemed to work for me on my own car with ID4
__________________
Gone: G05 X5 40d M Sport, F15 X5 30d M Sport, F30 330d xDrive, F21 M135i, E87 123d
|
|
Appreciate
0
|
11-21-2017, 04:55 PM | #883 | |
Major
451
Rep 1,201
Posts |
Quote:
After I change the FA from 6NH to 6NS, I push the little button that looks like a open door next to the SALAP box and then press the SAVE symbol (disk button at the Top). Go back to expert mode and click Coding Right click on FA and Activate FA Then read SVT Right click on NBT2 folder and code. You don't need to write the FA back to the car Edit: to be fair I can't see anything that stands out in your list. It all looks good Last edited by stu14t; 11-21-2017 at 05:40 PM.. |
|
Appreciate
1
KCH1984933.50 |
11-25-2017, 04:24 PM | #884 |
Colonel
505
Rep 2,152
Posts |
has anyone coded ebt to a business nav car?? is it do able?
__________________
Current: BMW M4 F83 - Mods : Pedal Covers, LCI Stereo facia Retrofit and Carbon Rear corner covers
Old: F32 435d M Sport - Mods : HR Sport Springs, 20" Veemann V-FS23 in Gun Metal, M Performance Body Kit, Pedal Covers, Eurspec CF Mirror Caps, More-BHP remap 364 BHP 741 NM, M4 Under Chassis Brace, 15mm Rear ARB, 8.8" Screen Retrofit and LCI Stereo facia Retrofit |
Appreciate
0
|
11-27-2017, 12:15 PM | #886 | |
General
10339
Rep 40,296
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
1
Ajs_435d354.50 |
11-27-2017, 12:28 PM | #887 | |
Lieutenant Colonel
355
Rep 1,846
Posts |
Quote:
|
|
Appreciate
0
|
11-27-2017, 02:32 PM | #888 |
Major
934
Rep 1,436
Posts |
I coded it to my mates 1 series with Bus Nav...which is what annoys the f**k out of me that I can't seem to get it to work on a newer ID5 car
The 1 series also has the older system where you also need to code the second module as described by Teaston on the first page of this thread.
__________________
Gone: G05 X5 40d M Sport, F15 X5 30d M Sport, F30 330d xDrive, F21 M135i, E87 123d
|
Appreciate
0
|
11-27-2017, 03:58 PM | #889 | |
Private
17
Rep 60
Posts |
Quote:
I take my car into the dealers for an update and the nice lady at BMW asked me if I had coded the car with EBT... #awks I take it this was because I incorrectly wrote the FA back to the car ? I’m pretty sure I went through to step 10. In the which case should I have stopped at step 7, then completed the steps above in green to code from the locally stored file? Therefore step 9 ‘write FA FP’ would have been the point I accidentally and permanently changed the factory config on the car...? i.e. the point above in red ? Therefore the next time I would have read the FAlist SALAPA-element, it would still read 6NH, despite having EBT enabled? Thanks for educating |
|
Appreciate
1
stu14t450.50 |
11-27-2017, 04:05 PM | #890 | |
Banned
10991
Rep 32,881
Posts |
Quote:
|
|
Appreciate
0
|
11-27-2017, 04:51 PM | #891 |
Major
451
Rep 1,201
Posts |
Where are you in Glasgow? I'm over in at the Hilton at Bellshill on Thursday. Should be done about 3pm (ish). Could have a look for you. Fresh pair of eyes and all that.
__________________
Current - 2021 G20 330i M Sport+
Gone - 2017 F30 335d M Sport + in San Marino Blue Gone - 2015 F30 LCI 320d M Sport+ Step Auto Gone - 2012 F30 320 ED Gone - 2011 E87 118d |
Appreciate
0
|
11-28-2017, 03:14 AM | #892 |
Major
934
Rep 1,436
Posts |
|
Appreciate
0
|
11-29-2017, 05:57 PM | #893 | ||
Captain
624
Rep 958
Posts
Drives: 2016 F36 435x MSport
Join Date: Oct 2017
Location: Hartford, CT
|
Quote:
I have a 2016 F36 All it does is enable Office. No telephone 2 shown Quote:
I loaded up my base FA, and re-wrote it back to the car. Then tried the steps you outlned. Looks like it still writes it to the car, because i tried doing a FA Read and it came back with 6NS instead of 6NH ----- EDIT: Nevermind ... missed a step when i installed esys to prevent the FA from writing each time you do an FDL On E-Sys Menu Bar, select "Options" and then "Settings" and on the "OPTIONS" Tab Uncheck the boxes for "Update VCM after TAL execution" and "Update MSM after TAL execution". __________ Last edited by paimon.soror; 11-29-2017 at 06:41 PM.. |
||
Appreciate
0
|
11-29-2017, 07:53 PM | #894 | ||
Captain
624
Rep 958
Posts
Drives: 2016 F36 435x MSport
Join Date: Oct 2017
Location: Hartford, CT
|
Quote:
Quote:
I haven't tried it for myself yet, but sounds like this work for some NBT2 folks (mine is NBT2) ------ EDIT: Boom! that worked for me! Only catch is that after you do this, go to the settings, and then bluetooth settings, and enable Bluetooth for office and Telephone 2. Only thing i am missing right now is Album art when i play music through spotify, but not sure if thats just a limitation of Android ? Ill have to see if the wife's iphone shows album art Last edited by paimon.soror; 11-29-2017 at 08:37 PM.. |
||
Appreciate
0
|
11-30-2017, 02:10 AM | #895 | |
Major
451
Rep 1,201
Posts |
Quote:
HU_NBT_EVO > AUDIO_TUNER_TRAFFIC 3002 > AUDIO_OFFSET = aktiv HU_NBT_EVO > AUDIO_TUNER_TRAFFIC 3002 > DAB_JOURNALINE = nicht_aktiv [Default] HU_NBT_EVO > AUDIO_TUNER_TRAFFIC 3002 > MICROPHONE_NUMBER = wert_2 HU_NBT_EVO > EXBOX 3001 > USB_AVAILABLE = aktiv HU_NBT_EVO > HMI 3000 > CDMM_USB_PORTS = usb1_sia HU_NBT_EVO > HMI 3000 > OFFICE_MENUS_ACTIVE = aktiv HU_NBT_EVO > SYSTEM_EINSTELLUNGEN 3004 > SOFTWARE_UPDATE_ASSISTANT = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > ADRESSBOOK = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > API_CAR_TYPE_IPOD_LOGO = bmw HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > API_MP4_ON_OFF = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > API_MSD_EIN_AUS = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > API_USB_VIDEO = none [Default] HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > AUDIO_NOTES_EIN_AUS = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > AUDIO_PLAYER_ON_OFF = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > BLUETOOTH_2ND_HFP = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > BT_MODUL_ON_OFF = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > CALENDAR_EIN_AUS = nicht_aktiv [Default] HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > CE_DEVICE_SPEECH_RECOGNITION = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > CONTACT_BOOK_PICTURES = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > CONTACTS_EIN_AUS = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > EMAIL_EIN_AUS = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > ENT_BTAS_METADATA = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > MACRO_PIM = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_CONFERENCE_CALL = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_OBJPUSH_MENUE = nicht_aktiv [Default] HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_RESPONSE_HOLD = nicht_aktiv [Default] HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_TYPE = internal_phone HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PIM_BILDER_EIN_AUS = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_AUDIO_NOTE = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_EMAIL = nicht_aktiv [Default] HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_SMS = nicht_aktiv [Default] HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_VOICE_EMAIL = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > REMINDER_EIN_AUS = nicht_aktiv [Default] HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > SINGLE_OR_MULTILINK = multilink HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > SMS_EIN_AUS = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > SWUP_SOURCE_USBMSCDD = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > TASK_EIN_AUS = nicht_aktiv [Default] HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > TEXT_NOTES_EIN_AUS = nicht_aktiv [Default] HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > TWO_PHONES_PARALLEL = aktiv HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > WLAN_DIAGNOSE = nicht_aktiv [Default] Yes, the key is the "Settings". These, sort of, cover your steps when you code. There should be no obvious (to dealers at least) footprints. It's the update VCM that stops this for the FA. "Update MSM after TAL execution" I think i read somewhere is an update to some security database and may be needed for some things. Maybe a question for vorph and or shawnsheridan
__________________
Current - 2021 G20 330i M Sport+
Gone - 2017 F30 335d M Sport + in San Marino Blue Gone - 2015 F30 LCI 320d M Sport+ Step Auto Gone - 2012 F30 320 ED Gone - 2011 E87 118d Last edited by stu14t; 11-30-2017 at 02:42 AM.. |
|
Appreciate
0
|
12-12-2017, 07:34 AM | #896 |
Registered
0
Rep 4
Posts |
I have 2014 3 series Modern spec.
I have 6NH, with business nav and BMW assist. A while ago I had a local garage attempt some changes for me. I now get BT streaming from iPhone, text messages come through on office but no emails. I don't see album art and the voice assist button doesn't work. Is my head unit and equipment limiting the features I have or would coding with Esys give me better functionality. I am new to this, so go easy on me. Thanks |
Appreciate
0
|
12-12-2017, 07:49 AM | #897 | |
Banned
10991
Rep 32,881
Posts |
Quote:
|
|
Appreciate
1
apdubb0.00 |
12-12-2017, 12:11 PM | #898 | |
Registered
0
Rep 4
Posts |
Quote:
|
|
Appreciate
0
|
12-12-2017, 02:35 PM | #899 | |
Private
13
Rep 67
Posts |
Quote:
I also retrofitted Touch controller and complete surround view, fully working on Entrynav. |
|
Appreciate
1
apdubb0.00 |
12-12-2017, 02:40 PM | #900 | |
Banned
10991
Rep 32,881
Posts |
Quote:
|
|
Appreciate
0
|
12-12-2017, 03:36 PM | #901 |
Private
13
Rep 67
Posts |
I did full system, including bumper cameras, finding parts on the net, with patience, comes something around 1200-1300 euro. I did the install and coding myself in following steps for a total of 7-8 working days.
|
Appreciate
0
|
12-13-2017, 04:09 AM | #902 |
Registered
0
Rep 4
Posts |
Thanks for the replies. I'm not savvy enough to do any mods. They do sound good though.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|