07-12-2015, 04:56 AM | #1 |
Lieutenant
418
Rep 503
Posts |
Extended Instrument Cluster F30 - Code to White instead of Orange
Hi Guys
ive tried to code my F30 335i to the following setting in KOMBI so that my extended display is white all the time, as i dont particularly like that bit in orange at night, but with no luck. The change i have made is as follows: ECU = KOMBI -->3007 KI_Dimmung, DIM_NACHT_EIN-->Werte=FF (original Werte value was 08). It seems to work for 1-2 seconds on reboot but then goes back to orange (this is when the car is in the garage so its simulating night time). Any ideas on what i might be missing? Have coded heaps of other stuff, its just this one thats got me scratching my head? Thanks Harry |
07-13-2015, 08:07 AM | #2 |
Lieutenant
329
Rep 532
Posts |
this i found on a different forum, i don,t know if it helps ,,
KOMBI L7_BASIS > KI_Dimmung 3007 > DIM_NACHT_AUS = aktiv KOMBI L7_BASIS > KI_Dimmung 3007 > DIM_NACHT_EIN = aktiv KOMBI L7_BASIS > KI_Dimmung 3007 > DIM_RLS_NACHT_AUS = mit_rls KOMBI L7_BASIS > KI_Dimmung 3007 > DIM_RLS_NACHT_EIN = mit_rls |
Appreciate
0
|
05-25-2016, 10:28 AM | #3 | |
Enlisted Member
18
Rep 39
Posts |
Quote:
anyone tried ? is this work ? |
|
Appreciate
0
|
04-03-2017, 10:09 AM | #6 | |
Banned
114
Rep 469
Posts |
Quote:
|
|
Appreciate
0
|
04-04-2017, 02:43 AM | #7 |
Private
41
Rep 72
Posts |
|
Appreciate
1
Lamora011531.50 |
04-07-2017, 04:38 PM | #9 |
Banned
114
Rep 469
Posts |
|
Appreciate
0
|
04-07-2017, 05:24 PM | #11 |
Banned
114
Rep 469
Posts |
What coding do I use from the above listed OP code or later described code by someone else ?
|
Appreciate
0
|
06-01-2020, 02:03 PM | #12 |
New Member
2
Rep 7
Posts |
I’ve been going back and forth trying this on my 2012 F30 320d with extended display on instrumental cluster.....i'm not winning.
Last edited by TAL007; 06-01-2020 at 02:04 PM.. Reason: Spelling error |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|