[shawnsheridan]

Originally Posted by nortin

Thanx Shawn,
But I succeeded other module e.g. FEM_Body,HU_NBT...
Any issue?

That means nothing. Incorrect Connection Parameters can be successful for some ECU and not others.

[nortin]

Originally Posted by shawnsheridan

That means nothing. Incorrect Connection Parameters can be successful for some ECU and not others.

OK, I will try again next time. Thank you for your quick reply

[nortin]

Finally, I did it!
I changed "cafd_000009c8-006_000_030" to "***031", Then all error was gone.
Then I replaced retrofit kit for Cruise Control, That's why KOMBI needs no errors.

Thank you for all guys in this website!!!

[shawnsheridan]

Originally Posted by mflorizi

Shawn
Could help me to enable internet with the car in motion?

I only know what it took to get it working in my car, and I have posted in great detail on that here:

http://www.bimmerfest.com/forums/sho...6&postcount=70

[shawnsheridan]

Originally Posted by mflorizi

My module is HU_NBT the procedure is the same HU_CIC?

No. NBT is different due to it's integrated Combox.

See here:

http://www.bimmerfest.com/forums/sho...9&postcount=52

[favourhisashi]

Hi Shawn,

Can you send me a link to newest version of psdzdata?

Thank You!

[shawnsheridan]

Originally Posted by favourhisashi

Hi Shawn,

Can you send me a link to newest version of psdzdata?

Thank You!

PM sent.

[thehobbit]

Hi all,
two days ago I made my first connection to my car, everything was fine, I have successfully read some data.
Today I try to connect again, but the check "Connect by VIN" is grayed (but selected), and if I try to push connect button, E-Sys give me a G013 error.
What can I check?
Thanks!

[shawnsheridan]

Originally Posted by thehobbit

Hi all,
two days ago I made my first connection to my car, everything was fine, I have successfully read some data.
Today I try to connect again, but the check "Connect by VIN" is grayed (but selected), and if I try to push connect button, E-Sys give me a G013 error.
What can I check?
Thanks!

Turn car completely off, and try again in 30 minutes.

[thehobbit]

Originally Posted by shawnsheridan

Turn car completely off, and try again in 30 minutes.

Thanks shawnsheridan, tried again after my last try, about 1h, and connection was successfully.
Is there any reason for that? Anyway, thanks again for your support!

[shawnsheridan]

Originally Posted by thehobbit

Thanks shawnsheridan, tried again after my last try, about 1h, and connection was successfully.
Is there any reason for that? Anyway, thanks again for your support!

IP Port on Gateway module gets jammed up and needs time to reset.

[KevinLevin]

Hi Shawn, please could you send me a PM with the link for the E-SYS software plans token for a 2014 F32?

Thanks buddy!

[shawnsheridan]

Originally Posted by S5Mafia

Hi Shawn, please could you send me a PM with the link for the E-SYS software plans token for a 2014 F32?

Thanks buddy!

PM sent.

[shawnsheridan]

Originally Posted by franciscogottardi

Hi Shawn,

Can I please have a link to the E-Sys software and what ever else is needed for coding my F30 320i 2014 please, Thanks!

PM sent.

[pej7445]

Originally Posted by shawnsheridan

PM sent.

Ditto. Looking to code my 2103 f35 (328i)

[shawnsheridan]

Originally Posted by pej7445

Ditto. Looking to code my 2103 f35 (328i)

2103?

PM sent.

[fazooley]

Originally Posted by shawnsheridan

2103?

PM sent.

Hey shawn, what do you need to update to get the SDARS logos. Thats the one thing i really miss from my mercedes lol

Thanks
Frankie

[shawnsheridan]

Originally Posted by fazooley

Hey shawn, what do you need to update to get the SDARS logos. Thats the one thing i really miss from my mercedes lol

Thanks
Frankie

You need NBT with at least 50.4 firmware and:

HU_NBT => SDARS_ALBUM_ART = aktiv

[BimmerNo5]

I'm trying to follow the instructions for "How to change FA in F-series car". Connection no problem, but after I read the FA, there is no "Edit" button just above the FAList. So I get to step 3 but I can't go any further. Is this because you can no longer do this in recent F series cars? Or is it because I am using the Lite PSDZData files? Or something else??
Thanks if anyone can help.

[Frogman]

Originally Posted by BimmerNo5

I'm trying to follow the instructions for "How to change FA in F-series car". Connection no problem, but after I read the FA, there is no "Edit" button just above the FAList. So I get to step 3 but I can't go any further. Is this because you can no longer do this in recent F series cars? Or is it because I am using the Lite PSDZData files? Or something else??
Thanks if anyone can help.

You have to click the Save button (and save the FA to a file) before the Edit button is enabled.

It has nothing to do with the lite version of the data files.

[Stichel]

Any possibility on getting software to code my early 2013 F31 330D (European)? Can't wait to get started

[shawnsheridan]

Originally Posted by BimmerNo5

I'm trying to follow the instructions for "How to change FA in F-series car". Connection no problem, but after I read the FA, there is no "Edit" button just above the FAList. So I get to step 3 but I can't go any further. Is this because you can no longer do this in recent F series cars? Or is it because I am using the Lite PSDZData files? Or something else??
Thanks if anyone can help.

Originally Posted by Frogman

You have to click the Save button (and save the FA to a file) before the Edit button is enabled.

It has nothing to do with the lite version of the data files.

Additional, sometimes the FA Window needs to be re-sized before the Edit button can be seen.