[brtttt]

Can anyone help me solve my loss of location on my satnav

It worked fine then one day my location was out by around 100miles yet still moved when I drove even if it was in the wrong location.

Since then it has lost total signal
No errors on display. I own bimmercode so unsure if I can find any through it.

I’ve updated my software in car
Installed 2019-maps ok
Just purchased a gps antenna to plug direct into my HU to eliminate cable or gps Fin issues.
But none of these efforts have worked.

I can manually input my location in the service menu ,
If I then input a destination is auto moves without the car moving
So as I drive it defaults back to me off the coast of Africa .

[999rigger]

Has your microphone stopped working as well? Mine did that and it needed a new control unit.

[xenon]

Well at least you can stop at The Wallace and have a pint

[brtttt]

Originally Posted by xenon

Well at least you can stop at The Wallace and have a pint

depends on what time I get back from africa , but not a bad call when all else fails hit the pub

[brtttt]

Originally Posted by 999rigger

Has your microphone stopped working as well? Mine did that and it needed a new control unit.

Don't usually use it so never really noticed but will check and if so at least I know its the control unit, so thanks for that.

Is the control unit the combox ?

[kitster]

Originally Posted by Bertz

Don't usually use it so never really noticed but will check and if so at least I know its the control unit, so thanks for that.

Is the control unit the combox ?

That looks like the telephone control unit (top right boot). I had the combox in the same location.

[brtttt]

Originally Posted by 999rigger

Has your microphone stopped working as well? Mine did that and it needed a new control unit.

Mic is still working which I suppose is good in one way but yet still clueless in another way

[brtttt]

Originally Posted by kitster

That looks like the telephone control unit (top right boot). I had the combox in the same location.

Thanks for clearing that up as I wasn’t too sure if it was the combox as it seems to be in the same location

[kitster]

Originally Posted by Bertz

Thanks for clearing that up as I wasn’t too sure if it was the combox as it seems to be in the same location

If you have the NBT, then you shouldn't have the combox as that was CIC based systems. I had one in my HU_ENTRY F31 until I disconnect it and retrofitted a NBT.

[brtttt]

Originally Posted by kitster

If you have the NBT, then you shouldn't have the combox as that was CIC based systems. I had one in my HU_ENTRY F31 until I disconnect it and retrofitted a NBT.

makes sense, I'm clueless so thanks for explaining that