03-20-2024, 09:51 PM | #1 |
New Member
2
Rep 5
Posts |
BMW F32 iStufe Update Fail ECUs no Respone (solved)
Hello from Germany
My Name is Mert and i own a F32 430d. 2 days ago i made a Software Update with Ista 4.39.20 with Psdzdata 4.39.20 and during the Update my car died because of a Power Supply failure .... (thats my fault it was too weak ). Now i got a bigger Power Supply and charged the car... and its enough for Ista and Esys Now the car starts and shifts but the Kombi, Nbt_evo and Tv_Modul are dead.. Nbt boots up and stucks on the "Flashing Time" Blue Screen but the Kombi is Lighting Up and working it only has the red dot. I tried to flash it but the ECUs are not responsing. If i read ECU instead of VCM the 3 ECUs are not in the SVT. I tried today all day to repair it. I tried injectin CAFD and i get a faulty code. Can somebody help me? |
03-21-2024, 06:07 AM | #2 |
Lieutenant
136
Rep 525
Posts |
Can be flashed with esys just diese 3 ecu. If you need help, I can
__________________
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH and IHKA3
|
Appreciate
0
|
03-22-2024, 02:49 AM | #6 |
Lieutenant
136
Rep 525
Posts |
It was little bit more complicated than just flashed. Navigation was stuck in bootloader mode so if you look with esys no responding from HU,kombi and TV module. First we get out from bootloader mode then was easier to flash ibad and swfl. You picture is wrong because blue is actual target should to be with 000 and red are update file
__________________
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH and IHKA3
|
Post Reply |
Bookmarks |
|
|