[Medal]

Little help here all would be great:

I'm looking at 10mm spacers for the front and 15mm for the rear for my winter set up of the stock 403m wheels. Can someone please tell me what size lugnuts I need to ensure I order with these spacers?

Thanks.

[AtlantaDude]

Measure your standard lugs from the beginning of the thread, and add the amount of the spacers, you'll then have your new lug length that you need. Keep in mind, you'll need to ID if your lugs have conical heads or flat heads. I believe most BMWs are conical. Hope that helps.

[Medal]

Originally Posted by Bear From Jax

Measure your standard lugs from the beginning of the thread, and add the amount of the spacers, you'll then have your new lug length that you need. Keep in mind, you'll need to ID if your lugs have conical heads or flat heads. I believe most BMWs are conical. Hope that helps.

Thanks but I'm trying to not have to do that....I'm hoping someone else here has already used these spacer sizes and can tell me what is needed. I was told 28mm for the 10mm spacers and 35mm for the 15mm spacers, can anyone confirm that?

[Medal]

can anyone help me out?

[bobblehead]

For M14 x 1.25 ... I believe the std shaft length bolt is 27mm

You can take a long at the Turner's

http://www.turnermotorsport.com/p-44...-mini-r56.aspx

Not cheap ... for 20 pieces, you are looking at about $100.

Apex is cheaper ...

http://www.apexraceparts.com/F30-BMW...M14_p_210.html


So, therefore, you are looking at about low 40mm shaft length for the front and 50mm shaft length for the rear. Or simply the vendor would most likely going to sell you the 50mm shaft length as standard extended wheel bolts to make it uniform for all wheels.

Originally Posted by Medal

can anyone help me out?

[Medal]

Originally Posted by bobblehead

For M14 x 1.25 ... I believe the std shaft length bolt is 27mm

You can take a long at the Turner's

http://www.turnermotorsport.com/p-44...-mini-r56.aspx

Not cheap ... for 20 pieces, you are looking at about $100.

Apex is cheaper ...

http://www.apexraceparts.com/F30-BMW...M14_p_210.html


So, therefore, you are looking at about low 40mm shaft length for the front and 50mm shaft length for the rear. Or simply the vendor would most likely going to sell you the 50mm shaft length as standard extended wheel bolts to make it uniform for all wheels.

Ok thanks bro, I'll just give turner a call since they are in my back yard. I really appreciate it!

[bobblehead]

glad to help in any way.

Originally Posted by Medal

Ok thanks bro, I'll just give turner a call since they are in my back yard. I really appreciate it!