[david51]

Here is a complete TUTO to mount new full LED taillights for BMW F30 /M3F80

For BMW F31 is the same, there is just the exterior lights that are different

Left outer side taillights (63217372209)
Outer side right taillights (63217372210)
bmw see if gutters are 2 to change

[BUY]
Here are the reference pictures and pieces to buy



Outside left side taillights (63217369117)
Right side outside rear lights (63217369118)
Left inner taillights (63217369119)
Inside right rear lights (63217369120)





Cache left gutter (51497410819)
Cache right channel (51497410820)


Case 2x socket interior lights (61136984758)



2x connector for indoor lights (61138364834)



And cables to power the internal fires right and left towards the box next to the battery


[REMOVAL]
Removing hinge filling:





Removing side trim battery:




Removing Tailgate trim and fires:











[CHANGE] Before making the changes you must unplug the battery +

Here the change to External lights on right and left

there is just a move son as indicated with the homing

Left light:

Black / white to No. 1
Black / yellow to No. 2
Brown to No. 3
Gray / purple to No. 4


Right light:

Black / Gray to No. 1
Black / blue to No. 2
Brown to No. 3
Gray / yellow to No. 4



this photo shows the original location plug as above






Now he'll have to take that leave 2 son of internal fires left and right side to the rear case REM located next to the battery

This manipulation was used to transplant on foreign flashing


Right socket box:

Son connect purple / gray location 1 to REM(A174)prise(A174*14B)black / gray location No. 12


Left socket box:

son connect the blue / red location 1 to REM (A174)prise(A174*12B) black / white location No. 17





Photo of the socket located on the rear casing
















Here the change to the interior lights left and right with the new outlet box (61136984758)

2 connectors that will connect to the rear module, the other 8 are the original ones that must be removed from the old black jack (4-pin) to the new green connector (6 pin with 1 not used)

Left light:
connector and cable add
son blue / red slot No. 1 to the REM box (A174) taken (A174 * 12B) black / white location No. 17


connector has moved from the original black jack (4-pin) to the new green jack (6-pin)
black / purple to No. 6
Brown to No. 3
Yellow / black to No. 4
Green / yellow to No. 5



Right light:
connector and cable add
son purple / gray location # 1 to the REM box (A174) taken (A174 * 14B) black / gray location No. 12


connector has moved from the original black jack (4-pin) to the new green jack (6-pin)
Green / red to No. 5
Brown to No. 3
Yellow / purple to No. 4
Black / blue to No. 6







[CODING]

The coding of new fires is not required, since there is no error on the idrive but against there will flicker flashing at each startup

If like me you do not want flickering lights here is the mod has to do with the E-sys software

Flashing Rear:

REM 3061 FRA_H_L_KALTUEBERWACHUNG /nicht_aktiv
REM 3061 FRA_H_L_WARMUEBERWACHUNG /nicht_aktiv
REM 3061 FRA_H_L_IS_LED /aktiv
REM 3061 FRA_H_R_KALTUEBERWACHUNG /nicht_aktiv
REM 3061 FRA_H_R_WARMUEBERWACHUNG /nicht_aktiv
REM 3061 FRA_H_R_IS_LED /aktiv

Reverse lights:

REM 3061 RFS_L_KALTUEBERWACHUNG /nicht_aktiv
REM 3061 RFS_L_WARMUEBERWACHUNG /nicht_aktiv
REM 3061 RFS_L_IS_LED /aktiv
REM 3061 RFS_R_KALTUEBERWACHUNG /nicht_aktiv
REM 3061 RFS_R_WARMUEBERWACHUNG /nicht_aktiv
REM 3061 RFS_R_IS_LED /aktiv

Brake lights outside:

REM / 3061 / BL_L_KALTUEBERWACHUNG /nicht_aktiv
REM / 3061 / BL_L_WARMUEBERWACHUNG /nicht_aktiv
REM / 3061 / BL_L_IS_LED /aktiv
REM / 3061 / BL_R_KALTUEBERWACHUNG /nicht_aktiv
REM / 3061 / BL_R_WARMUEBERWACHUNG /nicht_aktiv
REM / 3061 / BL_R_IS_LED /aktiv


Interior Brake lights:

REM / 3061 / BFD_L_KALTUEBERWACHUNG /nicht_aktiv
REM / 3061 / BFD_L_WARMUEBERWACHUNG /nicht_aktiv
REM / 3061 / BFD_L_IS_LED /aktiv
REM / 3061 / BFD_R_KALTUEBERWACHUNG /nicht_aktiv
REM / 3061 / BFD_R_WARMUEBERWACHUNG /nicht_aktiv
REM / 3061 / BFD_R_IS_LED /aktiv


Rear fog lights

REM / 3061 / NSL_L_KALTUEBERWACHUNG /nicht_aktiv
REM / 3061 / NSL_L_WARMUEBERWACHUNG /nicht_aktiv
REM / 3061 / NSL_L_IS_LED /aktiv
REM / 3061 / NSL_R_KALTUEBERWACHUNG /nicht_aktiv
REM / 3061 / NSL_R_WARMUEBERWACHUNG /nicht_aktiv
REM / 3061 / NSL_R_IS_LED /aktiv




Final result




There is also the possibility of adding the option as if the LCI rear lights were original
just add to the HO-wort (HELC) file and REM code
On the other hand, the 2 blue and green wires of the original bmw wiring (61122410220) are now connected to the A174 * 13B socket.
right side
blue wires location n ° 1 to the REM box (A174) socket (A174 * 13B) location n ° 5
left side
green wires location n ° 1 to the REM box (A174) socket (A174 * 13B) location n ° 13.







If After adding HELC and REM code it does not work check the following lines

REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_L_PWM_LEVEL_1 = 100% [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_R_PWM_LEVEL_1 = 100% [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_L_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_R_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_L_FIXED_PWM = fixed
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_L_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_R_FIXED_PWM = fixed
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_R_PWM_LEVEL_1 = 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_RUECKFAHRL_L_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_RUECKFAHRL_R_PWM_LEVEL_1 = 13.7V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_6_OUTPUT = sl_2_l
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_7_OUTPUT = sl_2_r
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_8_OUTPUT = bfd_l
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_9_OUTPUT = bfd_r
REM_01 > LceOutputChannels 3061 > BFD_L_CCM = ccm_blinker_l
REM_01 > LceOutputChannels 3061 > BFD_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BFD_L_UE_SPG_SCHUTZ = dimmed
REM_01 > LceOutputChannels 3061 > BFD_R_CCM = ccm_blinker_r
REM_01 > LceOutputChannels 3061 > BFD_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BFD_R_UE_SPG_SCHUTZ = dimmed
REM_01 > LceOutputChannels 3061 > BL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BL_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_L_UE_SPG_SCHUTZ = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BL_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_R_UE_SPG_SCHUTZ = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_WARMUEBERWACHUNG = aktiv [Default]
REM_01 > LceOutputChannels 3061 > FRA_H_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_R_WARMUEBERWACHUNG = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > NSL_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_L_UE_SPG_SCHUTZ = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_L_WARMUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_CCM = NEW_ccm_nsl_r
REM_01 > LceOutputChannels 3061 > NSL_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_UE_SPG_SCHUTZ = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_R_WARMUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > RFS_L_CCM = NEW_ccm_rfs_l
REM_01 > LceOutputChannels 3061 > SL_2_L_CCM = Fxx_ccm_sl_2_l
REM_01 > LceOutputChannels 3061 > SL_2_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_2_R_CCM = Fxx_ccm_sl_2_r
REM_01 > LceOutputChannels 3061 > SL_2_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_R_IS_LED = aktiv

[Daftasabrush]

That's an amazing amount of work and skill, well done!

[david51]

Originally Posted by Daftasabrush

That's an amazing amount of work and skill, well done!

Thank you

[knightsabers]

Nice work, David

[david51]

Originally Posted by knightsabers

Nice work, David

Thank you to you too for information

[david51]

For BMW F31 is the same, there is just the exterior lights that are different

Left outer side taillights (63217372209)
Outer side right taillights (63217372210)

[rtruhlar]

Will this work also on F80?

[david51]

Originally Posted by rtruhlar

Will this work also on F80?

yes it is exactly the same

[KGB_123_99]

This is awesome stuff! Thanks!

[david51]

Originally Posted by KGB_123_99

This is awesome stuff! Thanks!

Thank you

[Eat.Sleep.Race]

Awesome!!!

[david51]

Originally Posted by Eat.Sleep.Race

Awesome!!!

[instalher]

now if we can get the parts for under 1k Canadian this is a feasible upgrade.

[SHAZED]

Just what I was looking for

Thank you very much mister..!

[david51]

Originally Posted by SHAZED

Just what I was looking for

Thank you very much mister..!

[Bluesummer]

Does anyone know what's necessary to convert back to Pre LCI? I prefer those better... call me weird :P

[VinnyA320]

Hey guys. I ran a new wire from each inner lci taillight to the box by the battery. Which slots do i put the wires in for the inner turn signals/ brake lights to work? The locations in this guide are currently already used in my F80 for the slot numbers.
Everything else is working besides that. Thanks!

[david51]

Originally Posted by VinnyA320

Hey guys. I ran a new wire from each inner lci taillight to the box by the battery. Which slots do i put the wires in for the inner turn signals/ brake lights to work? The locations in this guide are currently already used in my F80 for the slot numbers.
Everything else is working besides that. Thanks!

Hello

you talk about interior flashing?

[VinnyA320]

Originally Posted by david51

Hello

you talk about interior flashing?

Yep. Already had it done. Thanks anyways! Did your method use flashing or tapping for the inner turn signals?

[david51]

Originally Posted by VinnyA320

Yep. Already had it done. Thanks anyways! Did your method use flashing or tapping for the inner turn signals?

I do not understand your question

[cailas]

What for these things are needed?

Cache left gutter (51497410819)
Cache right channel (51497410820)

[kemiksiz]

Perfect post, thanks a lot in the name of the lci modders