[UKF30]

fitted wheel on Friday and managed to get washed and took picture

see you can't see Calipers and what was point me spending all the money and can't even see it .

i bought full set callipers, discs and pad with sensors for £650 cash on collection and paid to a specialist to fit and he charged me £130 which was very cheap.

i never go Dealers or Stealers as they will have your eyes out for lunch and better off try local good reputable garage .

i dont about states but here in UK we find loads of sets on sale on Ebay for less than £900 .

[MSportTune2]

Originally Posted by 2kredz3

Thanks for the mentions and compliments justin. One thing when installing any brake kit is that you must rigoriously bleed the brakes using high quality brake fluid. I think the ones that complained of a mushy pedal still had air in the brake lines.

Anyway, as always it is a pleasure working with you!

Kelly
Mod Squad Motorsports
www.modsquadmotorsports.com

Can you share the procedure? I had the same brakes done late last year and had it bleeded twice and still have mushy brakes.
Coding was done properly as well. My problem is if I don't drive for a few days, the pedal are mushy once I drive it again but after a few days, it gets better and firmer.

[MSportTune2]

Originally Posted by jtskariah

From what I recall, the front bumper was removed to access the fog lights. The OEM LED fog lights are a direct fit but coding is still required to make them work properly.

If you just buy the led lights and replace them, coding is required. If you bought the full led kit that includes the module and full harness,
it is all taken care of. The full kit includes a pair of new horns but I decided to keep the original as one horn on each side versus both together. The pair of horns is included as the led lights housing are bigger and suppose to have clearance issues if you don't move the horns but I did not have that issue so did not replace the horns provided in the kit.

[jtskariah]

Originally Posted by MSportTune2

If you just buy the led lights and replace them, coding is required. If you bought the full led kit that includes the module and full harness,
it is all taken care of. The full kit includes a pair of new horns but I decided to keep the original as one horn on each side versus both together. The pair of horns is included as the led lights housing are bigger and suppose to have clearance issues if you don't move the horns but I did not have that issue so did not replace the horns provided in the kit.

Did not know about the module and harness! Do you have any links by any chance?

[MSportTune2]

Originally Posted by jtskariah

Did not know about the module and harness! Do you have any links by any chance?

http://www.realoem.com/bmw/enUS/show...diagId=03_2258