[Paul_M3]

So my stage 1 tune came in this afternoon, i installed it properly after I let the car cool off, Went for a test drive and as soon as i got off my driveway.. i got a chassis stabilization error. Anyone know why? or what to do? any other issues i should be aware of with BMS stage 1? oh i ALSO have the BMS N55 intake installed, have had that for a while, no issues with that ever.

Thanks,
Paul

[Mike@N54Tuning.com]

Originally Posted by 335_paul

So my stage 1 tune came in this afternoon, i installed it properly after I let the car cool off, Went for a test drive and as soon as i got off my driveway.. i got a chassis stabilization error. Anyone know why? or what to do? any other issues i should be aware of with BMS stage 1? oh i ALSO have the BMS N55 intake installed, have had that for a while, no issues with that ever.

Thanks,
Paul

Did you unplug battery?

Mike

[dman918]

Originally Posted by Mike@N54Tuning.com

Did you unplug battery?

Mike

Hey Mike / OP,

I had an error at first as well with my JB4. Unplugged battery. The first time I drove it and put it in drive, got an error. It went away within 20 seconds and never came back on. I figured that was normal?

[Mike@N54Tuning.com]

Originally Posted by dman918

Hey Mike / OP,

I had an error at first as well with my JB4. Unplugged battery. The first time I drove it and put it in drive, got an error. It went away within 20 seconds and never came back on. I figured that was normal?

Its from unplugging the battery.. Normal.. Weird, but normal

Mike

[Paul_M3]

Originally Posted by Mike@N54Tuning.com

Did you unplug battery?

Mike

Yessir

[Paul_M3]

Mike and dman,

I went for a drive this morning, no issues or errors other than a traction control light

I was assuming my first error was due to unplugging and replugging the battery. Also i unplugged both terminals, do i need to do both or just negative?

[Jeff@TopGearSolutions]

Originally Posted by 335_paul

Mike and dman,

I went for a drive this morning, no issues or errors other than a traction control light

I was assuming my first error was due to unplugging and replugging the battery. Also i unplugged both terminals, do i need to do both or just negative?

In theory, negative is enough. I still do both out of habit.

[dman918]

I only did negative.

[Mike@N54Tuning.com]

Originally Posted by 335_paul

Mike and dman,

I went for a drive this morning, no issues or errors other than a traction control light

I was assuming my first error was due to unplugging and replugging the battery. Also i unplugged both terminals, do i need to do both or just negative?

Either positve or negative is fine. Once you break the circuit its good.

Mike

[mike@x-ph.com]

Originally Posted by 335_paul

Mike and dman,

I went for a drive this morning, no issues or errors other than a traction control light

I was assuming my first error was due to unplugging and replugging the battery. Also i unplugged both terminals, do i need to do both or just negative?

Glad you are good now

[Paul_M3]

I did both, so doing only negative would be ok?

[Paul_M3]

Originally Posted by mike@x-ph.com

Glad you are good now

Yes doing great now! Bought my intake from You a few months ago!

[Mike@N54Tuning.com]

Originally Posted by 335_paul

I did both, so doing only negative would be ok?

yes

Mike

[Paul_M3]

Originally Posted by Mike@N54Tuning.com

yes

Mike

Alright thanks for the help!

[mookie45]

How's the car now, any new errors?

[Paul_M3]

Originally Posted by mookie45

How's the car now, any new errors?

No new errors! tune is doing great, only concern is rain since it apparently going rain a lot this month in Cali..