05-17-2016, 05:22 PM | #1 |
New Member
10
Rep 27
Posts |
Bought these - help with installation?
Hey everyone, as an alternative to a front CF lip for Non-M sport bumper (I have sport line), I bought these for $170 US.
http://www.ebay.com/itm/252019353874...%3AMEBIDX%3AIT I attempted installation today, but realized the pre drilled holes on the parts did not match with the front bumper screws. On the ebay website it says screws or 3M tape, but no further instructions. They look pretty sweet with Dry fitted, but wanted to see if anyone has these, or any experience installing them, if so, help! Thanks in advance.
__________________
2013 328i Xdrive
Black Sapphire Metallic w/ Dakota Black/Red Highlights | Sport Line | Cold Weather | Premium | Navi | |
05-18-2016, 10:23 AM | #2 |
M3MBER
75
Rep 129
Posts
Drives: F80 M3 -Yas Marina/Silverstone
Join Date: Nov 2015
Location: Mill Creek, WA
|
Just dry fit it, drill your own holes underneath into the bumper using your new pieces as the template, and use these expanding plastic rivets. You can also find similar ones at Lowes or Home Depot
https://www.ecstuning.com/ES126928/?...wi-BoCL8vw_wcB Might not be a bad idea to also use 3M trim adhesive for extra support as well. |
Appreciate
0
|
06-09-2016, 06:29 PM | #5 |
New Member
10
Rep 27
Posts |
Thanks for the help everyone, successful installation!
__________________
2013 328i Xdrive
Black Sapphire Metallic w/ Dakota Black/Red Highlights | Sport Line | Cold Weather | Premium | Navi | |
Appreciate
0
|
08-31-2016, 07:11 AM | #9 |
Private First Class
23
Rep 112
Posts |
I recently acquired a set of these, did you have to remove the existing bolts under the bumper to install these? I noticed mine will not sit flush with the bumper because the bolts were in the way.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|