08-19-2016, 01:06 PM | #1 |
Private
28
Rep 69
Posts |
Cleaning wheels
Anyone here have a recommendation on wheel brushes? Cleaning wheels is more of a chore right now and I would like to enjoy it more. There's a lot of nook and crannies on these 405m wheels I have and would also like to be able to get into the barrel of the rim too. It can be a single brush or multiple. Any ideas?
|
08-19-2016, 05:42 PM | #3 |
Lieutenant Colonel
819
Rep 1,909
Posts |
|
Appreciate
0
|
08-19-2016, 11:33 PM | #4 |
Major
130
Rep 1,101
Posts |
EZ-detail brush. I use Diablo wheel cleaner dilute 4 to 1. Give the wheels a good spray and then give the wheel a brushing. Works great. I have tried many different combo's and find this works great and a bottle of Diablo goes a long way.
|
Appreciate
0
|
08-20-2016, 12:02 AM | #5 | |
Captain
275
Rep 799
Posts |
Quote:
Griot's Garage 15704 Micro Fiber Wheel Wand, (Pack of 2) https://www.amazon.com/dp/B004YMRIC8..._Kk-TxbA5G4C0X For the face of the wheel and sides of wheel spokes, I use a Meguiar's Microfiber Wash Mit For the lug nuts and brake caliper, I use a Boars Hair brush
__________________
|
|
Appreciate
0
|
08-20-2016, 08:36 AM | #6 |
National Championship #17 and Counting!
793
Rep 1,508
Posts |
I use the Speed Master brush, but switch between a variety of cleaners for my 19s.
P21S Gel is the overall best cleaner that I've used followed by Sonax Full-Effect, but both are full strength cleaners and cost a lot. My go to cleaner is Chemical Guys Diablo Gel and dilute just as vanbmw suggested. For the nooks and crannies, I have cheap microfiber towels from Target to get in there by hand and wipe my wheels dry. There are some small brushes that do just fine, but a towel and fingers will work the same.
__________________
2018 i3s - Melbourne Red, Tera World, Ceramic Film all windows
Packs: Technology, Driver Assistance, HK Audio, Park Distance Control |
Appreciate
0
|
08-21-2016, 01:23 PM | #8 |
Private First Class
14
Rep 129
Posts |
EZ wheel brush large and small are good brushes i have both.
I spray mine with Dragon breath or some wolfs ph neutral deironizer. Then i rinse, after rinsing i then give them a once over with some bilberry wheel cleaner which gets rid of any left over crap with the ez brushes. Finishing off with some poorboys wheel sealant to make them easy to clean again |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|