12-03-2012, 12:29 PM | #1 |
Usofstance
78
Rep 671
Posts |
Re Fitment!!
Well i am looking to get 19x10 plus 25 all around!!! Will be running 225/40/19 all around as well. Will it fit, i am going to be slammed? Let me know what i need to do.
__________________
2013 328i 6MT Bagged
IG Stu_UnitedStatesOfStance United States Of Stance |
12-03-2012, 12:39 PM | #2 |
Lieutenant
13
Rep 411
Posts |
Read this thread:
http://www.f30post.com/forums/showthread.php?t=713771 We discuss running 19x10 in the rear. |
Appreciate
0
|
12-03-2012, 04:26 PM | #3 |
Lieutenant Colonel
413
Rep 1,975
Posts |
225 on a 10" wheel? Shiza!!!
__________________
2013 F30 335i ///M-Sport
Forgestar/Challenge/BMS JB4 Wagner/Evo Race/M-Performance 2016 F15 50i ///M-Sport BM3/H&R/Borla |
Appreciate
0
|
12-08-2012, 06:58 PM | #4 |
Private
5
Rep 59
Posts |
Holy stretched batman. 225's on a 10" barrel will be extremely stretched. Are you herrafrushing your ride? Since I don't own an F30, you'll have to do some measurements and report back.
According to my calculations, 19x10 +25 measurements in comparison to a stock 18x8 +34: Hub to outer barrel lip will extend by +1.35~ inches / +34.4~ mm Hub to inner barrel lip will extend by +0.65~ inches / +16.4~ mm Keep in mind, a 10" wheel may not necessarilly be 10" in total width... ie: A 10" Advan wheel is actually 10.5" total width, thus offset and width fine tuning in calculations may be necessary. First major questions: 1. Do you have enough room within your fenders to house the extra width? 2. Do you have enough camber leverage to slam it and tuck your tires/wheels? 3. Are you willing to roll your fenders? 4. Do you really want to drive like this? (lol... sorry, I had to ask this question). |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|