[Alano_Mpower]

hi does the red wire connect to the batteri or do i even need to connect it ?? my jb4 bluetooth is not connecting what am i doing wrong?

[CRJdriver]

Originally Posted by Alano_Mpower

hi does the red wire connect to the batteri or do i even need to connect it ?? my jb4 bluetooth is not connecting what am i doing wrong?

Follow the install guide...
The red wire goes to the battery if you have the older jb4 with a power wire to the battery I would just tap into that...and then ground it to a chassis nut if u have a black wire.

That's literally the only thing you have to do other then connecting it to the jb4...

[Alano_Mpower]

Originally Posted by CRJdriver

Follow the install guide...
The red wire goes to the battery if you have the older jb4 with a power wire to the battery I would just tap into that...and then ground it to a chassis nut if u have a black wire.

That's literally the only thing you have to do other then connecting it to the jb4...

thanks, so i have the new jb4 and connect kit so its still needs to be connected to the batteri right?

[CRJdriver]

Originally Posted by Alano_Mpower

thanks, so i have the new jb4 and connect kit so its still needs to be connected to the batteri right?

yeah.

[Alano_Mpower]

Originally Posted by CRJdriver

yeah.

thanks

[mike@x-ph.com]

Install guide

https://dl.dropboxusercontent.com/u/...0(12-6-15).pdf

[Alano_Mpower]

Originally Posted by mike@x-ph.com

Install guide

https://dl.dropboxusercontent.com/u/...0(12-6-15).pdf

i installed it correctly but the rpm and oil temprature and so on is not working only the boost is working and not even target is working what am i doing wrong ??

the graphics in display mode is not showing only boost is working (just the numbers) but not the graphics??

[mike@x-ph.com]

Originally Posted by Alano_Mpower

i installed it correctly but the rpm and oil temprature and so on is not working only the boost is working and not even target is working what am i doing wrong ??

the graphics in display mode is not showing only boost is working (just the numbers) but not the graphics??

Contact Burger Tuning technical support or post on their forum for some help

[Luminous]

Try restarting the app and your phone. Initially after install I was having the same issue, but was definitely related to the app. Haven't had any issues since though, it's been working great.

Oil and water temps will not display because terry removed them from the latest jb4 firmware due to bandwidth issues. Hopefully the oil temps will be included again soon!

[Alano_Mpower]

Originally Posted by Luminous

Try restarting the app and your phone. Initially after install I was having the same issue, but was definitely related to the app. Haven't had any issues since though, it's been working great.

Oil and water temps will not display because terry removed them from the latest jb4 firmware due to bandwidth issues. Hopefully the oil temps will be included again soon!

okey thanks i will try that and hopefully it will work or else maybe the ap is buggy or maybe my phone is bad ahah im getting a new phone soon

[Alano_Mpower]

Originally Posted by mike@x-ph.com

Contact Burger Tuning technical support or post on their forum for some help

that i will