03-23-2013, 10:26 PM | #1 |
Private
23
Rep 95
Posts |
License Plate Move Kit
Anyone have pictures and tried to move their license plate somewhere else? i need it gone haha
Any good kits to recommend? Looking for fairly cheap but want it done right thanks in advance! |
03-26-2013, 12:14 AM | #2 |
Estorilblau Member
27
Rep 252
Posts |
http://www.turnermotorsport.com/p-14...335i-2012.aspx
If you don't have front PDC, this is the best option. |
Appreciate
0
|
03-26-2013, 12:23 AM | #3 | |
Captain
15
Rep 606
Posts |
Quote:
Modbargins.com makes a kit for and w/o PDC. http://www.**********s.com/No-Holes-...E36-E82-Z3.htm Last edited by 1bad335; 03-26-2013 at 12:34 AM.. |
|
Appreciate
0
|
03-26-2013, 02:39 AM | #4 |
I plead the 5th.
523
Rep 1,519
Posts |
Sorry for the less-than-ideal pic. This is the kit I am using, works great! -> http://www.gominigo.com/BMW.html
__________________
-Matt
|
Appreciate
0
|
03-26-2013, 03:44 PM | #6 |
Captain
15
Rep 606
Posts |
|
Appreciate
0
|
03-31-2013, 08:46 PM | #7 |
New Member
0
Rep 6
Posts |
Being cheap, I took a rubber plug about 1" in dia. drilled a hole in the middle. Put a "gripping" nut on the back and a bolt thru the license plate holder and tightened the bolt until the rubber plug firmly gripped the towing "hole". You do need to offset if you have a sensor there. I didn't want to mess with removing that center piece. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|