[F30Allen]

What's up guys just got my M Performance front splitter delivered. Was wondering if it was worth getting it done at the dealer since it has warranty or should I do it myself or go to Indy shop? I just want it to be installed correctly. Any suggestions? Advice?

[XKxRome0ox]

Originally Posted by F30Allen

What's up guys just got my M Performance front splitter delivered. Was wondering if it was worth getting it done at the dealer since it has warranty or should I do it myself or go to Indy shop? I just want it to be installed correctly. Any suggestions? Advice?

bro
it's the easiest thing to install

if you can't install this on your own, i don't know how you can operate a 3000+ lb piece of machinery on the road

have you even looked at the DIY thread for it?

[tmdals0213]

Originally Posted by XKxRome0ox

bro
it's the easiest thing to install

if you can't install this on your own, i don't know how you can operate a 3000+ lb piece of machinery on the road

have you even looked at the DIY thread for it?

savage

[XKxRome0ox]

Originally Posted by tmdals0213

savage

lol
hey, i'm basing it on the fact that even *I* was able to install the front splitter
without even raising the car up

[dfeng]

Dealers would probably rape you in price. I'm about to order one and looks like it would only take an hour of time.

[Buckeyes]

If you want it done right, do it yourself

[tmdals0213]

Originally Posted by XKxRome0ox

lol
hey, i'm basing it on the fact that even *I* was able to install the front splitter
without even raising the car up

LOL wanna install mine, while i wash your car? haha

[zinner]

The hardest part for me was the beta link and it's application. I made a bit of a mess of it. Just be ready with some solvent to clean away any beta link that squeezes out. Also you need to grab a plastic rivet gun from like harbor frieght.

It's not hard, took me maybe an hour if that.

[hollandog]

Originally Posted by zinner

The hardest part for me was the beta link and it's application. I made a bit of a mess of it. Just be ready with some solvent to clean away any beta link that squeezes out. Also you need to grab a plastic rivet gun from like harbor frieght.

It's not hard, took me maybe an hour if that.

I used 3M double sided tape. No betalink involved.
You can also use the existing rivets on the bumper. I didn't need a rivet gun.

If would be easier to screw in the center screw if you jack up the front of the car.

IMO it's easier than replacing the grills. I had hard time pulling out the grills and ended up breaking both.