[thebadboy]

I found the problem, I had put the value "werte 30" at "IB_Einschalt_begr_lok end IB_Einschalt_begr_ulok

Now the lights working.

By against a "TFL_MODUS" I put the value "Drl_s" I see no difference, normally the light should come on when you start on P?


last thing, I would turn on the anti fog lights when you open the car before it was there "FEM-BODY WL-FUNKTION NSW," now I can not find it? there you change your name?


all thank you for the help

[stu14t]

FEM - 3063

MAPPING_NEBELSCHW_L_PART_OF_WL to soft_on = 01
MAPPING_NEBELSCHW_R_PART_OF_WL to soft_on = 01

The fog lights will come on with welcome lights

[thebadboy]

thank you, I would not have found without you


Can you tell me exactly what==> TFL_MODUS Drl_s I see no difference with Tfl_s

[Almaretto]

Originally Posted by thebadboy

thank you, I would not have found without you


Can you tell me exactly what==> TFL_MODUS Drl_s I see no difference with Tfl_s

Explained here.

There are four switch position (A, 0, 1, 2). For both TFL_S & Drl_S, you should see daytime running lights when switch is in position "A" or "0." With Drl_s, you should additionally see DRL's when switch is in position 1.

[thebadboy]

thank you for the info,


last issue now that all works :-)

When we close the car with the remote control, is it possible that the "angel-eyes and lights daytime" lights some time

thank you

[luckyzxr]

Hello I want to installa steering wheel with pallet in the steering wheel which code needs he to put thank you
my car is 430d f32

[Almaretto]

Originally Posted by luckyzxr

Hello I want to installa steering wheel with pallet in the steering wheel which code needs he to put thank you
my car is 430d f32

Either VO code 2TB or just PADDLES_VERBAUT = aktiv.

[luckyzxr]

thank s Almaretto

[thebadboy]

Originally Posted by thebadboy

thank you for the info,


last issue now that all works :-)

When we close the car with the remote control, is it possible that the "angel-eyes and lights daytime" lights some time

thank you

up please

[Almaretto]

Originally Posted by luckyzxr

thank s Almaretto

[aps]

For those that feel the lock/unlock chirp or beep is too quiet on the F30's I've confirmed a coding fix. I did not like how quiet it was compared to the F10's and I was always paranoid that I did not actually lock the car.

Found this code elsewhere and it did the trick for me on my 2013 335i:

FZD > 3001 (or 3000, depends on your car) > buzzer_high_level > 10
FZD > 3001 (or 3000, depends on your car) > buzzer_low_level > 7

If you are outside the US, apparently you also need to change FZD > ALARM TYPE > US. I didn't change this on mine since it was already set to US.

Would be nice to find a code that would allow me to hear the chirp/beep everytime I press the lock button though.

[Talisman]

Hi everyone,

New here and first post. Got me an F30 2012 sport line with iDrive, Bluetooth and business Nav. I've searched high and low and can't figure out whether I can code it to stream music over bluetooth. Can someone please point me in the right direction. I live in Sydney Australia and plan to see the dealer over the weekend to check what, if anything, can be done.

I've got 6NH and 606 Business Nav.

If not, any alternative suggestions.

Thanks.

[Talisman]

Originally Posted by Talisman

Hi everyone,

New here and first post. Got me an F30 2012 sport line with iDrive, Bluetooth and business Nav. I've searched high and low and can't figure out whether I can code it to stream music over bluetooth. Can someone please point me in the right direction. I live in Sydney Australia and plan to see the dealer over the weekend to check what, if anything, can be done.

I've got 6NH and 606 Business Nav.

If not, any alternative suggestions.

Thanks.

Anyone?

[GarlicBread]

Originally Posted by Talisman

Anyone?

I don't know the answer to your question but as someone who has the bluetooth audio is sounds so much better through usb.

[legaleye3000]

I understand FDL Coding. Can someone explain VO Coding? I would appreciate it. Thank you.

[Almaretto]

Originally Posted by legaleye3000

I understand FDL Coding. Can someone explain VO Coding? I would appreciate it. Thank you.

VO Coding: Reset vehicle to factory values or Add/Remove factory options avoiding manually changing multiple FDL’s

• CONCEPT: Coding of all FDL's (100% of the ECU) to predetermined settings based on the FA (AKA Vehicle Order)
• PROCESS: Connect → Read FA & Activate FA (VO) → Read SVT (VCM) → R-Click ECU (itself ≠ CAFD below) → Select CODE
  • Note: For Crossovers (F15/F16/F85/F86), Read (ECU) rather than Read SVT (VCM)
• You can VO Code using your factory FA, or modified FA as detailed ("How to Change FA" & "VO Coding" pdf's)
• You can also load modified FA’s (skipping steps 8-10 of “Change FA”) so as to not write FA changes to VCM

[legaleye3000]

Originally Posted by Almaretto

VO Coding: Reset vehicle to factory values or Add/Remove factory options avoiding manually changing multiple FDL’s

• CONCEPT: Coding of all FDL's (100% of the ECU) to predetermined settings based on the FA (AKA Vehicle Order)
• PROCESS: Connect → Read FA & Activate FA (VO) → Read SVT (VCM) → R-Click ECU (itself ≠ CAFD below) → Select CODE
  • Note: For Crossovers (F15/F16/F85/F86), Read (ECU) rather than Read SVT (VCM)
• You can VO Code using your factory FA, or modified FA as detailed ("How to Change FA" & "VO Coding" pdf's)
• You can also load modified FA’s (skipping steps 8-10 of “Change FA”) so as to not write FA changes to VCM

So for example, on the cheat sheet, I want to enable office and I have to remove the country controller code. Once I r-click ECU and select Code, where will I find this option to change? Thanks.

[Almaretto]

Originally Posted by legaleye3000

So for example, on the cheat sheet, I want to enable office and I have to remove the country controller code. Once I r-click ECU and select Code, where will I find this option to change? Thanks.

For office function, you do not need to remove the country controller in the US.
If you are VO coding, activated FA will dictate the changes that E-sys will make for you; therefore, an unmodified (or modified if you are adding or removing a factory option) FA is used.

Sometimes VO coding is all the is required; other times it must be followed up with FDL coding to avoid errors. For example, switching microphone number from 2 to 1 (in vehicle with one) after 6NS VO coding or disabling paddles parameter (in vehicle without them) after 2TB Sports Automatic Transmission VO Coding.

[legaleye3000]

I'm trying to do office now. The cheat sheet is very vague for this. Now that you told me I don't have to do the country code, the sheet says to vo code the cmb_media(which I can't find) and HU_NBT. Once I'm in HU_NBT, then what? Thank you.

[Almaretto]

Originally Posted by legaleye3000

I'm trying to do office now. The cheat sheet is very vague for this. Now that you told me I don't have to do the country code, the sheet says to vo code the cmb_media(which I can't find) and HU_NBT. Once I'm in HU_NBT, then what? Thank you.

If you have older HU_CIC, then it is possible to have secondary (CMB_Media or CMB_ECALL).

If you have HU_NBT or HU_NBT2, then there is not a separate Combox.

[etinifni]

Ok so since my car was just retrofitted with new comm box and I-Level was updated do I need a new version on the coding program to re-code everything that was erased? I forgot how annoying double pull on the door handles is.

[insanecoder]

Can I ask a quick question:
in module ASD when I set powerlevel to SL (supertop leistungklasse) I seem to be getting more or higher level active sound in my cabin (340i).
Can anyone else confirm? I set it back to ML (default for 340i) and it just wasnt as sporty sounding.. want to know what everyone else is setting it to ..
I suspect SL is really meant for supercar models?