05-14-2022, 01:55 AM | #1 |
Registered
0
Rep 2
Posts |
help with engine not starting..
Featured on BIMMERPOST.com car cranks but does not start. no significant errors are coming up either on obd2, carly or other prof tools. The only 4 errors I get are: INFO 000001 INFO 1F2802 INFO 21A023 INFO 140011 The two at the bottom, are coming up after 2-3cranks. when I clear them, they reappear. Engine was rebuilt due to a melted piston. Other than misfires on cylinder 3, car was working fine before the rebuild, but now it is more than dead... I ran out of hope and ideas. Any new ideas? (sorry for posting on the b48, could not find a b38 thread Cheers George |
06-03-2022, 12:00 PM | #3 |
Enlisted Member
10
Rep 35
Posts |
Hey sir,
Have you checked fuel pressure? you said that fuel is delivered, but is it at the right pressure? Also: are the fuel injectors equalized and fully working? I would check if any of them are stuck open or stuck closed. Hope it helps! |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|