[Homersbud]

Originally Posted by Jezz

Hi, I bought the f31 2019 vin AE87498, head_unit ENAVEVO. w/o navigation.
I'm really missing CarPlay and reverse backup camera, what's my best option(s).

Looked on AliExpress but there's so much, very confusing.

Upgrading the iDriver controller would also be great as I only have 3 buttons.

Thanks
Jezz

why would you post this on this thread? this is for upgrading your oem cid, not for a backup cam or an idrive controller upgrade or even carplay.

if you have an evo and it has a wlan port, pay a coder to install latest f/w where you can use oem carplay but this is not the thread for that.

[ADHD]

Originally Posted by Homersbud

good luck. make sure you are ready to code the HU to your car as it’s not an easy task. might be better to pay someone to help you out with that.

I can do the basic coding on Esys or bimmercode for Resolution and Size. Ill probably buy the FSC codes and do a USB upload of the codes to activate the Nav.. Seems reasonable for the price and less wiring. Seems the only wiring will be the 2 wires to the idrive to update to the 7button idrive.

[Dalmatinac]

Hi, I have x3 2016 with entry nav NBT HU. I had 6.5, and I have upgraded screen and coded car to brites display and 8.8 1280x480 and set same on HU but I get this:

[Homersbud]

Originally Posted by Dalmatinac

Hi, I have x3 2016 with entry nav NBT HU. I had 6.5, and I have upgraded screen and coded car to brites display and 8.8 1280x480 and set same on HU but I get this:

check other posts above. you need esys to code in the changes instead of bimmercode to fix this problem.

[Dalmatinac]

Is esys still able to work free?
Is there a thread about software solution?

[Homersbud]

Originally Posted by Dalmatinac

Is esys still able to work free?
Is there a thread about software solution?

free app. you’ll need enet cable.

check out the thread below and see if Shawn can provide you a link.

https://f30.bimmerpost.com/forums/sh....php?t=1711432

[Dalmatinac]

I have cable. I will try to code it that way. Is there anything specific or just same coding as bimmer tools?

[Dalmatinac]

I have managed to do it using some YT videos.

Now it shows full screen.

But, my trip computer stopped working, auto time and date stopped working.

How to gain back these functions?

[Homersbud]

Originally Posted by Dalmatinac

I have managed to do it using some YT videos.

Now it shows full screen.

But, my trip computer stopped working, auto time and date stopped working.

How to gain back these functions?

check your fiber optic cable and make sure it’s seated properly.

[Dalmatinac]

Will do. I will let you know if it worked. Thank you

[fortysixand2]

Originally Posted by AzzaF30

You can use 6822626 8.8 screen i have a 2017 f30 with 606 business nav and used this screen, you will need to code in the below as well (older cars need different coding)

3001 EXBOX
- DISPLAY_VARIANTE = breites_display

3005 DISPLAY_PIP_CONFIG
- CID_DISPLAY_SIZE = 8_8
- CID_DISPLAY_RES = 1280_480

3006 NAVIGATION
- DISPLAY_SIZE_RESOLUTION = 8.8_1280x480

i cant comment on the touch screen variant but realoem says you will need 65508709339 if you'd like touch capabilities.

These code changes worked a treat on my 2019 F22 with EVO HU. Cheers Azza.

Similar queries resulted in advising to change the below, but that was not present when I looked in Bimmercode for my car ...
- 3000 HMI DISPLAY_SIZE_RESOLUTION = 8.8_1280x480

Don't forget to amend the display size for your HU type in the Android factory settings too.