05-07-2022, 12:37 PM | #1 |
New Member
0
Rep 9
Posts |
Help with new wheels!
Looking to run this setup for my 2013 328xi. Any input highly appreciated, looking to run this with stock suspension for the time being and a squared setup.
Open to suggestions! |
05-08-2022, 03:56 AM | #2 |
Brigadier General
3082
Rep 4,333
Posts |
Offset is too low. Lot of poke and the outer shoulder of the front tire will rub the fenderwell liner while turning and any tire might rub the fenderlip under compression
|
Appreciate
0
|
05-08-2022, 11:01 AM | #3 |
Private First Class
74
Rep 113
Posts |
Offset is way to low +35 is the absolute minimum you can run on a 9.5 wide square wheel anything lower the wheel will hit front strut suspension parts. Without running spacers.
|
Appreciate
0
|
05-08-2022, 12:08 PM | #5 |
Brigadier General
3082
Rep 4,333
Posts |
since this platform is a model generation old, everything is "been there, done that". there are many threads and posts on any topic you can think of. consider using the [search] and read and inform yourself before posting threads and waiting for responses from the board. sometimes information provided to you may be incorrect, so it's another reason to learn and not just rely on answers from the board.
https://f30.bimmerpost.com/forums/sh...7&postcount=26 https://f30.bimmerpost.com/forums/sh....php?t=1571027 |
Appreciate
0
|
05-08-2022, 03:19 PM | #6 |
First Lieutenant
105
Rep 327
Posts |
Also your center bore is wrong. SHould be 72.6 (actual is 72.56).
__________________
Mods: MHD Stage 2+ FlexFuel, xHP Stage 3, VRSF 5" HD Intercooler, VRSF Charge Pipe, CircuitWerks Catless DP, AFE Pro Dry S Intake filter, Eldor coils, NGK 97506 @ .026, Bilstein B14 coils.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|