[izzyM2]

^^ that looks great but probably too low for my daily driving. How is the ride quality compared to your stock ones?

I'm planning to go from M sport suspension to Sport H&R. Wondering if the ride would be harsher.

[nicof30]

for my daily driving, no problem, for me that's not too low.... The ride quality is the same like stock, no bounce.... nothing, for the moment that's just perfect.

[lenny1jz]

do you have splitter? if so, does it scrape?

[PabloK]

Are you guys worries about wear and tear from the springs?

[nicof30]

Originally Posted by lenny1jz

do you have splitter? if so, does it scrape?

No no that's the h&r stock springs, super sport -45.

nothing more.

[nicof30]

Originally Posted by PabloK

Are you guys worries about wear and tear from the springs?

for my self, i have lowered a lot of car, 7 with h&r, 1 with kw, and 1 with eibach.

Kw are bullshit,1 year and spring broken.
eibach not so low
and h&r just perfect, good lowered, and during in the time.

[T.Maas]

Originally Posted by paperplanes415

this is a terrible picture, Ill get a nicer one once Im out of bed LOL. But I have it lowered on h&r super sports, rear has virtually no gap, and front has a little gap. Im running the stock 17s also. Springs have settled in.

are you running any spacers?

[retiredmarine]

would the splitter scrape with H&R sports?

[inChargeOfIT]

I have had mine on bilstein b8's and eibach pro-kit's for almost a year. Swapped out the runflats as well. Night and day difference. No complaints.

[DrivenByE30]

Agressive and yet not offensive...

This is perfect stance!

[idrive328i]

I like that setup inChargeOfIT

For those with lowering springs, do the fronts look higher than the rears??
I noticed that from the ground to the fender that the rear is lower than the fronts at stock height.

[ric124]

Originally Posted by idrive328i

I like that setup inChargeOfIT

For those with lowering springs, do the fronts look higher than the rears??
I noticed that from the ground to the fender that the rear is lower than the fronts at stock height.

I think this might be true on the 328i

[idrive328i]

Originally Posted by ric124

I think this might be true on the 328i

Is it the same for the 335i's? I want to try lowering springs and see how the car responds, and then move on to a shock/spring combo or coilovers, but I don't want to have the rears look a little lower than the fronts.

[ric124]

Originally Posted by idrive328i

Is it the same for the 335i's? I want to try lowering springs and see how the car responds, and then move on to a shock/spring combo or coilovers, but I don't want to have the rears look a little lower than the fronts.

This is when I had on stock wheels!

[tiber]

Any picters with H&R sports or Ssports and mperformance front spliter? I'm planing to install it to my 335xi but I wonder if I not lose it at the first bumb. I have adaptive m suspension.

[idrive328i]

Originally Posted by ric124

This is when I had on stock wheels!

Oh yeah, that looks goood.
Thanks for the pic!

[rustyminded]

I have the H&R sport springs with spacers front & rear, wonderful setup. although a little bit stiffer but with ditching rf's it will be even better !!

[Jeonglefever]

I was planning to put my f30 on H&R Super Sport Springs and in the near future, purchasing 19in. wheels. Does anyone have any feedback or knowledge on whether or not the wheels would rub against the fenders? Or would you recommend me getting H&R Sport Springs instead? I am riding on stock 17in. wheels right now.

[Masonlake]

I had Megan's and H&M's super sports and they weren't low enough for me. I've done extensive research and I keep hitting dead ends thanks

[Evil_ss]

Does anyone know how much lower the H&R sports springs are compared to M Sport suspension?

[Shashank1997]

Hello guys.
I have a bmw f30 320d, I’m from India.
I recently ordered for the cobra lowering springs with a 30mm drop. I had a few queries regarding the fitment and the safety of the car. Currently I’m running on 245/45/R18 OZ wheels and Continental contisport tyres.


I just got the springs, I haven’t installed them yet. It’s gonna be a 30mm drop. Is there anything else I have to do? I’m currently running on a budget. This is gonna be a daily driver for the new few months.

Any kind of advice is appreciated.
Thanks in advance