04-22-2015, 02:48 PM | #1 |
First Lieutenant
41
Rep 328
Posts |
Rear view camera poor image quality
I installed the oem retrofit kit from BMW for the rear camera option.
I coded the car with e-sys. I didn't get any errors. When the car is in reverse I get a poor image shown on my nbt. Could this be a software issue or something else? I installed it on a F30. Last edited by Teq; 04-25-2015 at 10:26 AM.. |
04-23-2015, 03:18 PM | #3 |
Major
568
Rep 1,035
Posts |
wow.. that's terrible :-(
Is this the OEM retrofit kit (66212361833) that you purchased yourself, or the retrofit kit from Bimmertech, or something else? Were some of the parts used? |
Appreciate
0
|
04-27-2015, 07:25 PM | #5 |
Major
568
Rep 1,035
Posts |
|
Appreciate
0
|
04-29-2015, 03:25 PM | #6 | |
Major
658
Rep 1,478
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
Quote:
What is production date of F30 you installed rear camera on? My car is a 20-14 with a production date of 7/13. I have had a similar problem and I think it is turning out that it has to do with the rear power distribution box (rear fuse box). On my car, when connected to position F154, the picture is fuzzy and we think it is because the voltage at the fuze is 12 volts, but when checking TRSV ECU end, it is about 5 volts, which is the switched off voltage; am trying tapping into a different 15 position Or it could be the connections, including the shield (ground)?
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
|
Appreciate
0
|
04-29-2015, 04:04 PM | #7 |
First Lieutenant
41
Rep 328
Posts |
Production date is 10-2013.
Check you connection because when I measure at the TRSV unit I'll receive 12V. You can also measure at the plug which connects to the camera. You should receive 2x 12V. |
Appreciate
0
|
04-29-2015, 06:37 PM | #8 | |
Major
658
Rep 1,478
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
Quote:
Did you have a bad camera then?
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
|
Appreciate
0
|
04-30-2015, 09:43 AM | #11 |
Major
568
Rep 1,035
Posts |
|
Appreciate
0
|
05-13-2015, 11:22 PM | #13 |
Enlisted Member
7
Rep 41
Posts |
the rear camera can be open when driving at the speed of 120km/h
does anyone kown the code for the function .i have a try for code the fuction : when we are driving the F30 320 at the speed of 120km/h we can open the PDC ,then we can seeThe latter video,I have done this in the REM :
1,D-schwelle _1 werte =32 change to the FF 2,,D-schwelle _2 werte =32 change to the FF 3,,v-schwelle _1 werte =32 change to the FF 4,,v-schwelle _2 werte =32 change to the FF; but the function is not actived ,so we need yours help ,thanks for any suggestion |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|