04-24-2018, 01:27 PM | #1 |
Colonel
2358
Rep 2,964
Posts |
Removed my fogs & no error message...
As the title states - I just removed my fogs fully expecting to need to code out an error message but nothing at all.
After doing some research here and a couple other places that surprises me - but I don't know a lot about these things so maybe someone here will jump in and tell me it'll take a little while to show up? Last edited by chenry; 04-24-2018 at 02:22 PM.. |
04-24-2018, 04:20 PM | #2 |
¯\_(ツ)_/¯
537
Rep 1,000
Posts |
As long as you don't try to turn on the fog lights, you shouldn't get the error message
|
Appreciate
0
|
04-24-2018, 04:44 PM | #3 |
Colonel
2358
Rep 2,964
Posts |
I should have added....when I try to turn them on all I get is this - I wouldn't consider this an error message (or maybe this is what everyone was referring to) also nothing in system check etc
|
Appreciate
0
|
04-24-2018, 04:58 PM | #4 |
Lieutenant General
8243
Rep 16,079
Posts |
I noticed when doing a switch to LED that the fogs don't react the same as the headlights with respect to warm/cold checks. For instance, they receive pulsed voltage when the car is unlocked but the ignition isn't switched on. I didn't delve deeply into what the cause was, I didn't care once I got them working. My educated guess is that they don't throw the same warning as the headlights do, and what you're seeing on the dash is the warning for the fogs. Since you have no reason to turn them on I wouldn't worry about it.
|
Appreciate
0
|
04-24-2018, 08:03 PM | #5 | |
Colonel
2358
Rep 2,964
Posts |
Quote:
|
|
Appreciate
0
|
04-25-2018, 12:26 AM | #6 |
Brigadier General
2594
Rep 3,030
Posts |
Hey looks great! What did you do with the existing wiring? Zip tie off to the side?
__________________
2016 BMW F80 ZCP
Instagram : 7IM3LESS https://instagram.com/7im3less?igshid=YmMyMTA2M2Y= |
Appreciate
0
|
04-25-2018, 08:57 AM | #7 | |
Colonel
2358
Rep 2,964
Posts |
Quote:
Hope this helps |
|
Appreciate
1
7iM3less2593.50 |
05-10-2018, 05:33 PM | #8 | |
Private
32
Rep 86
Posts |
Quote:
Little rocks and road debris causes them to crack. I even used a protective film on the second set and it still did not help.
__________________
2013 F30 335i PWG
VRSF DP/ VRSF FMIC/ ER CP/ AFE Intake Filter/ PowerStop Brakes/ Custom Exhaust/ BM3 Stg 2/ AEM Water Methanol Injection/ MotorSports Hardware Studs, Locks and Spacers |
|
Appreciate
0
|
05-10-2018, 07:29 PM | #9 | |
Colonel
2358
Rep 2,964
Posts |
Quote:
|
|
Appreciate
1
deezeedee33532.00 |
05-11-2018, 05:23 PM | #10 |
Colonel
2358
Rep 2,964
Posts |
Let me add a couple things that may help....
Hope this helps - all in all I would say its a super easy modification and should take maybe an hour - the vast majority of that time is removing and reinstalling screws that support brackets, the bumper etc Last edited by chenry; 05-11-2018 at 07:58 PM.. |
Appreciate
1
deezeedee33532.00 |
Post Reply |
Bookmarks |
|
|